x264源代码简单分析：编码器主干部分-1
=====================================================
H.264源代码分析文章列表：
【编码 - x264】
x264源代码简单分析：x264命令行工具（x264.exe）
x264源代码简单分析：x264_slice_write()
x264源代码简单分析：宏块分析（Analysis）部分-帧内宏块（Intra）
x264源代码简单分析：宏块分析（Analysis）部分-帧间宏块（Inter）
x264源代码简单分析：熵编码（Entropy Encoding）部分
【解码 - libavcodec H.264 解码器】
FFmpeg的H.264解码器源代码简单分析：解析器（Parser）部分
FFmpeg的H.264解码器源代码简单分析：解码器主干部分
FFmpeg的H.264解码器源代码简单分析：熵解码（EntropyDecoding）部分
FFmpeg的H.264解码器源代码简单分析：宏块解码（Decode）部分-帧内宏块（Intra）
FFmpeg的H.264解码器源代码简单分析：宏块解码（Decode）部分-帧间宏块（Inter）
FFmpeg的H.264解码器源代码简单分析：环路滤波（Loop Filter）部分
=====================================================
本文分析x264编码器主干部分的源代码。“主干部分”指的就是libx264中最核心的接口函数——x264_encoder_encode()，以及相关的几个接口函数x264_encoder_open()，x264_encoder_headers()，和x264_encoder_close()。这一部分源代码比较复杂，现在看了半天依然感觉很多地方不太清晰，暂且把已经理解的地方整理出来，以后再慢慢补充还不太清晰的地方。由于主干部分内容比较多，因此打算分成两篇文章来记录：第一篇文章记录x264_encoder_open()，x264_encoder_headers()，和x264_encoder_close()这三个函数，第二篇文章记录x264_encoder_encode()函数。
函数调用关系图
X264编码器主干部分的源代码在整个x264中的位置如下图所示。
X264编码器主干部分的函数调用关系如下图所示。
从图中可以看出，x264主干部分最复杂的函数就是x264_encoder_encode()，该函数完成了编码一帧YUV为H.264码流的工作。与之配合的还有打开编码器的函数x264_encoder_open()，关闭编码器的函数x264_encoder_close()，以及输出SPS/PPS/SEI这样的头信息的x264_encoder_headers()。
x264_encoder_open()用于打开编码器，其中初始化了libx264编码所需要的各种变量。它调用了下面的函数：
x264_validate_parameters()：检查输入参数（例如输入图像的宽高是否为正数）。x264_predict_16x16_init()：初始化Intra16x16帧内预测汇编函数。
x264_predict_4x4_init()：初始化Intra4x4帧内预测汇编函数。
x264_pixel_init()：初始化像素值计算相关的汇编函数（包括SAD、SATD、SSD等）。
x264_dct_init()：初始化DCT变换和DCT反变换相关的汇编函数。
x264_mc_init()：初始化运动补偿相关的汇编函数。
x264_quant_init()：初始化量化和反量化相关的汇编函数。
x264_deblock_init()：初始化去块效应滤波器相关的汇编函数。
x264_lookahead_init()：初始化Lookahead相关的变量。
x264_ratecontrol_new()：初始化码率控制相关的变量。
x264_encoder_headers()输出SPS/PPS/SEI这些H.264码流的头信息。它调用了下面的函数：
x264_sps_write()：输出SPSx264_pps_write()：输出PPS
x264_sei_version_write()：输出SEI
x264_encoder_encode()编码一帧YUV为H.264码流。它调用了下面的函数：
x264_frame_pop_unused()：获取1个x264_frame_t类型结构体fenc。如果frames.unused[]队列不为空，就调用x264_frame_pop()从unused[]队列取1个现成的；否则就调用x264_frame_new()创建一个新的。x264_frame_copy_picture()：将输入的图像数据拷贝至fenc。
x264_lookahead_put_frame()：将fenc放入lookahead.next.list[]队列，等待确定帧类型。
x264_lookahead_get_frames()：通过lookahead分析帧类型。该函数调用了x264_slicetype_decide()，x264_slicetype_analyse()和x264_slicetype_frame_cost()等函数。经过一些列分析之后，最终确定了帧类型信息，并且将帧放入frames.current[]队列。
x264_frame_shift()：从frames.current[]队列取出1帧用于编码。
x264_reference_update()：更新参考帧列表。
x264_reference_reset()：如果为IDR帧，调用该函数清空参考帧列表。
x264_reference_hierarchy_reset()：如果是I（非IDR帧）、P帧、B帧（可做为参考帧），调用该函数。
x264_reference_build_list()：创建参考帧列表list0和list1。
x264_ratecontrol_start()：开启码率控制。
x264_slice_init()：创建 Slice Header。
x264_slices_write()：编码数据（最关键的步骤）。其中调用了x264_slice_write()完成了编码的工作（注意“x264_slices_write()”和“x264_slice_write()”名字差了一个“s”）。
x264_encoder_frame_end()：编码结束后做一些后续处理，例如记录一些统计信息。其中调用了x264_frame_push_unused()将fenc重新放回frames.unused[]队列，并且调用x264_ratecontrol_end()关闭码率控制。
x264_encoder_close()用于关闭解码器，同时输出一些统计信息。它调用了下面的函数：
x264_lookahead_delete()：释放Lookahead相关的变量。x264_ratecontrol_summary()：汇总码率控制信息。
x264_ratecontrol_delete()：关闭码率控制。
本文将会记录x264_encoder_open()，x264_encoder_headers()，和x264_encoder_close()这三个函数的源代码。下一篇文章记录x264_encoder_encode()函数。
x264_encoder_open()
x264_encoder_open()是一个libx264的API。该函数用于打开编码器，其中初始化了libx264编码所需要的各种变量。该函数的声明如下所示。
/* x264_encoder_open: * create a new encoder handler, all parameters from x264_param_t are copied */ x264_t *x264_encoder_open( x264_param_t * );
x264_encoder_open()的定义位于encoder\encoder.c，如下所示。
/****************************************************************************
* x264_encoder_open:
* 注释和处理：雷霄骅
* http://blog.csdn.net/leixiaohua1020
* leixiaohua1020@126.com
****************************************************************************/
//打开编码器
x264_t *x264_encoder_open( x264_param_t *param )
{
x264_t *h;
char buf[1000], *p;
int qp, i_slicetype_length;
CHECKED_MALLOCZERO( h, sizeof(x264_t) );
/* Create a copy of param */
//将参数拷贝进来
memcpy( &h->param, param, sizeof(x264_param_t) );
if( param->param_free )
param->param_free( param );
if( x264_threading_init() )
{
x264_log( h, X264_LOG_ERROR, "unable to initialize threading\n" );
goto fail;
}
//检查输入参数
if( x264_validate_parameters( h, 1 ) < 0 )
goto fail;
if( h->param.psz_cqm_file )
if( x264_cqm_parse_file( h, h->param.psz_cqm_file ) < 0 )
goto fail;
if( h->param.rc.psz_stat_out )
h->param.rc.psz_stat_out = strdup( h->param.rc.psz_stat_out );
if( h->param.rc.psz_stat_in )
h->param.rc.psz_stat_in = strdup( h->param.rc.psz_stat_in );
x264_reduce_fraction( &h->param.i_fps_num, &h->param.i_fps_den );
x264_reduce_fraction( &h->param.i_timebase_num, &h->param.i_timebase_den );
/* Init x264_t */
h->i_frame = -1;
h->i_frame_num = 0;
if( h->param.i_avcintra_class )
h->i_idr_pic_id = 5;
else
h->i_idr_pic_id = 0;
if( (uint64_t)h->param.i_timebase_den * 2 > UINT32_MAX )
{
x264_log( h, X264_LOG_ERROR, "Effective timebase denominator %u exceeds H.264 maximum\n", h->param.i_timebase_den );
goto fail;
}
x264_set_aspect_ratio( h, &h->param, 1 );
//初始化SPS和PPS
x264_sps_init( h->sps, h->param.i_sps_id, &h->param );
x264_pps_init( h->pps, h->param.i_sps_id, &h->param, h->sps );
//检查级Level-通过宏块个数等等
x264_validate_levels( h, 1 );
h->chroma_qp_table = i_chroma_qp_table + 12 + h->pps->i_chroma_qp_index_offset;
if( x264_cqm_init( h ) < 0 )
goto fail;
//各种赋值
h->mb.i_mb_width = h->sps->i_mb_width;
h->mb.i_mb_height = h->sps->i_mb_height;
h->mb.i_mb_count = h->mb.i_mb_width * h->mb.i_mb_height;
h->mb.chroma_h_shift = CHROMA_FORMAT == CHROMA_420 || CHROMA_FORMAT == CHROMA_422;
h->mb.chroma_v_shift = CHROMA_FORMAT == CHROMA_420;
/* Adaptive MBAFF and subme 0 are not supported as we require halving motion
* vectors during prediction, resulting in hpel mvs.
* The chosen solution is to make MBAFF non-adaptive in this case. */
h->mb.b_adaptive_mbaff = PARAM_INTERLACED && h->param.analyse.i_subpel_refine;
/* Init frames. */
if( h->param.i_bframe_adaptive == X264_B_ADAPT_TRELLIS && !h->param.rc.b_stat_read )
h->frames.i_delay = X264_MAX(h->param.i_bframe,3)*4;
else
h->frames.i_delay = h->param.i_bframe;
if( h->param.rc.b_mb_tree || h->param.rc.i_vbv_buffer_size )
h->frames.i_delay = X264_MAX( h->frames.i_delay, h->param.rc.i_lookahead );
i_slicetype_length = h->frames.i_delay;
h->frames.i_delay += h->i_thread_frames - 1;
h->frames.i_delay += h->param.i_sync_lookahead;
h->frames.i_delay += h->param.b_vfr_input;
h->frames.i_bframe_delay = h->param.i_bframe ? (h->param.i_bframe_pyramid ? 2 : 1) : 0;
h->frames.i_max_ref0 = h->param.i_frame_reference;
h->frames.i_max_ref1 = X264_MIN( h->sps->vui.i_num_reorder_frames, h->param.i_frame_reference );
h->frames.i_max_dpb = h->sps->vui.i_max_dec_frame_buffering;
h->frames.b_have_lowres = !h->param.rc.b_stat_read
&& ( h->param.rc.i_rc_method == X264_RC_ABR
|| h->param.rc.i_rc_method == X264_RC_CRF
|| h->param.i_bframe_adaptive
|| h->param.i_scenecut_threshold
|| h->param.rc.b_mb_tree
|| h->param.analyse.i_weighted_pred );
h->frames.b_have_lowres |= h->param.rc.b_stat_read && h->param.rc.i_vbv_buffer_size > 0;
h->frames.b_have_sub8x8_esa = !!(h->param.analyse.inter & X264_ANALYSE_PSUB8x8);
h->frames.i_last_idr =
h->frames.i_last_keyframe = - h->param.i_keyint_max;
h->frames.i_input = 0;
h->frames.i_largest_pts = h->frames.i_second_largest_pts = -1;
h->frames.i_poc_last_open_gop = -1;
//CHECKED_MALLOCZERO(var, size)
//调用malloc()分配内存,然后调用memset()置零
CHECKED_MALLOCZERO( h->frames.unused[0], (h->frames.i_delay + 3) * sizeof(x264_frame_t *) );
/* Allocate room for max refs plus a few extra just in case. */
CHECKED_MALLOCZERO( h->frames.unused[1], (h->i_thread_frames + X264_REF_MAX + 4) * sizeof(x264_frame_t *) );
CHECKED_MALLOCZERO( h->frames.current, (h->param.i_sync_lookahead + h->param.i_bframe
+ h->i_thread_frames + 3) * sizeof(x264_frame_t *) );
if( h->param.analyse.i_weighted_pred > 0 )
CHECKED_MALLOCZERO( h->frames.blank_unused, h->i_thread_frames * 4 * sizeof(x264_frame_t *) );
h->i_ref[0] = h->i_ref[1] = 0;
h->i_cpb_delay = h->i_coded_fields = h->i_disp_fields = 0;
h->i_prev_duration = ((uint64_t)h->param.i_fps_den * h->sps->vui.i_time_scale) / ((uint64_t)h->param.i_fps_num * h->sps->vui.i_num_units_in_tick);
h->i_disp_fields_last_frame = -1;
//RDO初始化
x264_rdo_init();
/* init CPU functions */
//初始化包含汇编优化的函数
//帧内预测
x264_predict_16x16_init( h->param.cpu, h->predict_16x16 );
x264_predict_8x8c_init( h->param.cpu, h->predict_8x8c );
x264_predict_8x16c_init( h->param.cpu, h->predict_8x16c );
x264_predict_8x8_init( h->param.cpu, h->predict_8x8, &h->predict_8x8_filter );
x264_predict_4x4_init( h->param.cpu, h->predict_4x4 );
//SAD等和像素计算有关的函数
x264_pixel_init( h->param.cpu, &h->pixf );
//DCT
x264_dct_init( h->param.cpu, &h->dctf );
//“之”字扫描
x264_zigzag_init( h->param.cpu, &h->zigzagf_progressive, &h->zigzagf_interlaced );
memcpy( &h->zigzagf, PARAM_INTERLACED ? &h->zigzagf_interlaced : &h->zigzagf_progressive, sizeof(h->zigzagf) );
//运动补偿
x264_mc_init( h->param.cpu, &h->mc, h->param.b_cpu_independent );
//量化
x264_quant_init( h, h->param.cpu, &h->quantf );
//去块效应滤波
x264_deblock_init( h->param.cpu, &h->loopf, PARAM_INTERLACED );
x264_bitstream_init( h->param.cpu, &h->bsf );
//初始化CABAC或者是CAVLC
if( h->param.b_cabac )
x264_cabac_init( h );
else
x264_stack_align( x264_cavlc_init, h );
//决定了像素比较的时候用SAD还是SATD
mbcmp_init( h );
chroma_dsp_init( h );
//CPU属性
p = buf + sprintf( buf, "using cpu capabilities:" );
for( int i = 0; x264_cpu_names[i].flags; i++ )
{
if( !strcmp(x264_cpu_names[i].name, "SSE")
&& h->param.cpu & (X264_CPU_SSE2) )
continue;
if( !strcmp(x264_cpu_names[i].name, "SSE2")
&& h->param.cpu & (X264_CPU_SSE2_IS_FAST|X264_CPU_SSE2_IS_SLOW) )
continue;
if( !strcmp(x264_cpu_names[i].name, "SSE3")
&& (h->param.cpu & X264_CPU_SSSE3 || !(h->param.cpu & X264_CPU_CACHELINE_64)) )
continue;
if( !strcmp(x264_cpu_names[i].name, "SSE4.1")
&& (h->param.cpu & X264_CPU_SSE42) )
continue;
if( !strcmp(x264_cpu_names[i].name, "BMI1")
&& (h->param.cpu & X264_CPU_BMI2) )
continue;
if( (h->param.cpu & x264_cpu_names[i].flags) == x264_cpu_names[i].flags
&& (!i || x264_cpu_names[i].flags != x264_cpu_names[i-1].flags) )
p += sprintf( p, " %s", x264_cpu_names[i].name );
}
if( !h->param.cpu )
p += sprintf( p, " none!" );
x264_log( h, X264_LOG_INFO, "%s\n", buf );
float *logs = x264_analyse_prepare_costs( h );
if( !logs )
goto fail;
for( qp = X264_MIN( h->param.rc.i_qp_min, QP_MAX_SPEC ); qp <= h->param.rc.i_qp_max; qp++ )
if( x264_analyse_init_costs( h, logs, qp ) )
goto fail;
if( x264_analyse_init_costs( h, logs, X264_LOOKAHEAD_QP ) )
goto fail;
x264_free( logs );
static const uint16_t cost_mv_correct[7] = { 24, 47, 95, 189, 379, 757, 1515 };
/* Checks for known miscompilation issues. */
if( h->cost_mv[X264_LOOKAHEAD_QP][2013] != cost_mv_correct[BIT_DEPTH-8] )
{
x264_log( h, X264_LOG_ERROR, "MV cost test failed: x264 has been miscompiled!\n" );
goto fail;
}
/* Must be volatile or else GCC will optimize it out. */
volatile int temp = 392;
if( x264_clz( temp ) != 23 )
{
x264_log( h, X264_LOG_ERROR, "CLZ test failed: x264 has been miscompiled!\n" );
#if ARCH_X86 || ARCH_X86_64
x264_log( h, X264_LOG_ERROR, "Are you attempting to run an SSE4a/LZCNT-targeted build on a CPU that\n" );
x264_log( h, X264_LOG_ERROR, "doesn't support it?\n" );
#endif
goto fail;
}
h->out.i_nal = 0;
h->out.i_bitstream = X264_MAX( 1000000, h->param.i_width * h->param.i_height * 4
* ( h->param.rc.i_rc_method == X264_RC_ABR ? pow( 0.95, h->param.rc.i_qp_min )
: pow( 0.95, h->param.rc.i_qp_constant ) * X264_MAX( 1, h->param.rc.f_ip_factor )));
h->nal_buffer_size = h->out.i_bitstream * 3/2 + 4 + 64; /* +4 for startcode, +64 for nal_escape assembly padding */
CHECKED_MALLOC( h->nal_buffer, h->nal_buffer_size );
CHECKED_MALLOC( h->reconfig_h, sizeof(x264_t) );
if( h->param.i_threads > 1 &&
x264_threadpool_init( &h->threadpool, h->param.i_threads, (void*)x264_encoder_thread_init, h ) )
goto fail;
if( h->param.i_lookahead_threads > 1 &&
x264_threadpool_init( &h->lookaheadpool, h->param.i_lookahead_threads, NULL, NULL ) )
goto fail;
#if HAVE_OPENCL
if( h->param.b_opencl )
{
h->opencl.ocl = x264_opencl_load_library();
if( !h->opencl.ocl )
{
x264_log( h, X264_LOG_WARNING, "failed to load OpenCL\n" );
h->param.b_opencl = 0;
}
}
#endif
h->thread[0] = h;
for( int i = 1; i < h->param.i_threads + !!h->param.i_sync_lookahead; i++ )
CHECKED_MALLOC( h->thread[i], sizeof(x264_t) );
if( h->param.i_lookahead_threads > 1 )
for( int i = 0; i < h->param.i_lookahead_threads; i++ )
{
CHECKED_MALLOC( h->lookahead_thread[i], sizeof(x264_t) );
*h->lookahead_thread[i] = *h;
}
*h->reconfig_h = *h;
for( int i = 0; i < h->param.i_threads; i++ )
{
int init_nal_count = h->param.i_slice_count + 3;
int allocate_threadlocal_data = !h->param.b_sliced_threads || !i;
if( i > 0 )
*h->thread[i] = *h;
if( x264_pthread_mutex_init( &h->thread[i]->mutex, NULL ) )
goto fail;
if( x264_pthread_cond_init( &h->thread[i]->cv, NULL ) )
goto fail;
if( allocate_threadlocal_data )
{
h->thread[i]->fdec = x264_frame_pop_unused( h, 1 );
if( !h->thread[i]->fdec )
goto fail;
}
else
h->thread[i]->fdec = h->thread[0]->fdec;
CHECKED_MALLOC( h->thread[i]->out.p_bitstream, h->out.i_bitstream );
/* Start each thread with room for init_nal_count NAL units; it'll realloc later if needed. */
CHECKED_MALLOC( h->thread[i]->out.nal, init_nal_count*sizeof(x264_nal_t) );
h->thread[i]->out.i_nals_allocated = init_nal_count;
if( allocate_threadlocal_data && x264_macroblock_cache_allocate( h->thread[i] ) < 0 )
goto fail;
}
#if HAVE_OPENCL
if( h->param.b_opencl && x264_opencl_lookahead_init( h ) < 0 )
h->param.b_opencl = 0;
#endif
//初始化lookahead
if( x264_lookahead_init( h, i_slicetype_length ) )
goto fail;
for( int i = 0; i < h->param.i_threads; i++ )
if( x264_macroblock_thread_allocate( h->thread[i], 0 ) < 0 )
goto fail;
//创建码率控制
if( x264_ratecontrol_new( h ) < 0 )
goto fail;
if( h->param.i_nal_hrd )
{
x264_log( h, X264_LOG_DEBUG, "HRD bitrate: %i bits/sec\n", h->sps->vui.hrd.i_bit_rate_unscaled );
x264_log( h, X264_LOG_DEBUG, "CPB size: %i bits\n", h->sps->vui.hrd.i_cpb_size_unscaled );
}
if( h->param.psz_dump_yuv )
{
/* create or truncate the reconstructed video file */
FILE *f = x264_fopen( h->param.psz_dump_yuv, "w" );
if( !f )
{
x264_log( h, X264_LOG_ERROR, "dump_yuv: can't write to %s\n", h->param.psz_dump_yuv );
goto fail;
}
else if( !x264_is_regular_file( f ) )
{
x264_log( h, X264_LOG_ERROR, "dump_yuv: incompatible with non-regular file %s\n", h->param.psz_dump_yuv );
goto fail;
}
fclose( f );
}
//这写法......
const char *profile = h->sps->i_profile_idc == PROFILE_BASELINE ? "Constrained Baseline" :
h->sps->i_profile_idc == PROFILE_MAIN ? "Main" :
h->sps->i_profile_idc == PROFILE_HIGH ? "High" :
h->sps->i_profile_idc == PROFILE_HIGH10 ? (h->sps->b_constraint_set3 == 1 ? "High 10 Intra" : "High 10") :
h->sps->i_profile_idc == PROFILE_HIGH422 ? (h->sps->b_constraint_set3 == 1 ? "High 4:2:2 Intra" : "High 4:2:2") :
h->sps->b_constraint_set3 == 1 ? "High 4:4:4 Intra" : "High 4:4:4 Predictive";
char level[4];
snprintf( level, sizeof(level), "%d.%d", h->sps->i_level_idc/10, h->sps->i_level_idc%10 );
if( h->sps->i_level_idc == 9 || ( h->sps->i_level_idc == 11 && h->sps->b_constraint_set3 &&
(h->sps->i_profile_idc == PROFILE_BASELINE || h->sps->i_profile_idc == PROFILE_MAIN) ) )
strcpy( level, "1b" );
//输出型和级
if( h->sps->i_profile_idc < PROFILE_HIGH10 )
{
x264_log( h, X264_LOG_INFO, "profile %s, level %s\n",
profile, level );
}
else
{
static const char * const subsampling[4] = { "4:0:0", "4:2:0", "4:2:2", "4:4:4" };
x264_log( h, X264_LOG_INFO, "profile %s, level %s, %s %d-bit\n",
profile, level, subsampling[CHROMA_FORMAT], BIT_DEPTH );
}
return h;
fail:
//释放
x264_free( h );
return NULL;
}
由于源代码中已经做了比较详细的注释，在这里就不重复叙述了。下面根据函数调用的顺序，看一下x264_encoder_open()调用的下面几个函数：
x264_sps_init()：根据输入参数生成H.264码流的SPS信息。
x264_pps_init()：根据输入参数生成H.264码流的PPS信息。
x264_predict_16x16_init()：初始化Intra16x16帧内预测汇编函数。
x264_predict_4x4_init()：初始化Intra4x4帧内预测汇编函数。
x264_pixel_init()：初始化像素值计算相关的汇编函数（包括SAD、SATD、SSD等）。
x264_dct_init()：初始化DCT变换和DCT反变换相关的汇编函数。
x264_mc_init()：初始化运动补偿相关的汇编函数。
x264_quant_init()：初始化量化和反量化相关的汇编函数。
x264_deblock_init()：初始化去块效应滤波器相关的汇编函数。
mbcmp_init()：决定像素比较的时候使用SAD还是SATD。
x264_sps_init()
x264_sps_init()根据输入参数生成H.264码流的SPS （Sequence Parameter Set，序列参数集）信息。该函数的定义位于encoder\set.c，如下所示。
//初始化SPS
void x264_sps_init( x264_sps_t *sps, int i_id, x264_param_t *param )
{
int csp = param->i_csp & X264_CSP_MASK;
sps->i_id = i_id;
//以宏块为单位的宽度
sps->i_mb_width = ( param->i_width + 15 ) / 16;
//以宏块为单位的高度
sps->i_mb_height= ( param->i_height + 15 ) / 16;
//色度取样格式
sps->i_chroma_format_idc = csp >= X264_CSP_I444 ? CHROMA_444 :
csp >= X264_CSP_I422 ? CHROMA_422 : CHROMA_420;
sps->b_qpprime_y_zero_transform_bypass = param->rc.i_rc_method == X264_RC_CQP && param->rc.i_qp_constant == 0;
//型profile
if( sps->b_qpprime_y_zero_transform_bypass || sps->i_chroma_format_idc == CHROMA_444 )
sps->i_profile_idc = PROFILE_HIGH444_PREDICTIVE;//YUV444的时候
else if( sps->i_chroma_format_idc == CHROMA_422 )
sps->i_profile_idc = PROFILE_HIGH422;
else if( BIT_DEPTH > 8 )
sps->i_profile_idc = PROFILE_HIGH10;
else if( param->analyse.b_transform_8x8 || param->i_cqm_preset != X264_CQM_FLAT )
sps->i_profile_idc = PROFILE_HIGH;//高型 High Profile 目前最常见
else if( param->b_cabac || param->i_bframe > 0 || param->b_interlaced || param->b_fake_interlaced || param->analyse.i_weighted_pred > 0 )
sps->i_profile_idc = PROFILE_MAIN;//主型
else
sps->i_profile_idc = PROFILE_BASELINE;//基本型
sps->b_constraint_set0 = sps->i_profile_idc == PROFILE_BASELINE;
/* x264 doesn't support the features that are in Baseline and not in Main,
* namely arbitrary_slice_order and slice_groups. */
sps->b_constraint_set1 = sps->i_profile_idc <= PROFILE_MAIN;
/* Never set constraint_set2, it is not necessary and not used in real world. */
sps->b_constraint_set2 = 0;
sps->b_constraint_set3 = 0;
//级level
sps->i_level_idc = param->i_level_idc;
if( param->i_level_idc == 9 && ( sps->i_profile_idc == PROFILE_BASELINE || sps->i_profile_idc == PROFILE_MAIN ) )
{
sps->b_constraint_set3 = 1; /* level 1b with Baseline or Main profile is signalled via constraint_set3 */
sps->i_level_idc = 11;
}
/* Intra profiles */
if( param->i_keyint_max == 1 && sps->i_profile_idc > PROFILE_HIGH )
sps->b_constraint_set3 = 1;
sps->vui.i_num_reorder_frames = param->i_bframe_pyramid ? 2 : param->i_bframe ? 1 : 0;
/* extra slot with pyramid so that we don't have to override the
* order of forgetting old pictures */
//参考帧数量
sps->vui.i_max_dec_frame_buffering =
sps->i_num_ref_frames = X264_MIN(X264_REF_MAX, X264_MAX4(param->i_frame_reference, 1 + sps->vui.i_num_reorder_frames,
param->i_bframe_pyramid ? 4 : 1, param->i_dpb_size));
sps->i_num_ref_frames -= param->i_bframe_pyramid == X264_B_PYRAMID_STRICT;
if( param->i_keyint_max == 1 )
{
sps->i_num_ref_frames = 0;
sps->vui.i_max_dec_frame_buffering = 0;
}
/* number of refs + current frame */
int max_frame_num = sps->vui.i_max_dec_frame_buffering * (!!param->i_bframe_pyramid+1) + 1;
/* Intra refresh cannot write a recovery time greater than max frame num-1 */
if( param->b_intra_refresh )
{
int time_to_recovery = X264_MIN( sps->i_mb_width - 1, param->i_keyint_max ) + param->i_bframe - 1;
max_frame_num = X264_MAX( max_frame_num, time_to_recovery+1 );
}
sps->i_log2_max_frame_num = 4;
while( (1 << sps->i_log2_max_frame_num) <= max_frame_num )
sps->i_log2_max_frame_num++;
//POC类型
sps->i_poc_type = param->i_bframe || param->b_interlaced ? 0 : 2;
if( sps->i_poc_type == 0 )
{
int max_delta_poc = (param->i_bframe + 2) * (!!param->i_bframe_pyramid + 1) * 2;
sps->i_log2_max_poc_lsb = 4;
while( (1 << sps->i_log2_max_poc_lsb) <= max_delta_poc * 2 )
sps->i_log2_max_poc_lsb++;
}
sps->b_vui = 1;
sps->b_gaps_in_frame_num_value_allowed = 0;
sps->b_frame_mbs_only = !(param->b_interlaced || param->b_fake_interlaced);
if( !sps->b_frame_mbs_only )
sps->i_mb_height = ( sps->i_mb_height + 1 ) & ~1;
sps->b_mb_adaptive_frame_field = param->b_interlaced;
sps->b_direct8x8_inference = 1;
sps->crop.i_left = param->crop_rect.i_left;
sps->crop.i_top = param->crop_rect.i_top;
sps->crop.i_right = param->crop_rect.i_right + sps->i_mb_width*16 - param->i_width;
sps->crop.i_bottom = (param->crop_rect.i_bottom + sps->i_mb_height*16 - param->i_height) >> !sps->b_frame_mbs_only;
sps->b_crop = sps->crop.i_left || sps->crop.i_top ||
sps->crop.i_right || sps->crop.i_bottom;
sps->vui.b_aspect_ratio_info_present = 0;
if( param->vui.i_sar_width > 0 && param->vui.i_sar_height > 0 )
{
sps->vui.b_aspect_ratio_info_present = 1;
sps->vui.i_sar_width = param->vui.i_sar_width;
sps->vui.i_sar_height= param->vui.i_sar_height;
}
sps->vui.b_overscan_info_present = param->vui.i_overscan > 0 && param->vui.i_overscan <= 2;
if( sps->vui.b_overscan_info_present )
sps->vui.b_overscan_info = ( param->vui.i_overscan == 2 ? 1 : 0 );
sps->vui.b_signal_type_present = 0;
sps->vui.i_vidformat = ( param->vui.i_vidformat >= 0 && param->vui.i_vidformat <= 5 ? param->vui.i_vidformat : 5 );
sps->vui.b_fullrange = ( param->vui.b_fullrange >= 0 && param->vui.b_fullrange <= 1 ? param->vui.b_fullrange :
( csp >= X264_CSP_BGR ? 1 : 0 ) );
sps->vui.b_color_description_present = 0;
sps->vui.i_colorprim = ( param->vui.i_colorprim >= 0 && param->vui.i_colorprim <= 9 ? param->vui.i_colorprim : 2 );
sps->vui.i_transfer = ( param->vui.i_transfer >= 0 && param->vui.i_transfer <= 15 ? param->vui.i_transfer : 2 );
sps->vui.i_colmatrix = ( param->vui.i_colmatrix >= 0 && param->vui.i_colmatrix <= 10 ? param->vui.i_colmatrix :
( csp >= X264_CSP_BGR ? 0 : 2 ) );
if( sps->vui.i_colorprim != 2 ||
sps->vui.i_transfer != 2 ||
sps->vui.i_colmatrix != 2 )
{
sps->vui.b_color_description_present = 1;
}
if( sps->vui.i_vidformat != 5 ||
sps->vui.b_fullrange ||
sps->vui.b_color_description_present )
{
sps->vui.b_signal_type_present = 1;
}
/* FIXME: not sufficient for interlaced video */
sps->vui.b_chroma_loc_info_present = param->vui.i_chroma_loc > 0 && param->vui.i_chroma_loc <= 5 &&
sps->i_chroma_format_idc == CHROMA_420;
if( sps->vui.b_chroma_loc_info_present )
{
sps->vui.i_chroma_loc_top = param->vui.i_chroma_loc;
sps->vui.i_chroma_loc_bottom = param->vui.i_chroma_loc;
}
sps->vui.b_timing_info_present = param->i_timebase_num > 0 && param->i_timebase_den > 0;
if( sps->vui.b_timing_info_present )
{
sps->vui.i_num_units_in_tick = param->i_timebase_num;
sps->vui.i_time_scale = param->i_timebase_den * 2;
sps->vui.b_fixed_frame_rate = !param->b_vfr_input;
}
sps->vui.b_vcl_hrd_parameters_present = 0; // we don't support VCL HRD
sps->vui.b_nal_hrd_parameters_present = !!param->i_nal_hrd;
sps->vui.b_pic_struct_present = param->b_pic_struct;
// NOTE: HRD related parts of the SPS are initialised in x264_ratecontrol_init_reconfigurable
sps->vui.b_bitstream_restriction = param->i_keyint_max > 1;
if( sps->vui.b_bitstream_restriction )
{
sps->vui.b_motion_vectors_over_pic_boundaries = 1;
sps->vui.i_max_bytes_per_pic_denom = 0;
sps->vui.i_max_bits_per_mb_denom = 0;
sps->vui.i_log2_max_mv_length_horizontal =
sps->vui.i_log2_max_mv_length_vertical = (int)log2f( X264_MAX( 1, param->analyse.i_mv_range*4-1 ) ) + 1;
}
}
从源代码可以看出，x264_sps_init()根据输入参数集x264_param_t中的信息，初始化了SPS结构体中的成员变量。有关这些成员变量的具体信息，可以参考《H.264标准》。
x264_pps_init()
x264_pps_init()根据输入参数生成H.264码流的PPS（Picture Parameter Set，图像参数集）信息。该函数的定义位于encoder\set.c，如下所示。
//初始化PPS
void x264_pps_init( x264_pps_t *pps, int i_id, x264_param_t *param, x264_sps_t *sps )
{
pps->i_id = i_id;
//所属的SPS
pps->i_sps_id = sps->i_id;
//是否使用CABAC？
pps->b_cabac = param->b_cabac;
pps->b_pic_order = !param->i_avcintra_class && param->b_interlaced;
pps->i_num_slice_groups = 1;
//目前参考帧队列的长度
//注意是这个队列中当前实际的、已存在的参考帧数目，这从它的名字“active”中也可以看出来。
pps->i_num_ref_idx_l0_default_active = param->i_frame_reference;
pps->i_num_ref_idx_l1_default_active = 1;
//加权预测
pps->b_weighted_pred = param->analyse.i_weighted_pred > 0;
pps->b_weighted_bipred = param->analyse.b_weighted_bipred ? 2 : 0;
//量化参数QP的初始值
pps->i_pic_init_qp = param->rc.i_rc_method == X264_RC_ABR || param->b_stitchable ? 26 + QP_BD_OFFSET : SPEC_QP( param->rc.i_qp_constant );
pps->i_pic_init_qs = 26 + QP_BD_OFFSET;
pps->i_chroma_qp_index_offset = param->analyse.i_chroma_qp_offset;
pps->b_deblocking_filter_control = 1;
pps->b_constrained_intra_pred = param->b_constrained_intra;
pps->b_redundant_pic_cnt = 0;
pps->b_transform_8x8_mode = param->analyse.b_transform_8x8 ? 1 : 0;
pps->i_cqm_preset = param->i_cqm_preset;
switch( pps->i_cqm_preset )
{
case X264_CQM_FLAT:
for( int i = 0; i < 8; i++ )
pps->scaling_list[i] = x264_cqm_flat16;
break;
case X264_CQM_JVT:
for( int i = 0; i < 8; i++ )
pps->scaling_list[i] = x264_cqm_jvt[i];
break;
case X264_CQM_CUSTOM:
/* match the transposed DCT & zigzag */
transpose( param->cqm_4iy, 4 );
transpose( param->cqm_4py, 4 );
transpose( param->cqm_4ic, 4 );
transpose( param->cqm_4pc, 4 );
transpose( param->cqm_8iy, 8 );
transpose( param->cqm_8py, 8 );
transpose( param->cqm_8ic, 8 );
transpose( param->cqm_8pc, 8 );
pps->scaling_list[CQM_4IY] = param->cqm_4iy;
pps->scaling_list[CQM_4PY] = param->cqm_4py;
pps->scaling_list[CQM_4IC] = param->cqm_4ic;
pps->scaling_list[CQM_4PC] = param->cqm_4pc;
pps->scaling_list[CQM_8IY+4] = param->cqm_8iy;
pps->scaling_list[CQM_8PY+4] = param->cqm_8py;
pps->scaling_list[CQM_8IC+4] = param->cqm_8ic;
pps->scaling_list[CQM_8PC+4] = param->cqm_8pc;
for( int i = 0; i < 8; i++ )
for( int j = 0; j < (i < 4 ? 16 : 64); j++ )
if( pps->scaling_list[i][j] == 0 )
pps->scaling_list[i] = x264_cqm_jvt[i];
break;
}
}
从源代码可以看出，x264_pps_init()根据输入参数集x264_param_t中的信息，初始化了PPS结构体中的成员变量。有关这些成员变量的具体信息，可以参考《H.264标准》。
x264_predict_16x16_init()
x264_predict_16x16_init()用于初始化Intra16x16帧内预测汇编函数。该函数的定义位于x264\common\predict.c，如下所示。
//Intra16x16帧内预测汇编函数初始化
void x264_predict_16x16_init( int cpu, x264_predict_t pf[7] )
{
//C语言版本
//================================================
//垂直 Vertical
pf[I_PRED_16x16_V ] = x264_predict_16x16_v_c;
//水平 Horizontal
pf[I_PRED_16x16_H ] = x264_predict_16x16_h_c;
//DC
pf[I_PRED_16x16_DC] = x264_predict_16x16_dc_c;
//Plane
pf[I_PRED_16x16_P ] = x264_predict_16x16_p_c;
//这几种是啥？
pf[I_PRED_16x16_DC_LEFT]= x264_predict_16x16_dc_left_c;
pf[I_PRED_16x16_DC_TOP ]= x264_predict_16x16_dc_top_c;
pf[I_PRED_16x16_DC_128 ]= x264_predict_16x16_dc_128_c;
//================================================
//MMX版本
#if HAVE_MMX
x264_predict_16x16_init_mmx( cpu, pf );
#endif
//ALTIVEC版本
#if HAVE_ALTIVEC
if( cpu&X264_CPU_ALTIVEC )
x264_predict_16x16_init_altivec( pf );
#endif
//ARMV6版本
#if HAVE_ARMV6
x264_predict_16x16_init_arm( cpu, pf );
#endif
//AARCH64版本
#if ARCH_AARCH64
x264_predict_16x16_init_aarch64( cpu, pf );
#endif
}
从源代码可看出，x264_predict_16x16_init()首先对帧内预测函数指针数组x264_predict_t[]中的元素赋值了C语言版本的函数x264_predict_16x16_v_c()，x264_predict_16x16_h_c()，x264_predict_16x16_dc_c()，x264_predict_16x16_p_c()；然后会判断系统平台的特性，如果平台支持的话，会调用x264_predict_16x16_init_mmx()，x264_predict_16x16_init_arm()等给x264_predict_t[]中的元素赋值经过汇编优化的函数。下文将会简单看几个其中的函数。
相关知识简述
简单记录一下帧内预测的方法。帧内预测根据宏块左边和上边的边界像素值推算宏块内部的像素值，帧内预测的效果如下图所示。其中左边的图为图像原始画面，右边的图为经过帧内预测后没有叠加残差的画面。
H.264中有两种帧内预测模式：16x16亮度帧内预测模式和4x4亮度帧内预测模式。其中16x16帧内预测模式一共有4种，如下图所示。
这4种模式列表如下。
|
模式 |
描述 |
|
Vertical |
由上边像素推出相应像素值 |
|
Horizontal |
由左边像素推出相应像素值 |
|
DC |
由上边和左边像素平均值推出相应像素值 |
|
Plane |
由上边和左边像素推出相应像素值 |
4x4帧内预测模式一共有9种，如下图所示。
有关Intra4x4的帧内预测模式的代码将在后文中进行记录。下面举例看一下Intra16x16的Vertical预测模式的实现函数x264_predict_16x16_v_c()。
x264_predict_16x16_v_c()
x264_predict_16x16_v_c()实现了Intra16x16的Vertical预测模式。该函数的定义位于common\predict.c，如下所示。
//16x16帧内预测
//垂直预测（Vertical）
void x264_predict_16x16_v_c( pixel *src )
{
/*
* Vertical预测方式
* |X1 X2 X3 X4
* --+-----------
* |X1 X2 X3 X4
* |X1 X2 X3 X4
* |X1 X2 X3 X4
* |X1 X2 X3 X4
*
*/
/*
* 【展开宏定义】
* uint32_t v0 = ((x264_union32_t*)(&src[ 0-FDEC_STRIDE]))->i;
* uint32_t v1 = ((x264_union32_t*)(&src[ 4-FDEC_STRIDE]))->i;
* uint32_t v2 = ((x264_union32_t*)(&src[ 8-FDEC_STRIDE]))->i;
* uint32_t v3 = ((x264_union32_t*)(&src[12-FDEC_STRIDE]))->i;
* 在这里，上述代码实际上相当于：
* uint32_t v0 = *((uint32_t*)(&src[ 0-FDEC_STRIDE]));
* uint32_t v1 = *((uint32_t*)(&src[ 4-FDEC_STRIDE]));
* uint32_t v2 = *((uint32_t*)(&src[ 8-FDEC_STRIDE]));
* uint32_t v3 = *((uint32_t*)(&src[12-FDEC_STRIDE]));
* 即分成4次，每次取出4个像素（一共16个像素），分别赋值给v0，v1，v2，v3
* 取出的值源自于16x16块上面的一行像素
* 0| 4 8 12 16
* || v0 | v1 | v2 | v3 |
* ---++==========+==========+==========+==========+
* ||
* ||
* ||
* ||
* ||
* ||
*
*/
//pixel4实际上是uint32_t（占用32bit），存储4个像素的值（每个像素占用8bit）
pixel4 v0 = MPIXEL_X4( &src[ 0-FDEC_STRIDE] );
pixel4 v1 = MPIXEL_X4( &src[ 4-FDEC_STRIDE] );
pixel4 v2 = MPIXEL_X4( &src[ 8-FDEC_STRIDE] );
pixel4 v3 = MPIXEL_X4( &src[12-FDEC_STRIDE] );
//循环赋值16行
for( int i = 0; i < 16; i++ )
{
//【展开宏定义】
//(((x264_union32_t*)(src+ 0))->i) = v0;
//(((x264_union32_t*)(src+ 4))->i) = v1;
//(((x264_union32_t*)(src+ 8))->i) = v2;
//(((x264_union32_t*)(src+12))->i) = v3;
//即分成4次，每次赋值4个像素
//
MPIXEL_X4( src+ 0 ) = v0;
MPIXEL_X4( src+ 4 ) = v1;
MPIXEL_X4( src+ 8 ) = v2;
MPIXEL_X4( src+12 ) = v3;
//下一行
//FDEC_STRIDE=32,是重建宏块缓存fdec_buf一行的数据量
src += FDEC_STRIDE;
}
}
从源代码可以看出，x264_predict_16x16_v_c()首先取出了16x16图像块上面一行16个像素的值存储在v0，v1，v2，v3四个变量中（每个变量存储4个像素），然后循环16次将v0，v1，v2，v3赋值给16x16图像块的16行。
看完C语言版本Intra16x16的Vertical预测模式的实现函数之后，我们可以继续看一下该预测模式汇编语言版本的实现函数。从前面的初始化函数中已经可以看出，当系统支持X86汇编的时候，会调用x264_predict_16x16_init_mmx()初始化x86汇编优化过的函数；当系统支持ARM的时候，会调用x264_predict_16x16_init_arm()初始化ARM汇编优化过的函数。
x264_predict_16x16_init_mmx()
x264_predict_16x16_init_mmx()用于初始化经过x86汇编优化过的Intra16x16的帧内预测函数。该函数的定义位于common\x86\predict-c.c（在“x86”子文件夹下），如下所示。
//Intra16x16帧内预测汇编函数-MMX版本
void x264_predict_16x16_init_mmx( int cpu, x264_predict_t pf[7] )
{
if( !(cpu&X264_CPU_MMX2) )
return;
pf[I_PRED_16x16_DC] = x264_predict_16x16_dc_mmx2;
pf[I_PRED_16x16_DC_TOP] = x264_predict_16x16_dc_top_mmx2;
pf[I_PRED_16x16_DC_LEFT] = x264_predict_16x16_dc_left_mmx2;
pf[I_PRED_16x16_V] = x264_predict_16x16_v_mmx2;
pf[I_PRED_16x16_H] = x264_predict_16x16_h_mmx2;
#if HIGH_BIT_DEPTH
if( !(cpu&X264_CPU_SSE) )
return;
pf[I_PRED_16x16_V] = x264_predict_16x16_v_sse;
if( !(cpu&X264_CPU_SSE2) )
return;
pf[I_PRED_16x16_DC] = x264_predict_16x16_dc_sse2;
pf[I_PRED_16x16_DC_TOP] = x264_predict_16x16_dc_top_sse2;
pf[I_PRED_16x16_DC_LEFT] = x264_predict_16x16_dc_left_sse2;
pf[I_PRED_16x16_H] = x264_predict_16x16_h_sse2;
pf[I_PRED_16x16_P] = x264_predict_16x16_p_sse2;
if( !(cpu&X264_CPU_AVX) )
return;
pf[I_PRED_16x16_V] = x264_predict_16x16_v_avx;
if( !(cpu&X264_CPU_AVX2) )
return;
pf[I_PRED_16x16_H] = x264_predict_16x16_h_avx2;
#else
#if !ARCH_X86_64
pf[I_PRED_16x16_P] = x264_predict_16x16_p_mmx2;
#endif
if( !(cpu&X264_CPU_SSE) )
return;
pf[I_PRED_16x16_V] = x264_predict_16x16_v_sse;
if( !(cpu&X264_CPU_SSE2) )
return;
pf[I_PRED_16x16_DC] = x264_predict_16x16_dc_sse2;
if( cpu&X264_CPU_SSE2_IS_SLOW )
return;
pf[I_PRED_16x16_DC_TOP] = x264_predict_16x16_dc_top_sse2;
pf[I_PRED_16x16_DC_LEFT] = x264_predict_16x16_dc_left_sse2;
pf[I_PRED_16x16_P] = x264_predict_16x16_p_sse2;
if( !(cpu&X264_CPU_SSSE3) )
return;
if( !(cpu&X264_CPU_SLOW_PSHUFB) )
pf[I_PRED_16x16_H] = x264_predict_16x16_h_ssse3;
#if HAVE_X86_INLINE_ASM
pf[I_PRED_16x16_P] = x264_predict_16x16_p_ssse3;
#endif
if( !(cpu&X264_CPU_AVX) )
return;
pf[I_PRED_16x16_P] = x264_predict_16x16_p_avx;
#endif // HIGH_BIT_DEPTH
if( cpu&X264_CPU_AVX2 )
{
pf[I_PRED_16x16_P] = x264_predict_16x16_p_avx2;
pf[I_PRED_16x16_DC] = x264_predict_16x16_dc_avx2;
pf[I_PRED_16x16_DC_TOP] = x264_predict_16x16_dc_top_avx2;
pf[I_PRED_16x16_DC_LEFT] = x264_predict_16x16_dc_left_avx2;
}
}
可以看出，针对Intra16x16的Vertical帧内预测模式，x264_predict_16x16_init_mmx()会根据系统的特型初始化2个函数：如果系统仅支持MMX指令集，就会初始化x264_predict_16x16_v_mmx2()；如果系统还支持SSE指令集，就会初始化x264_predict_16x16_v_sse()。下面看一下这2个函数的代码。
x264_predict_16x16_v_mmx2()
x264_predict_16x16_v_sse()
在x264中，x264_predict_16x16_v_mmx2()和x264_predict_16x16_v_sse()这两个函数的定义是写到一起的。它们的定义位于common\x86\predict-a.asm，如下所示。
;-----------------------------------------------------------------------------
; void predict_16x16_v( pixel *src )
; Intra16x16帧内预测Vertical模式
;-----------------------------------------------------------------------------
;SIZEOF_PIXEL取值为1
;FDEC_STRIDEB为重建宏块缓存fdec_buf一行像素的大小，取值为32
;
;平台相关的信息位于x86inc.asm
;INIT_MMX中
; mmsize为8
; mova为movq
;INIT_XMM中：
; mmsize为16
; mova为movdqa
;
;STORE16的定义在前面，用于循环16行存储数据
%macro PREDICT_16x16_V 0
cglobal predict_16x16_v, 1,2
%assign %%i 0
%rep 16*SIZEOF_PIXEL/mmsize ;rep循环执行，拷贝16x16块上方的1行像素数据至m0,m1...
;mmssize为指令1次处理比特数
mova m %+ %%i, [r0-FDEC_STRIDEB+%%i*mmsize] ;移入m0,m1...
%assign %%i %%i+1
%endrep
%if 16*SIZEOF_PIXEL/mmsize == 4 ;1行需要处理4次
STORE16 m0, m1, m2, m3 ;循环存储16行，每次存储4个寄存器
%elif 16*SIZEOF_PIXEL/mmsize == 2 ;1行需要处理2次
STORE16 m0, m1 ;循环存储16行，每次存储2个寄存器
%else ;1行需要处理1次
STORE16 m0 ;循环存储16行，每次存储1个寄存器
%endif
RET
%endmacro
INIT_MMX mmx2
PREDICT_16x16_V
INIT_XMM sse
PREDICT_16x16_V
从汇编代码可以看出，x264_predict_16x16_v_mmx2()和x264_predict_16x16_v_sse()的逻辑是一模一样的。它们之间的不同主要在于一条指令处理的数据量：MMX指令的MOVA对应的是MOVQ，一次处理8Byte（8个像素）；SSE指令的MOVA对应的是MOVDQA，一次处理16Byte（16个像素，正好是16x16块中的一行像素）。
作为对比，我们可以看一下ARM平台下汇编优化过的Intra16x16的帧内预测函数。这些汇编函数的初始化函数是x264_predict_16x16_init_arm()。
x264_predict_16x16_init_arm()
x264_predict_16x16_init_arm()用于初始化ARM平台下汇编优化过的Intra16x16的帧内预测函数。该函数的定义位于common\arm\predict-c.c（“arm”文件夹下），如下所示。
void x264_predict_16x16_init_arm( int cpu, x264_predict_t pf[7] )
{
if (!(cpu&X264_CPU_NEON))
return;
#if !HIGH_BIT_DEPTH
pf[I_PRED_16x16_DC ] = x264_predict_16x16_dc_neon;
pf[I_PRED_16x16_DC_TOP] = x264_predict_16x16_dc_top_neon;
pf[I_PRED_16x16_DC_LEFT]= x264_predict_16x16_dc_left_neon;
pf[I_PRED_16x16_H ] = x264_predict_16x16_h_neon;
pf[I_PRED_16x16_V ] = x264_predict_16x16_v_neon;
pf[I_PRED_16x16_P ] = x264_predict_16x16_p_neon;
#endif // !HIGH_BIT_DEPTH
}
从源代码可以看出，针对Vertical预测模式，x264_predict_16x16_init_arm()初始化了经过NEON指令集优化的函数x264_predict_16x16_v_neon()。
x264_predict_16x16_v_neon()
x264_predict_16x16_v_neon()的定义位于common\arm\predict-a.S，如下所示。
/*
* Intra16x16帧内预测Vertical模式-NEON
*
*/
/* FDEC_STRIDE=32Bytes，为重建宏块一行像素的大小 */
/* R0存储16x16像素块地址 */
function x264_predict_16x16_v_neon
sub r0, r0, #FDEC_STRIDE /* r0=r0-FDEC_STRIDE */
mov ip, #FDEC_STRIDE /* ip=32 */
/* VLD向量加载: 内存->NEON寄存器 */
/* d0,d1为64bit双字寄存器，共16Byte，在这里存储16x16块上方一行像素 */
vld1.64 {d0-d1}, [r0,:128], ip /* 将R0指向的数据从内存加载到d0和d1寄存器（64bit） */
/* r0=r0+ip */
.rept 16 /* 循环16次，一次处理1行 */
/* VST向量存储: NEON寄存器->内存 */
vst1.64 {d0-d1}, [r0,:128], ip /* 将d0和d1寄存器中的数据传递给R0指向的内存 */
/* r0=r0+ip */
.endr
bx lr /* 子程序返回 */
endfunc
可以看出，x264_predict_16x16_v_neon()使用vld1.64指令载入16x16块上方的一行像素，然后在一个16次的循环中，使用vst1.64指令将该行像素值赋值给16x16块的每一行。
至此有关Intra16x16的Vertical帧内预测方式的源代码就分析完了。后文为了简便，都只讨论C语言版本汇编函数。
x264_predict_4x4_init()
x264_predict_4x4_init()用于初始化Intra4x4帧内预测汇编函数。该函数的定义位于common\predict.c，如下所示。
//Intra4x4帧内预测汇编函数初始化
void x264_predict_4x4_init( int cpu, x264_predict_t pf[12] )
{
//9种Intra4x4预测方式
pf[I_PRED_4x4_V] = x264_predict_4x4_v_c;
pf[I_PRED_4x4_H] = x264_predict_4x4_h_c;
pf[I_PRED_4x4_DC] = x264_predict_4x4_dc_c;
pf[I_PRED_4x4_DDL] = x264_predict_4x4_ddl_c;
pf[I_PRED_4x4_DDR] = x264_predict_4x4_ddr_c;
pf[I_PRED_4x4_VR] = x264_predict_4x4_vr_c;
pf[I_PRED_4x4_HD] = x264_predict_4x4_hd_c;
pf[I_PRED_4x4_VL] = x264_predict_4x4_vl_c;
pf[I_PRED_4x4_HU] = x264_predict_4x4_hu_c;
//这些是？
pf[I_PRED_4x4_DC_LEFT]= x264_predict_4x4_dc_left_c;
pf[I_PRED_4x4_DC_TOP] = x264_predict_4x4_dc_top_c;
pf[I_PRED_4x4_DC_128] = x264_predict_4x4_dc_128_c;
#if HAVE_MMX
x264_predict_4x4_init_mmx( cpu, pf );
#endif
#if HAVE_ARMV6
x264_predict_4x4_init_arm( cpu, pf );
#endif
#if ARCH_AARCH64
x264_predict_4x4_init_aarch64( cpu, pf );
#endif
}
从源代码可看出，x264_predict_4x4_init()首先对帧内预测函数指针数组x264_predict_t[]中的元素赋值了C语言版本的函数x264_predict_4x4_v_c()，x264_predict_4x4_h_c()，x264_predict_4x4_dc_c()，x264_predict_4x4_p_c()等一系列函数（Intra4x4有9种，后面那几种是怎么回事？）；然后会判断系统平台的特性，如果平台支持的话，会调用x264_predict_4x4_init_mmx()，x264_predict_4x4_init_arm()等给x264_predict_t[]中的元素赋值经过汇编优化的函数。作为例子，下文看一个Intra4x4的Vertical帧内预测模式的C语言函数。
相关知识简述
Intra4x4的帧内预测模式一共有9种。如下图所示。
可以看出，Intra4x4帧内预测模式中前4种和Intra16x16是一样的。后面多增加了几种预测箭头不是45度角的方式——前面的箭头位于“口”中，而后面的箭头位于“日”中。
x264_predict_4x4_v_c()
x264_predict_4x4_v_c()实现了Intra4x4的Vertical帧内预测方式。该函数的定义位于common\predict.c，如下所示。
void x264_predict_4x4_v_c( pixel *src )
{
/*
* Vertical预测方式
* |X1 X2 X3 X4
* --+-----------
* |X1 X2 X3 X4
* |X1 X2 X3 X4
* |X1 X2 X3 X4
* |X1 X2 X3 X4
*
*/
/*
* 宏展开后的结果如下所示
* 注：重建宏块缓存fdec_buf一行的数据量为32Byte
*
* (((x264_union32_t*)(&src[(0)+(0)*32]))->i) =
* (((x264_union32_t*)(&src[(0)+(1)*32]))->i) =
* (((x264_union32_t*)(&src[(0)+(2)*32]))->i) =
* (((x264_union32_t*)(&src[(0)+(3)*32]))->i) = (((x264_union32_t*)(&src[(0)+(-1)*32]))->i);
*/
PREDICT_4x4_DC(SRC_X4(0,-1));
}
x264_predict_4x4_v_c()函数的函数体极其简单，只有一个宏定义“PREDICT_4x4_DC(SRC_X4(0,-1));”。如果把该宏展开后，可以看出它取了4x4块上面一行4个像素的值，然后分别赋值给4x4块的4行像素。
x264_pixel_init()
x264_pixel_init()初始化像素值计算相关的汇编函数（包括SAD、SATD、SSD等）。该函数的定义位于common\pixel.c，如下所示。
/****************************************************************************
* x264_pixel_init:
****************************************************************************/
//SAD等和像素计算有关的函数
void x264_pixel_init( int cpu, x264_pixel_function_t *pixf )
{
memset( pixf, 0, sizeof(*pixf) );
//初始化2个函数-16x16,16x8
#define INIT2_NAME( name1, name2, cpu ) \
pixf->name1[PIXEL_16x16] = x264_pixel_##name2##_16x16##cpu;\
pixf->name1[PIXEL_16x8] = x264_pixel_##name2##_16x8##cpu;
//初始化4个函数-(16x16,16x8),8x16,8x8
#define INIT4_NAME( name1, name2, cpu ) \
INIT2_NAME( name1, name2, cpu ) \
pixf->name1[PIXEL_8x16] = x264_pixel_##name2##_8x16##cpu;\
pixf->name1[PIXEL_8x8] = x264_pixel_##name2##_8x8##cpu;
//初始化5个函数-(16x16,16x8,8x16,8x8),8x4
#define INIT5_NAME( name1, name2, cpu ) \
INIT4_NAME( name1, name2, cpu ) \
pixf->name1[PIXEL_8x4] = x264_pixel_##name2##_8x4##cpu;
//初始化6个函数-(16x16,16x8,8x16,8x8,8x4),4x8
#define INIT6_NAME( name1, name2, cpu ) \
INIT5_NAME( name1, name2, cpu ) \
pixf->name1[PIXEL_4x8] = x264_pixel_##name2##_4x8##cpu;
//初始化7个函数-(16x16,16x8,8x16,8x8,8x4,4x8),4x4
#define INIT7_NAME( name1, name2, cpu ) \
INIT6_NAME( name1, name2, cpu ) \
pixf->name1[PIXEL_4x4] = x264_pixel_##name2##_4x4##cpu;
#define INIT8_NAME( name1, name2, cpu ) \
INIT7_NAME( name1, name2, cpu ) \
pixf->name1[PIXEL_4x16] = x264_pixel_##name2##_4x16##cpu;
//重新起个名字
#define INIT2( name, cpu ) INIT2_NAME( name, name, cpu )
#define INIT4( name, cpu ) INIT4_NAME( name, name, cpu )
#define INIT5( name, cpu ) INIT5_NAME( name, name, cpu )
#define INIT6( name, cpu ) INIT6_NAME( name, name, cpu )
#define INIT7( name, cpu ) INIT7_NAME( name, name, cpu )
#define INIT8( name, cpu ) INIT8_NAME( name, name, cpu )
#define INIT_ADS( cpu ) \
pixf->ads[PIXEL_16x16] = x264_pixel_ads4##cpu;\
pixf->ads[PIXEL_16x8] = x264_pixel_ads2##cpu;\
pixf->ads[PIXEL_8x8] = x264_pixel_ads1##cpu;
//8个sad函数
INIT8( sad, );
INIT8_NAME( sad_aligned, sad, );
//7个sad函数-一次性计算3次
INIT7( sad_x3, );
//7个sad函数-一次性计算4次
INIT7( sad_x4, );
//8个ssd函数
//ssd可以用来计算PSNR
INIT8( ssd, );
//8个satd函数
//satd计算的是经过Hadamard变换后的值
INIT8( satd, );
//8个satd函数-一次性计算3次
INIT7( satd_x3, );
//8个satd函数-一次性计算4次
INIT7( satd_x4, );
INIT4( hadamard_ac, );
INIT_ADS( );
pixf->sa8d[PIXEL_16x16] = x264_pixel_sa8d_16x16;
pixf->sa8d[PIXEL_8x8] = x264_pixel_sa8d_8x8;
pixf->var[PIXEL_16x16] = x264_pixel_var_16x16;
pixf->var[PIXEL_8x16] = x264_pixel_var_8x16;
pixf->var[PIXEL_8x8] = x264_pixel_var_8x8;
pixf->var2[PIXEL_8x16] = x264_pixel_var2_8x16;
pixf->var2[PIXEL_8x8] = x264_pixel_var2_8x8;
//计算UV的
pixf->ssd_nv12_core = pixel_ssd_nv12_core;
//计算SSIM
pixf->ssim_4x4x2_core = ssim_4x4x2_core;
pixf->ssim_end4 = ssim_end4;
pixf->vsad = pixel_vsad;
pixf->asd8 = pixel_asd8;
pixf->intra_sad_x3_4x4 = x264_intra_sad_x3_4x4;
pixf->intra_satd_x3_4x4 = x264_intra_satd_x3_4x4;
pixf->intra_sad_x3_8x8 = x264_intra_sad_x3_8x8;
pixf->intra_sa8d_x3_8x8 = x264_intra_sa8d_x3_8x8;
pixf->intra_sad_x3_8x8c = x264_intra_sad_x3_8x8c;
pixf->intra_satd_x3_8x8c = x264_intra_satd_x3_8x8c;
pixf->intra_sad_x3_8x16c = x264_intra_sad_x3_8x16c;
pixf->intra_satd_x3_8x16c = x264_intra_satd_x3_8x16c;
pixf->intra_sad_x3_16x16 = x264_intra_sad_x3_16x16;
pixf->intra_satd_x3_16x16 = x264_intra_satd_x3_16x16;
//后面的初始化基本上都是汇编优化过的函数
#if HIGH_BIT_DEPTH
#if HAVE_MMX
if( cpu&X264_CPU_MMX2 )
{
INIT7( sad, _mmx2 );
INIT7_NAME( sad_aligned, sad, _mmx2 );
INIT7( sad_x3, _mmx2 );
INIT7( sad_x4, _mmx2 );
INIT8( satd, _mmx2 );
INIT7( satd_x3, _mmx2 );
INIT7( satd_x4, _mmx2 );
INIT4( hadamard_ac, _mmx2 );
INIT8( ssd, _mmx2 );
INIT_ADS( _mmx2 );
pixf->ssd_nv12_core = x264_pixel_ssd_nv12_core_mmx2;
pixf->var[PIXEL_16x16] = x264_pixel_var_16x16_mmx2;
pixf->var[PIXEL_8x8] = x264_pixel_var_8x8_mmx2;
#if ARCH_X86
pixf->var2[PIXEL_8x8] = x264_pixel_var2_8x8_mmx2;
pixf->var2[PIXEL_8x16] = x264_pixel_var2_8x16_mmx2;
#endif
pixf->intra_sad_x3_4x4 = x264_intra_sad_x3_4x4_mmx2;
pixf->intra_satd_x3_4x4 = x264_intra_satd_x3_4x4_mmx2;
pixf->intra_sad_x3_8x8 = x264_intra_sad_x3_8x8_mmx2;
pixf->intra_sad_x3_8x8c = x264_intra_sad_x3_8x8c_mmx2;
pixf->intra_satd_x3_8x8c = x264_intra_satd_x3_8x8c_mmx2;
pixf->intra_sad_x3_8x16c = x264_intra_sad_x3_8x16c_mmx2;
pixf->intra_satd_x3_8x16c = x264_intra_satd_x3_8x16c_mmx2;
pixf->intra_sad_x3_16x16 = x264_intra_sad_x3_16x16_mmx2;
pixf->intra_satd_x3_16x16 = x264_intra_satd_x3_16x16_mmx2;
}
if( cpu&X264_CPU_SSE2 )
{
INIT4_NAME( sad_aligned, sad, _sse2_aligned );
INIT5( ssd, _sse2 );
INIT6( satd, _sse2 );
pixf->satd[PIXEL_4x16] = x264_pixel_satd_4x16_sse2;
pixf->sa8d[PIXEL_16x16] = x264_pixel_sa8d_16x16_sse2;
pixf->sa8d[PIXEL_8x8] = x264_pixel_sa8d_8x8_sse2;
#if ARCH_X86_64
pixf->intra_sa8d_x3_8x8 = x264_intra_sa8d_x3_8x8_sse2;
pixf->sa8d_satd[PIXEL_16x16] = x264_pixel_sa8d_satd_16x16_sse2;
#endif
pixf->intra_sad_x3_4x4 = x264_intra_sad_x3_4x4_sse2;
pixf->ssd_nv12_core = x264_pixel_ssd_nv12_core_sse2;
pixf->ssim_4x4x2_core = x264_pixel_ssim_4x4x2_core_sse2;
pixf->ssim_end4 = x264_pixel_ssim_end4_sse2;
pixf->var[PIXEL_16x16] = x264_pixel_var_16x16_sse2;
pixf->var[PIXEL_8x8] = x264_pixel_var_8x8_sse2;
pixf->var2[PIXEL_8x8] = x264_pixel_var2_8x8_sse2;
pixf->var2[PIXEL_8x16] = x264_pixel_var2_8x16_sse2;
pixf->intra_sad_x3_8x8 = x264_intra_sad_x3_8x8_sse2;
}
//此处省略大量的X86、ARM等平台的汇编函数初始化代码
}
x264_pixel_init()的源代码非常的长，主要原因在于它把C语言版本的函数以及各种平台的汇编函数都写到一块了（不知道现在最新的版本是不是还是这样）。x264_pixel_init()包含了大量和像素计算有关的函数，包括SAD、SATD、SSD、SSIM等等。它的输入参数x264_pixel_function_t是一个结构体，其中包含了各种像素计算的函数接口。x264_pixel_function_t的定义如下所示。
typedef struct
{
x264_pixel_cmp_t sad[8];
x264_pixel_cmp_t ssd[8];
x264_pixel_cmp_t satd[8];
x264_pixel_cmp_t ssim[7];
x264_pixel_cmp_t sa8d[4];
x264_pixel_cmp_t mbcmp[8]; /* either satd or sad for subpel refine and mode decision */
x264_pixel_cmp_t mbcmp_unaligned[8]; /* unaligned mbcmp for subpel */
x264_pixel_cmp_t fpelcmp[8]; /* either satd or sad for fullpel motion search */
x264_pixel_cmp_x3_t fpelcmp_x3[7];
x264_pixel_cmp_x4_t fpelcmp_x4[7];
x264_pixel_cmp_t sad_aligned[8]; /* Aligned SAD for mbcmp */
int (*vsad)( pixel *, intptr_t, int );
int (*asd8)( pixel *pix1, intptr_t stride1, pixel *pix2, intptr_t stride2, int height );
uint64_t (*sa8d_satd[1])( pixel *pix1, intptr_t stride1, pixel *pix2, intptr_t stride2 );
uint64_t (*var[4])( pixel *pix, intptr_t stride );
int (*var2[4])( pixel *pix1, intptr_t stride1,
pixel *pix2, intptr_t stride2, int *ssd );
uint64_t (*hadamard_ac[4])( pixel *pix, intptr_t stride );
void (*ssd_nv12_core)( pixel *pixuv1, intptr_t stride1,
pixel *pixuv2, intptr_t stride2, int width, int height,
uint64_t *ssd_u, uint64_t *ssd_v );
void (*ssim_4x4x2_core)( const pixel *pix1, intptr_t stride1,
const pixel *pix2, intptr_t stride2, int sums[2][4] );
float (*ssim_end4)( int sum0[5][4], int sum1[5][4], int width );
/* multiple parallel calls to cmp. */
x264_pixel_cmp_x3_t sad_x3[7];
x264_pixel_cmp_x4_t sad_x4[7];
x264_pixel_cmp_x3_t satd_x3[7];
x264_pixel_cmp_x4_t satd_x4[7];
/* abs-diff-sum for successive elimination.
* may round width up to a multiple of 16. */
int (*ads[7])( int enc_dc[4], uint16_t *sums, int delta,
uint16_t *cost_mvx, int16_t *mvs, int width, int thresh );
/* calculate satd or sad of V, H, and DC modes. */
void (*intra_mbcmp_x3_16x16)( pixel *fenc, pixel *fdec, int res[3] );
void (*intra_satd_x3_16x16) ( pixel *fenc, pixel *fdec, int res[3] );
void (*intra_sad_x3_16x16) ( pixel *fenc, pixel *fdec, int res[3] );
void (*intra_mbcmp_x3_4x4) ( pixel *fenc, pixel *fdec, int res[3] );
void (*intra_satd_x3_4x4) ( pixel *fenc, pixel *fdec, int res[3] );
void (*intra_sad_x3_4x4) ( pixel *fenc, pixel *fdec, int res[3] );
void (*intra_mbcmp_x3_chroma)( pixel *fenc, pixel *fdec, int res[3] );
void (*intra_satd_x3_chroma) ( pixel *fenc, pixel *fdec, int res[3] );
void (*intra_sad_x3_chroma) ( pixel *fenc, pixel *fdec, int res[3] );
void (*intra_mbcmp_x3_8x16c) ( pixel *fenc, pixel *fdec, int res[3] );
void (*intra_satd_x3_8x16c) ( pixel *fenc, pixel *fdec, int res[3] );
void (*intra_sad_x3_8x16c) ( pixel *fenc, pixel *fdec, int res[3] );
void (*intra_mbcmp_x3_8x8c) ( pixel *fenc, pixel *fdec, int res[3] );
void (*intra_satd_x3_8x8c) ( pixel *fenc, pixel *fdec, int res[3] );
void (*intra_sad_x3_8x8c) ( pixel *fenc, pixel *fdec, int res[3] );
void (*intra_mbcmp_x3_8x8) ( pixel *fenc, pixel edge[36], int res[3] );
void (*intra_sa8d_x3_8x8) ( pixel *fenc, pixel edge[36], int res[3] );
void (*intra_sad_x3_8x8) ( pixel *fenc, pixel edge[36], int res[3] );
/* find minimum satd or sad of all modes, and set fdec.
* may be NULL, in which case just use pred+satd instead. */
int (*intra_mbcmp_x9_4x4)( pixel *fenc, pixel *fdec, uint16_t *bitcosts );
int (*intra_satd_x9_4x4) ( pixel *fenc, pixel *fdec, uint16_t *bitcosts );
int (*intra_sad_x9_4x4) ( pixel *fenc, pixel *fdec, uint16_t *bitcosts );
int (*intra_mbcmp_x9_8x8)( pixel *fenc, pixel *fdec, pixel edge[36], uint16_t *bitcosts, uint16_t *satds );
int (*intra_sa8d_x9_8x8) ( pixel *fenc, pixel *fdec, pixel edge[36], uint16_t *bitcosts, uint16_t *satds );
int (*intra_sad_x9_8x8) ( pixel *fenc, pixel *fdec, pixel edge[36], uint16_t *bitcosts, uint16_t *satds );
} x264_pixel_function_t;
在x264_pixel_init()中定义了好几个宏，用于给x264_pixel_function_t结构体中的函数接口赋值。例如“INIT8( sad, )”用于给x264_pixel_function_t中的sad[8]赋值。该宏展开后的代码如下。
pixf->sad[PIXEL_16x16] = x264_pixel_sad_16x16; pixf->sad[PIXEL_16x8] = x264_pixel_sad_16x8; pixf->sad[PIXEL_8x16] = x264_pixel_sad_8x16; pixf->sad[PIXEL_8x8] = x264_pixel_sad_8x8; pixf->sad[PIXEL_8x4] = x264_pixel_sad_8x4; pixf->sad[PIXEL_4x8] = x264_pixel_sad_4x8; pixf->sad[PIXEL_4x4] = x264_pixel_sad_4x4; pixf->sad[PIXEL_4x16] = x264_pixel_sad_4x16;
“INIT8( ssd, )” 用于给x264_pixel_function_t中的ssd[8]赋值。该宏展开后的代码如下。
pixf->ssd[PIXEL_16x16] = x264_pixel_ssd_16x16; pixf->ssd[PIXEL_16x8] = x264_pixel_ssd_16x8; pixf->ssd[PIXEL_8x16] = x264_pixel_ssd_8x16; pixf->ssd[PIXEL_8x8] = x264_pixel_ssd_8x8; pixf->ssd[PIXEL_8x4] = x264_pixel_ssd_8x4; pixf->ssd[PIXEL_4x8] = x264_pixel_ssd_4x8; pixf->ssd[PIXEL_4x4] = x264_pixel_ssd_4x4; pixf->ssd[PIXEL_4x16] = x264_pixel_ssd_4x16;
“INIT8( satd, )” 用于给x264_pixel_function_t中的satd[8]赋值。该宏展开后的代码如下。
pixf->satd[PIXEL_16x16] = x264_pixel_satd_16x16; pixf->satd[PIXEL_16x8] = x264_pixel_satd_16x8; pixf->satd[PIXEL_8x16] = x264_pixel_satd_8x16; pixf->satd[PIXEL_8x8] = x264_pixel_satd_8x8; pixf->satd[PIXEL_8x4] = x264_pixel_satd_8x4; pixf->satd[PIXEL_4x8] = x264_pixel_satd_4x8; pixf->satd[PIXEL_4x4] = x264_pixel_satd_4x4; pixf->satd[PIXEL_4x16] = x264_pixel_satd_4x16;
下文打算分别记录SAD、SSD和SATD计算的函数x264_pixel_sad_4x4()，x264_pixel_ssd_4x4()，和x264_pixel_satd_4x4()。此外再记录一个一次性“批量”计算4个点的函数x264_pixel_sad_x4_4x4()。
相关知识简述
简单记录几个像素计算中的概念。SAD和SATD主要用于帧内预测模式以及帧间预测模式的判断。有关SAD、SATD、SSD的定义如下：
SAD（Sum of Absolute Difference）也可以称为SAE（Sum of Absolute Error），即绝对误差和。它的计算方法就是求出两个像素块对应像素点的差值，将这些差值分别求绝对值之后再进行累加。
SATD（Sum of Absolute Transformed Difference）即Hadamard变换后再绝对值求和。它和SAD的区别在于多了一个“变换”。
SSD（Sum of Squared Difference）也可以称为SSE（Sum of Squared Error），即差值的平方和。它和SAD的区别在于多了一个“平方”。
H.264中使用SAD和SATD进行宏块预测模式的判断。早期的编码器使用SAD进行计算，近期的编码器多使用SATD进行计算。为什么使用SATD而不使用SAD呢？关键原因在于编码之后码流的大小是和图像块DCT变换后频域信息紧密相关的，而和变换前的时域信息关联性小一些。SAD只能反应时域信息；SATD却可以反映频域信息，而且计算复杂度也低于DCT变换，因此是比较合适的模式选择的依据。
使用SAD进行模式选择的示例如下所示。下面这张图代表了一个普通的Intra16x16的宏块的像素。它的下方包含了使用Vertical，Horizontal，DC和Plane四种帧内预测模式预测的像素。通过计算可以得到这几种预测像素和原始像素之间的SAD（SAE）分别为3985，5097，4991，2539。由于Plane模式的SAD取值最小，由此可以断定Plane模式对于这个宏块来说是最好的帧内预测模式。
x264_pixel_sad_4x4()
x264_pixel_sad_4x4()用于计算4x4块的SAD。该函数的定义位于common\pixel.c，如下所示。
static int x264_pixel_sad_4x4( pixel *pix1, intptr_t i_stride_pix1,
pixel *pix2, intptr_t i_stride_pix2 )
{
int i_sum = 0;
for( int y = 0; y < 4; y++ ) //4个像素
{
for( int x = 0; x < 4; x++ ) //4个像素
{
i_sum += abs( pix1[x] - pix2[x] );//相减之后求绝对值，然后累加
}
pix1 += i_stride_pix1;
pix2 += i_stride_pix2;
}
return i_sum;
}
可以看出x264_pixel_sad_4x4()将两个4x4图像块对应点相减之后，调用abs()求出绝对值，然后累加到i_sum变量上。
x264_pixel_sad_x4_4x4()
x264_pixel_sad_4x4()用于计算4个4x4块的SAD。该函数的定义位于common\pixel.c，如下所示。
static void x264_pixel_sad_x4_4x4( pixel *fenc, pixel *pix0, pixel *pix1,pixel *pix2, pixel *pix3,
intptr_t i_stride, int scores[4] )
{
scores[0] = x264_pixel_sad_4x4( fenc, 16, pix0, i_stride );
scores[1] = x264_pixel_sad_4x4( fenc, 16, pix1, i_stride );
scores[2] = x264_pixel_sad_4x4( fenc, 16, pix2, i_stride );
scores[3] = x264_pixel_sad_4x4( fenc, 16, pix3, i_stride );
}
可以看出，x264_pixel_sad_4x4()计算了起始点在pix0，pix1，pix2，pix3四个4x4的图像块和fenc之间的SAD，并将结果存储于scores[4]数组中。
x264_pixel_ssd_4x4()
x264_pixel_ssd_4x4()用于计算4x4块的SSD。该函数的定义位于common\pixel.c，如下所示。
static int x264_pixel_ssd_4x4( pixel *pix1, intptr_t i_stride_pix1,
pixel *pix2, intptr_t i_stride_pix2 )
{
int i_sum = 0;
for( int y = 0; y < 4; y++ ) //4个像素
{
for( int x = 0; x < 4; x++ ) //4个像素
{
int d = pix1[x] - pix2[x]; //相减
i_sum += d*d; //平方之后，累加
}
pix1 += i_stride_pix1;
pix2 += i_stride_pix2;
}
return i_sum;
}
可以看出x264_pixel_ssd_4x4()将两个4x4图像块对应点相减之后，取了平方值，然后累加到i_sum变量上。
x264_pixel_satd_4x4()
x264_pixel_satd_4x4()用于计算4x4块的SATD。该函数的定义位于common\pixel.c，如下所示。
//SAD（Sum of Absolute Difference）=SAE（Sum of Absolute Error)即绝对误差和
//SATD（Sum of Absolute Transformed Difference）即hadamard变换后再绝对值求和
//
//为什么帧内模式选择要用SATD？
//SAD即绝对误差和，仅反映残差时域差异，影响PSNR值，不能有效反映码流的大小。
//SATD即将残差经哈德曼变换的4x4块的预测残差绝对值总和，可以将其看作简单的时频变换，其值在一定程度上可以反映生成码流的大小。
//4x4的SATD
static NOINLINE int x264_pixel_satd_4x4( pixel *pix1, intptr_t i_pix1, pixel *pix2, intptr_t i_pix2 )
{
sum2_t tmp[4][2];
sum2_t a0, a1, a2, a3, b0, b1;
sum2_t sum = 0;
for( int i = 0; i < 4; i++, pix1 += i_pix1, pix2 += i_pix2 )
{
a0 = pix1[0] - pix2[0];
a1 = pix1[1] - pix2[1];
b0 = (a0+a1) + ((a0-a1)<<BITS_PER_SUM);
a2 = pix1[2] - pix2[2];
a3 = pix1[3] - pix2[3];
b1 = (a2+a3) + ((a2-a3)<<BITS_PER_SUM);
tmp[i][0] = b0 + b1;
tmp[i][1] = b0 - b1;
}
for( int i = 0; i < 2; i++ )
{
HADAMARD4( a0, a1, a2, a3, tmp[0][i], tmp[1][i], tmp[2][i], tmp[3][i] );
a0 = abs2(a0) + abs2(a1) + abs2(a2) + abs2(a3);
sum += ((sum_t)a0) + (a0>>BITS_PER_SUM);
}
return sum >> 1;
}
有关x264_pixel_satd_4x4()中的Hadamard变换在下面的DCT变换中再进行分析。可以看出该函数调用了一个宏HADAMARD4()用于Hadamard变换的计算，并最终将两个像素块Hadamard变换后对应元素求差的绝对值之后，累加到sum变量上。
x264_dct_init()
x264_dct_init()用于初始化DCT变换和DCT反变换相关的汇编函数。该函数的定义位于common\dct.c，如下所示。
/****************************************************************************
* x264_dct_init:
****************************************************************************/
void x264_dct_init( int cpu, x264_dct_function_t *dctf )
{
//C语言版本
//4x4DCT变换
dctf->sub4x4_dct = sub4x4_dct;
dctf->add4x4_idct = add4x4_idct;
//8x8块：分解成4个4x4DCT变换，调用4次sub4x4_dct()
dctf->sub8x8_dct = sub8x8_dct;
dctf->sub8x8_dct_dc = sub8x8_dct_dc;
dctf->add8x8_idct = add8x8_idct;
dctf->add8x8_idct_dc = add8x8_idct_dc;
dctf->sub8x16_dct_dc = sub8x16_dct_dc;
//16x16块：分解成4个8x8块，调用4次sub8x8_dct()
//实际上每个sub8x8_dct()又分解成4个4x4DCT变换，调用4次sub4x4_dct()
dctf->sub16x16_dct = sub16x16_dct;
dctf->add16x16_idct = add16x16_idct;
dctf->add16x16_idct_dc = add16x16_idct_dc;
//8x8DCT，注意：后缀是_dct8
dctf->sub8x8_dct8 = sub8x8_dct8;
dctf->add8x8_idct8 = add8x8_idct8;
dctf->sub16x16_dct8 = sub16x16_dct8;
dctf->add16x16_idct8 = add16x16_idct8;
//Hadamard变换
dctf->dct4x4dc = dct4x4dc;
dctf->idct4x4dc = idct4x4dc;
dctf->dct2x4dc = dct2x4dc;
#if HIGH_BIT_DEPTH
#if HAVE_MMX
if( cpu&X264_CPU_MMX )
{
dctf->sub4x4_dct = x264_sub4x4_dct_mmx;
dctf->sub8x8_dct = x264_sub8x8_dct_mmx;
dctf->sub16x16_dct = x264_sub16x16_dct_mmx;
}
if( cpu&X264_CPU_SSE2 )
{
dctf->add4x4_idct = x264_add4x4_idct_sse2;
dctf->dct4x4dc = x264_dct4x4dc_sse2;
dctf->idct4x4dc = x264_idct4x4dc_sse2;
dctf->sub8x8_dct8 = x264_sub8x8_dct8_sse2;
dctf->sub16x16_dct8 = x264_sub16x16_dct8_sse2;
dctf->add8x8_idct = x264_add8x8_idct_sse2;
dctf->add16x16_idct = x264_add16x16_idct_sse2;
dctf->add8x8_idct8 = x264_add8x8_idct8_sse2;
dctf->add16x16_idct8 = x264_add16x16_idct8_sse2;
dctf->sub8x8_dct_dc = x264_sub8x8_dct_dc_sse2;
dctf->add8x8_idct_dc = x264_add8x8_idct_dc_sse2;
dctf->sub8x16_dct_dc = x264_sub8x16_dct_dc_sse2;
dctf->add16x16_idct_dc= x264_add16x16_idct_dc_sse2;
}
if( cpu&X264_CPU_SSE4 )
{
dctf->sub8x8_dct8 = x264_sub8x8_dct8_sse4;
dctf->sub16x16_dct8 = x264_sub16x16_dct8_sse4;
}
if( cpu&X264_CPU_AVX )
{
dctf->add4x4_idct = x264_add4x4_idct_avx;
dctf->dct4x4dc = x264_dct4x4dc_avx;
dctf->idct4x4dc = x264_idct4x4dc_avx;
dctf->sub8x8_dct8 = x264_sub8x8_dct8_avx;
dctf->sub16x16_dct8 = x264_sub16x16_dct8_avx;
dctf->add8x8_idct = x264_add8x8_idct_avx;
dctf->add16x16_idct = x264_add16x16_idct_avx;
dctf->add8x8_idct8 = x264_add8x8_idct8_avx;
dctf->add16x16_idct8 = x264_add16x16_idct8_avx;
dctf->add8x8_idct_dc = x264_add8x8_idct_dc_avx;
dctf->sub8x16_dct_dc = x264_sub8x16_dct_dc_avx;
dctf->add16x16_idct_dc= x264_add16x16_idct_dc_avx;
}
#endif // HAVE_MMX
#else // !HIGH_BIT_DEPTH
//MMX版本
#if HAVE_MMX
if( cpu&X264_CPU_MMX )
{
dctf->sub4x4_dct = x264_sub4x4_dct_mmx;
dctf->add4x4_idct = x264_add4x4_idct_mmx;
dctf->idct4x4dc = x264_idct4x4dc_mmx;
dctf->sub8x8_dct_dc = x264_sub8x8_dct_dc_mmx2;
//此处省略大量的X86、ARM等平台的汇编函数初始化代码
}
从源代码可以看出，x264_dct_init()初始化了一系列的DCT变换的函数，这些DCT函数名称有如下规律：
（1）DCT函数名称前面有“sub”，代表对两块像素相减得到残差之后，再进行DCT变换。
（2）DCT反变换函数名称前面有“add”，代表将DCT反变换之后的残差数据叠加到预测数据上。
（3）以“dct8”为结尾的函数使用了8x8DCT，其余函数是用的都是4x4DCT。
x264_dct_init()的输入参数x264_dct_function_t是一个结构体，其中包含了各种DCT函数的接口。x264_dct_function_t的定义如下所示。
typedef struct
{
// pix1 stride = FENC_STRIDE
// pix2 stride = FDEC_STRIDE
// p_dst stride = FDEC_STRIDE
void (*sub4x4_dct) ( dctcoef dct[16], pixel *pix1, pixel *pix2 );
void (*add4x4_idct) ( pixel *p_dst, dctcoef dct[16] );
void (*sub8x8_dct) ( dctcoef dct[4][16], pixel *pix1, pixel *pix2 );
void (*sub8x8_dct_dc)( dctcoef dct[4], pixel *pix1, pixel *pix2 );
void (*add8x8_idct) ( pixel *p_dst, dctcoef dct[4][16] );
void (*add8x8_idct_dc) ( pixel *p_dst, dctcoef dct[4] );
void (*sub8x16_dct_dc)( dctcoef dct[8], pixel *pix1, pixel *pix2 );
void (*sub16x16_dct) ( dctcoef dct[16][16], pixel *pix1, pixel *pix2 );
void (*add16x16_idct)( pixel *p_dst, dctcoef dct[16][16] );
void (*add16x16_idct_dc) ( pixel *p_dst, dctcoef dct[16] );
void (*sub8x8_dct8) ( dctcoef dct[64], pixel *pix1, pixel *pix2 );
void (*add8x8_idct8) ( pixel *p_dst, dctcoef dct[64] );
void (*sub16x16_dct8) ( dctcoef dct[4][64], pixel *pix1, pixel *pix2 );
void (*add16x16_idct8)( pixel *p_dst, dctcoef dct[4][64] );
void (*dct4x4dc) ( dctcoef d[16] );
void (*idct4x4dc)( dctcoef d[16] );
void (*dct2x4dc)( dctcoef dct[8], dctcoef dct4x4[8][16] );
} x264_dct_function_t;
x264_dct_init()的工作就是对x264_dct_function_t中的函数指针进行赋值。由于DCT函数很多，不便于一一研究，下文仅举例分析几个典型的4x4DCT函数：4x4DCT变换函数sub4x4_dct()，4x4IDCT变换函数add4x4_idct()，8x8块的4x4DCT变换函数sub8x8_dct()，16x16块的4x4DCT变换函数sub16x16_dct()，4x4Hadamard变换函数dct4x4dc()。
相关知识简述
简单记录一下DCT相关的知识。DCT变换的核心理念就是把图像的低频信息（对应大面积平坦区域）变换到系数矩阵的左上角，而把高频信息变换到系数矩阵的右下角，这样就可以在压缩的时候（量化）去除掉人眼不敏感的高频信息（位于矩阵右下角的系数）从而达到压缩数据的目的。二维8x8DCT变换常见的示意图如下所示。
早期的DCT变换都使用了8x8的矩阵（变换系数为小数）。在H.264标准中新提出了一种4x4的矩阵。这种4x4 DCT变换的系数都是整数，一方面提高了运算的准确性，一方面也利于代码的优化。4x4整数DCT变换的示意图如下所示（作为对比，右侧为4x4块的Hadamard变换的示意图）。
4x4整数DCT变换的公式如下所示。
对该公式中的矩阵乘法可以转换为2次一维DCT变换：首先对4x4块中的每行像素进行一维DCT变换，然后再对4x4块中的每列像素进行一维DCT变换。而一维的DCT变换是可以改造成为蝶形快速算法的，如下所示。
同理，DCT反变换就是DCT变换的逆变换。DCT反变换的公式如下所示。
同理，DCT反变换的矩阵乘法也可以改造成为2次一维IDCT变换：首先对4x4块中的每行像素进行一维IDCT变换，然后再对4x4块中的每列像素进行一维IDCT变换。而一维的IDCT变换也可以改造成为蝶形快速算法，如下所示。
除了4x4DCT变换之外，新版本的H.264标准中还引入了一种8x8DCT。目前针对这种8x8DCT我还没有做研究，暂时不做记录。
sub4x4_dct()
sub4x4_dct()可以将两块4x4的图像相减求残差后，进行DCT变换。该函数的定义位于common\dct.c，如下所示。
/*
* 求残差用
* 注意求的是一个“方块”形像素
*
* 参数的含义如下：
* diff：输出的残差数据
* i_size：方块的大小
* pix1：输入数据1
* i_pix1：输入数据1一行像素大小（stride）
* pix2：输入数据2
* i_pix2：输入数据2一行像素大小（stride）
*
*/
static inline void pixel_sub_wxh( dctcoef *diff, int i_size,
pixel *pix1, int i_pix1, pixel *pix2, int i_pix2 )
{
for( int y = 0; y < i_size; y++ )
{
for( int x = 0; x < i_size; x++ )
diff[x + y*i_size] = pix1[x] - pix2[x];//求残差
pix1 += i_pix1;//前进到下一行
pix2 += i_pix2;
}
}
//4x4DCT变换
//注意首先获取pix1和pix2两块数据的残差，然后再进行变换
//返回dct[16]
static void sub4x4_dct( dctcoef dct[16], pixel *pix1, pixel *pix2 )
{
dctcoef d[16];
dctcoef tmp[16];
//获取残差数据，存入d[16]
//pix1一般为编码帧（enc）
//pix2一般为重建帧（dec）
pixel_sub_wxh( d, 4, pix1, FENC_STRIDE, pix2, FDEC_STRIDE );
//处理残差d[16]
//蝶形算法：横向4个像素
for( int i = 0; i < 4; i++ )
{
int s03 = d[i*4+0] + d[i*4+3];
int s12 = d[i*4+1] + d[i*4+2];
int d03 = d[i*4+0] - d[i*4+3];
int d12 = d[i*4+1] - d[i*4+2];
tmp[0*4+i] = s03 + s12;
tmp[1*4+i] = 2*d03 + d12;
tmp[2*4+i] = s03 - s12;
tmp[3*4+i] = d03 - 2*d12;
}
//蝶形算法：纵向
for( int i = 0; i < 4; i++ )
{
int s03 = tmp[i*4+0] + tmp[i*4+3];
int s12 = tmp[i*4+1] + tmp[i*4+2];
int d03 = tmp[i*4+0] - tmp[i*4+3];
int d12 = tmp[i*4+1] - tmp[i*4+2];
dct[i*4+0] = s03 + s12;
dct[i*4+1] = 2*d03 + d12;
dct[i*4+2] = s03 - s12;
dct[i*4+3] = d03 - 2*d12;
}
}
从源代码可以看出，sub4x4_dct()首先调用pixel_sub_wxh()求出两个输入图像块的残差，然后使用蝶形快速算法计算残差图像的DCT系数。
add4x4_idct()
add4x4_idct()可以将残差数据进行DCT反变换，并将变换后得到的残差像素数据叠加到预测数据上。该函数的定义位于common\dct.c，如下所示。
//4x4DCT反变换（“add”代表叠加到已有的像素上）
static void add4x4_idct( pixel *p_dst, dctcoef dct[16] )
{
dctcoef d[16];
dctcoef tmp[16];
for( int i = 0; i < 4; i++ )
{
int s02 = dct[0*4+i] + dct[2*4+i];
int d02 = dct[0*4+i] - dct[2*4+i];
int s13 = dct[1*4+i] + (dct[3*4+i]>>1);
int d13 = (dct[1*4+i]>>1) - dct[3*4+i];
tmp[i*4+0] = s02 + s13;
tmp[i*4+1] = d02 + d13;
tmp[i*4+2] = d02 - d13;
tmp[i*4+3] = s02 - s13;
}
for( int i = 0; i < 4; i++ )
{
int s02 = tmp[0*4+i] + tmp[2*4+i];
int d02 = tmp[0*4+i] - tmp[2*4+i];
int s13 = tmp[1*4+i] + (tmp[3*4+i]>>1);
int d13 = (tmp[1*4+i]>>1) - tmp[3*4+i];
d[0*4+i] = ( s02 + s13 + 32 ) >> 6;
d[1*4+i] = ( d02 + d13 + 32 ) >> 6;
d[2*4+i] = ( d02 - d13 + 32 ) >> 6;
d[3*4+i] = ( s02 - s13 + 32 ) >> 6;
}
for( int y = 0; y < 4; y++ )
{
for( int x = 0; x < 4; x++ )
p_dst[x] = x264_clip_pixel( p_dst[x] + d[y*4+x] );
p_dst += FDEC_STRIDE;
}
}
从源代码可以看出，add4x4_idct()首先采用快速蝶形算法对DCT系数进行DCT反变换后得到残差像素数据，然后再将残差数据叠加到p_dst指向的像素上。需要注意这里是“叠加”而不是“赋值”。
sub8x8_dct()
sub8x8_dct()可以将两块8x8的图像相减求残差后，进行4x4DCT变换。该函数的定义位于common\dct.c，如下所示。
//8x8块：分解成4个4x4DCT变换，调用4次sub4x4_dct()
//返回dct[4][16]
static void sub8x8_dct( dctcoef dct[4][16], pixel *pix1, pixel *pix2 )
{
/*
* 8x8 宏块被划分为4个4x4子块
*
* +---+---+
* | 0 | 1 |
* +---+---+
* | 2 | 3 |
* +---+---+
*
*/
sub4x4_dct( dct[0], &pix1[0], &pix2[0] );
sub4x4_dct( dct[1], &pix1[4], &pix2[4] );
sub4x4_dct( dct[2], &pix1[4*FENC_STRIDE+0], &pix2[4*FDEC_STRIDE+0] );
sub4x4_dct( dct[3], &pix1[4*FENC_STRIDE+4], &pix2[4*FDEC_STRIDE+4] );
}
从源代码可以看出， sub8x8_dct()将8x8的图像块分成4个4x4的图像块，分别调用了sub4x4_dct()。
sub16x16_dct()
sub16x16_dct()可以将两块16x16的图像相减求残差后，进行4x4DCT变换。该函数的定义位于common\dct.c，如下所示。
//16x16块：分解成4个8x8的块做DCT变换，调用4次sub8x8_dct()
//返回dct[16][16]
static void sub16x16_dct( dctcoef dct[16][16], pixel *pix1, pixel *pix2 )
{
/*
* 16x16 宏块被划分为4个8x8子块
*
* +--------+--------+
* | | |
* | 0 | 1 |
* | | |
* +--------+--------+
* | | |
* | 2 | 3 |
* | | |
* +--------+--------+
*
*/
sub8x8_dct( &dct[ 0], &pix1[0], &pix2[0] ); //0
sub8x8_dct( &dct[ 4], &pix1[8], &pix2[8] ); //1
sub8x8_dct( &dct[ 8], &pix1[8*FENC_STRIDE+0], &pix2[8*FDEC_STRIDE+0] ); //2
sub8x8_dct( &dct[12], &pix1[8*FENC_STRIDE+8], &pix2[8*FDEC_STRIDE+8] ); //3
}
从源代码可以看出， sub8x8_dct()将16x16的图像块分成4个8x8的图像块，分别调用了sub8x8_dct()。而sub8x8_dct()实际上又调用了4次sub4x4_dct()。所以可以得知，不论sub16x16_dct()，sub8x8_dct()还是sub4x4_dct()，本质都是进行4x4DCT。
dct4x4dc()
dct4x4dc()可以将输入的4x4图像块进行Hadamard变换。该函数的定义位于common\dct.c，如下所示。
//Hadamard变换
static void dct4x4dc( dctcoef d[16] )
{
dctcoef tmp[16];
//蝶形算法：横向的4个像素
for( int i = 0; i < 4; i++ )
{
int s01 = d[i*4+0] + d[i*4+1];
int d01 = d[i*4+0] - d[i*4+1];
int s23 = d[i*4+2] + d[i*4+3];
int d23 = d[i*4+2] - d[i*4+3];
tmp[0*4+i] = s01 + s23;
tmp[1*4+i] = s01 - s23;
tmp[2*4+i] = d01 - d23;
tmp[3*4+i] = d01 + d23;
}
//蝶形算法：纵向
for( int i = 0; i < 4; i++ )
{
int s01 = tmp[i*4+0] + tmp[i*4+1];
int d01 = tmp[i*4+0] - tmp[i*4+1];
int s23 = tmp[i*4+2] + tmp[i*4+3];
int d23 = tmp[i*4+2] - tmp[i*4+3];
d[i*4+0] = ( s01 + s23 + 1 ) >> 1;
d[i*4+1] = ( s01 - s23 + 1 ) >> 1;
d[i*4+2] = ( d01 - d23 + 1 ) >> 1;
d[i*4+3] = ( d01 + d23 + 1 ) >> 1;
}
}
从源代码可以看出，dct4x4dc()实现了Hadamard快速蝶形算法。
x264_mc_init()
x264_mc_init()用于初始化运动补偿相关的汇编函数。该函数的定义位于common\mc.c，如下所示。
//运动补偿
void x264_mc_init( int cpu, x264_mc_functions_t *pf, int cpu_independent )
{
//亮度运动补偿
pf->mc_luma = mc_luma;
//获得匹配块
pf->get_ref = get_ref;
pf->mc_chroma = mc_chroma;
//求平均
pf->avg[PIXEL_16x16]= pixel_avg_16x16;
pf->avg[PIXEL_16x8] = pixel_avg_16x8;
pf->avg[PIXEL_8x16] = pixel_avg_8x16;
pf->avg[PIXEL_8x8] = pixel_avg_8x8;
pf->avg[PIXEL_8x4] = pixel_avg_8x4;
pf->avg[PIXEL_4x16] = pixel_avg_4x16;
pf->avg[PIXEL_4x8] = pixel_avg_4x8;
pf->avg[PIXEL_4x4] = pixel_avg_4x4;
pf->avg[PIXEL_4x2] = pixel_avg_4x2;
pf->avg[PIXEL_2x8] = pixel_avg_2x8;
pf->avg[PIXEL_2x4] = pixel_avg_2x4;
pf->avg[PIXEL_2x2] = pixel_avg_2x2;
//加权相关
pf->weight = x264_mc_weight_wtab;
pf->offsetadd = x264_mc_weight_wtab;
pf->offsetsub = x264_mc_weight_wtab;
pf->weight_cache = x264_weight_cache;
//赋值-只包含了方形的
pf->copy_16x16_unaligned = mc_copy_w16;
pf->copy[PIXEL_16x16] = mc_copy_w16;
pf->copy[PIXEL_8x8] = mc_copy_w8;
pf->copy[PIXEL_4x4] = mc_copy_w4;
pf->store_interleave_chroma = store_interleave_chroma;
pf->load_deinterleave_chroma_fenc = load_deinterleave_chroma_fenc;
pf->load_deinterleave_chroma_fdec = load_deinterleave_chroma_fdec;
//拷贝像素-不论像素块大小
pf->plane_copy = x264_plane_copy_c;
pf->plane_copy_interleave = x264_plane_copy_interleave_c;
pf->plane_copy_deinterleave = x264_plane_copy_deinterleave_c;
pf->plane_copy_deinterleave_rgb = x264_plane_copy_deinterleave_rgb_c;
pf->plane_copy_deinterleave_v210 = x264_plane_copy_deinterleave_v210_c;
//关键：半像素内插
pf->hpel_filter = hpel_filter;
//几个空函数
pf->prefetch_fenc_420 = prefetch_fenc_null;
pf->prefetch_fenc_422 = prefetch_fenc_null;
pf->prefetch_ref = prefetch_ref_null;
pf->memcpy_aligned = memcpy;
pf->memzero_aligned = memzero_aligned;
//降低分辨率-线性内插（不是半像素内插）
pf->frame_init_lowres_core = frame_init_lowres_core;
pf->integral_init4h = integral_init4h;
pf->integral_init8h = integral_init8h;
pf->integral_init4v = integral_init4v;
pf->integral_init8v = integral_init8v;
pf->mbtree_propagate_cost = mbtree_propagate_cost;
pf->mbtree_propagate_list = mbtree_propagate_list;
//各种汇编版本
#if HAVE_MMX
x264_mc_init_mmx( cpu, pf );
#endif
#if HAVE_ALTIVEC
if( cpu&X264_CPU_ALTIVEC )
x264_mc_altivec_init( pf );
#endif
#if HAVE_ARMV6
x264_mc_init_arm( cpu, pf );
#endif
#if ARCH_AARCH64
x264_mc_init_aarch64( cpu, pf );
#endif
if( cpu_independent )
{
pf->mbtree_propagate_cost = mbtree_propagate_cost;
pf->mbtree_propagate_list = mbtree_propagate_list;
}
}
从源代码可以看出，x264_mc_init()中包含了大量的像素内插、拷贝、求平均的函数。这些函数都是用于在H.264编码过程中进行运动估计和运动补偿的。x264_mc_init()的参数x264_mc_functions_t是一个结构体，其中包含了运动补偿函数相关的函数接口。x264_mc_functions_t的定义如下。
typedef struct
{
void (*mc_luma)( pixel *dst, intptr_t i_dst, pixel **src, intptr_t i_src,
int mvx, int mvy, int i_width, int i_height, const x264_weight_t *weight );
/* may round up the dimensions if they're not a power of 2 */
pixel* (*get_ref)( pixel *dst, intptr_t *i_dst, pixel **src, intptr_t i_src,
int mvx, int mvy, int i_width, int i_height, const x264_weight_t *weight );
/* mc_chroma may write up to 2 bytes of garbage to the right of dst,
* so it must be run from left to right. */
void (*mc_chroma)( pixel *dstu, pixel *dstv, intptr_t i_dst, pixel *src, intptr_t i_src,
int mvx, int mvy, int i_width, int i_height );
void (*avg[12])( pixel *dst, intptr_t dst_stride, pixel *src1, intptr_t src1_stride,
pixel *src2, intptr_t src2_stride, int i_weight );
/* only 16x16, 8x8, and 4x4 defined */
void (*copy[7])( pixel *dst, intptr_t dst_stride, pixel *src, intptr_t src_stride, int i_height );
void (*copy_16x16_unaligned)( pixel *dst, intptr_t dst_stride, pixel *src, intptr_t src_stride, int i_height );
void (*store_interleave_chroma)( pixel *dst, intptr_t i_dst, pixel *srcu, pixel *srcv, int height );
void (*load_deinterleave_chroma_fenc)( pixel *dst, pixel *src, intptr_t i_src, int height );
void (*load_deinterleave_chroma_fdec)( pixel *dst, pixel *src, intptr_t i_src, int height );
void (*plane_copy)( pixel *dst, intptr_t i_dst, pixel *src, intptr_t i_src, int w, int h );
void (*plane_copy_interleave)( pixel *dst, intptr_t i_dst, pixel *srcu, intptr_t i_srcu,
pixel *srcv, intptr_t i_srcv, int w, int h );
/* may write up to 15 pixels off the end of each plane */
void (*plane_copy_deinterleave)( pixel *dstu, intptr_t i_dstu, pixel *dstv, intptr_t i_dstv,
pixel *src, intptr_t i_src, int w, int h );
void (*plane_copy_deinterleave_rgb)( pixel *dsta, intptr_t i_dsta, pixel *dstb, intptr_t i_dstb,
pixel *dstc, intptr_t i_dstc, pixel *src, intptr_t i_src, int pw, int w, int h );
void (*plane_copy_deinterleave_v210)( pixel *dsty, intptr_t i_dsty,
pixel *dstc, intptr_t i_dstc,
uint32_t *src, intptr_t i_src, int w, int h );
void (*hpel_filter)( pixel *dsth, pixel *dstv, pixel *dstc, pixel *src,
intptr_t i_stride, int i_width, int i_height, int16_t *buf );
/* prefetch the next few macroblocks of fenc or fdec */
void (*prefetch_fenc) ( pixel *pix_y, intptr_t stride_y, pixel *pix_uv, intptr_t stride_uv, int mb_x );
void (*prefetch_fenc_420)( pixel *pix_y, intptr_t stride_y, pixel *pix_uv, intptr_t stride_uv, int mb_x );
void (*prefetch_fenc_422)( pixel *pix_y, intptr_t stride_y, pixel *pix_uv, intptr_t stride_uv, int mb_x );
/* prefetch the next few macroblocks of a hpel reference frame */
void (*prefetch_ref)( pixel *pix, intptr_t stride, int parity );
void *(*memcpy_aligned)( void *dst, const void *src, size_t n );
void (*memzero_aligned)( void *dst, size_t n );
/* successive elimination prefilter */
void (*integral_init4h)( uint16_t *sum, pixel *pix, intptr_t stride );
void (*integral_init8h)( uint16_t *sum, pixel *pix, intptr_t stride );
void (*integral_init4v)( uint16_t *sum8, uint16_t *sum4, intptr_t stride );
void (*integral_init8v)( uint16_t *sum8, intptr_t stride );
void (*frame_init_lowres_core)( pixel *src0, pixel *dst0, pixel *dsth, pixel *dstv, pixel *dstc,
intptr_t src_stride, intptr_t dst_stride, int width, int height );
weight_fn_t *weight;
weight_fn_t *offsetadd;
weight_fn_t *offsetsub;
void (*weight_cache)( x264_t *, x264_weight_t * );
void (*mbtree_propagate_cost)( int16_t *dst, uint16_t *propagate_in, uint16_t *intra_costs,
uint16_t *inter_costs, uint16_t *inv_qscales, float *fps_factor, int len );
void (*mbtree_propagate_list)( x264_t *h, uint16_t *ref_costs, int16_t (*mvs)[2],
int16_t *propagate_amount, uint16_t *lowres_costs,
int bipred_weight, int mb_y, int len, int list );
} x264_mc_functions_t;
x264_mc_init()的工作就是对x264_mc_functions_t中的函数指针进行赋值。由于运动估计和运动补偿在x264中属于相对复杂的环节，其中许多函数的作用很难三言两语表述出来，因此只举一个相对简单的例子——半像素内插函数hpel_filter()。
相关知识简述
简单记录一下半像素插值的知识。《H.264标准》中规定，运动估计为1/4像素精度。因此在H.264编码和解码的过程中，需要将画面中的像素进行插值——简单地说就是把原先的1个像素点拓展成4x4一共16个点。下图显示了H.264编码和解码过程中像素插值情况。可以看出原先的G点的右下方通过插值的方式产生了a、b、c、d等一共16个点。
如图所示，1/4像素内插一般分成两步：
（1）半像素内插。这一步通过6抽头滤波器获得5个半像素点。
（2）线性内插。这一步通过简单的线性内插获得剩余的1/4像素点。
图中半像素内插点为b、m、h、s、j五个点。半像素内插方法是对整像素点进行6 抽头滤波得出，滤波器的权重为(1/32, -5/32, 5/8, 5/8, -5/32, 1/32)。例如b的计算公式为：
b=round( (E - 5F + 20G + 20H - 5I + J ) / 32)
剩下几个半像素点的计算关系如下：
m：由B、D、H、N、S、U计算
h：由A、C、G、M、R、T计算
s：由K、L、M、N、P、Q计算
j：由cc、dd、h、m、ee、ff计算。需要注意j点的运算量比较大，因为cc、dd、ee、ff都需要通过半像素内插方法进行计算。
在获得半像素点之后，就可以通过简单的线性内插获得1/4像素内插点了。1/4像素内插的方式如下图所示。例如图中a点的计算公式如下：
A=round( (G+b)/2 )
在这里有一点需要注意：位于4个角的e、g、p、r四个点并不是通过j点计算计算的，而是通过b、h、s、m四个半像素点计算的。
hpel_filter()
hpel_filter()用于进行半像素插值。该函数的定义位于common\mc.c，如下所示。
//半像素插值公式
//b= (E - 5F + 20G + 20H - 5I + J)/32
// x
//d取1，水平滤波器；d取stride，垂直滤波器（这里没有除以32）
#define TAPFILTER(pix, d) ((pix)[x-2*d] + (pix)[x+3*d] - 5*((pix)[x-d] + (pix)[x+2*d]) + 20*((pix)[x] + (pix)[x+d]))
/*
* 半像素插值
* dsth：水平滤波得到的半像素点(aa,bb,b,s,gg,hh)
* dstv：垂直滤波的到的半像素点(cc,dd,h,m,ee,ff)
* dstc：“水平+垂直”滤波得到的位于4个像素中间的半像素点（j）
*
* 半像素插值示意图如下：
*
* A aa B
*
* C bb D
*
* E F G b H I J
*
* cc dd h j m ee ff
*
* K L M s N P Q
*
* R gg S
*
* T hh U
*
* 计算公式如下：
* b=round( (E - 5F + 20G + 20H - 5I + J ) / 32)
*
* 剩下几个半像素点的计算关系如下：
* m：由B、D、H、N、S、U计算
* h：由A、C、G、M、R、T计算
* s：由K、L、M、N、P、Q计算
* j：由cc、dd、h、m、ee、ff计算。需要注意j点的运算量比较大，因为cc、dd、ee、ff都需要通过半像素内插方法进行计算。
*
*/
static void hpel_filter( pixel *dsth, pixel *dstv, pixel *dstc, pixel *src,
intptr_t stride, int width, int height, int16_t *buf )
{
const int pad = (BIT_DEPTH > 9) ? (-10 * PIXEL_MAX) : 0;
/*
* 几种半像素点之间的位置关系
*
* X： 像素点
* H：水平滤波半像素点
* V：垂直滤波半像素点
* C： 中间位置半像素点
*
* X H X X X
*
* V C
*
* X X X X
*
*
*
* X X X X
*
*/
//一行一行处理
for( int y = 0; y < height; y++ )
{
//一个一个点处理
//每个整像素点都对应h，v，c三个半像素点
//v
for( int x = -2; x < width+3; x++ )//(aa,bb,b,s,gg,hh),结果存入buf
{
//垂直滤波半像素点
int v = TAPFILTER(src,stride);
dstv[x] = x264_clip_pixel( (v + 16) >> 5 );
/* transform v for storage in a 16-bit integer */
//这应该是给dstc计算使用的？
buf[x+2] = v + pad;
}
//c
for( int x = 0; x < width; x++ )
dstc[x] = x264_clip_pixel( (TAPFILTER(buf+2,1) - 32*pad + 512) >> 10 );//四个相邻像素中间的半像素点
//h
for( int x = 0; x < width; x++ )
dsth[x] = x264_clip_pixel( (TAPFILTER(src,1) + 16) >> 5 );//水平滤波半像素点
dsth += stride;
dstv += stride;
dstc += stride;
src += stride;
}
}
从源代码可以看出，hpel_filter()中包含了一个宏TAPFILTER()用来完成半像素点像素值的计算。在完成半像素插值工作后，dsth中存储的是经过水平插值后的半像素点，dstv中存储的是经过垂直插值后的半像素点，dstc中存储的是位于4个相邻像素点中间位置的半像素点。这三块内存中的点的位置关系如下图所示（灰色的点是整像素点）。
x264_quant_init()
x264_quant_init()初始化量化和反量化相关的汇编函数。该函数的定义位于common\quant.c，如下所示。
//量化
void x264_quant_init( x264_t *h, int cpu, x264_quant_function_t *pf )
{
//这个好像是针对8x8DCT的
pf->quant_8x8 = quant_8x8;
//量化4x4=16个
pf->quant_4x4 = quant_4x4;
//注意：处理4个4x4的块
pf->quant_4x4x4 = quant_4x4x4;
//Intra16x16中，16个DC系数Hadamard变换后对的它们量化
pf->quant_4x4_dc = quant_4x4_dc;
pf->quant_2x2_dc = quant_2x2_dc;
//反量化4x4=16个
pf->dequant_4x4 = dequant_4x4;
pf->dequant_4x4_dc = dequant_4x4_dc;
pf->dequant_8x8 = dequant_8x8;
pf->idct_dequant_2x4_dc = idct_dequant_2x4_dc;
pf->idct_dequant_2x4_dconly = idct_dequant_2x4_dconly;
pf->optimize_chroma_2x2_dc = optimize_chroma_2x2_dc;
pf->optimize_chroma_2x4_dc = optimize_chroma_2x4_dc;
pf->denoise_dct = x264_denoise_dct;
pf->decimate_score15 = x264_decimate_score15;
pf->decimate_score16 = x264_decimate_score16;
pf->decimate_score64 = x264_decimate_score64;
pf->coeff_last4 = x264_coeff_last4;
pf->coeff_last8 = x264_coeff_last8;
pf->coeff_last[ DCT_LUMA_AC] = x264_coeff_last15;
pf->coeff_last[ DCT_LUMA_4x4] = x264_coeff_last16;
pf->coeff_last[ DCT_LUMA_8x8] = x264_coeff_last64;
pf->coeff_level_run4 = x264_coeff_level_run4;
pf->coeff_level_run8 = x264_coeff_level_run8;
pf->coeff_level_run[ DCT_LUMA_AC] = x264_coeff_level_run15;
pf->coeff_level_run[ DCT_LUMA_4x4] = x264_coeff_level_run16;
#if HIGH_BIT_DEPTH
#if HAVE_MMX
INIT_TRELLIS( sse2 );
if( cpu&X264_CPU_MMX2 )
{
#if ARCH_X86
pf->denoise_dct = x264_denoise_dct_mmx;
pf->decimate_score15 = x264_decimate_score15_mmx2;
pf->decimate_score16 = x264_decimate_score16_mmx2;
pf->decimate_score64 = x264_decimate_score64_mmx2;
pf->coeff_last8 = x264_coeff_last8_mmx2;
pf->coeff_last[ DCT_LUMA_AC] = x264_coeff_last15_mmx2;
pf->coeff_last[ DCT_LUMA_4x4] = x264_coeff_last16_mmx2;
pf->coeff_last[ DCT_LUMA_8x8] = x264_coeff_last64_mmx2;
pf->coeff_level_run8 = x264_coeff_level_run8_mmx2;
pf->coeff_level_run[ DCT_LUMA_AC] = x264_coeff_level_run15_mmx2;
pf->coeff_level_run[ DCT_LUMA_4x4] = x264_coeff_level_run16_mmx2;
#endif
pf->coeff_last4 = x264_coeff_last4_mmx2;
pf->coeff_level_run4 = x264_coeff_level_run4_mmx2;
if( cpu&X264_CPU_LZCNT )
pf->coeff_level_run4 = x264_coeff_level_run4_mmx2_lzcnt;
}
//此处省略大量的X86、ARM等平台的汇编函数初始化代码
}
从源代码可以看出，x264_quant_init ()初始化了一系列的量化相关的函数。它的输入参数x264_quant_function_t是一个结构体，其中包含了和量化相关各种函数指针。x264_quant_function_t的定义如下所示。
typedef struct
{
int (*quant_8x8) ( dctcoef dct[64], udctcoef mf[64], udctcoef bias[64] );
int (*quant_4x4) ( dctcoef dct[16], udctcoef mf[16], udctcoef bias[16] );
int (*quant_4x4x4)( dctcoef dct[4][16], udctcoef mf[16], udctcoef bias[16] );
int (*quant_4x4_dc)( dctcoef dct[16], int mf, int bias );
int (*quant_2x2_dc)( dctcoef dct[4], int mf, int bias );
void (*dequant_8x8)( dctcoef dct[64], int dequant_mf[6][64], int i_qp );
void (*dequant_4x4)( dctcoef dct[16], int dequant_mf[6][16], int i_qp );
void (*dequant_4x4_dc)( dctcoef dct[16], int dequant_mf[6][16], int i_qp );
void (*idct_dequant_2x4_dc)( dctcoef dct[8], dctcoef dct4x4[8][16], int dequant_mf[6][16], int i_qp );
void (*idct_dequant_2x4_dconly)( dctcoef dct[8], int dequant_mf[6][16], int i_qp );
int (*optimize_chroma_2x2_dc)( dctcoef dct[4], int dequant_mf );
int (*optimize_chroma_2x4_dc)( dctcoef dct[8], int dequant_mf );
void (*denoise_dct)( dctcoef *dct, uint32_t *sum, udctcoef *offset, int size );
int (*decimate_score15)( dctcoef *dct );
int (*decimate_score16)( dctcoef *dct );
int (*decimate_score64)( dctcoef *dct );
int (*coeff_last[14])( dctcoef *dct );
int (*coeff_last4)( dctcoef *dct );
int (*coeff_last8)( dctcoef *dct );
int (*coeff_level_run[13])( dctcoef *dct, x264_run_level_t *runlevel );
int (*coeff_level_run4)( dctcoef *dct, x264_run_level_t *runlevel );
int (*coeff_level_run8)( dctcoef *dct, x264_run_level_t *runlevel );
#define TRELLIS_PARAMS const int *unquant_mf, const uint8_t *zigzag, int lambda2,\
int last_nnz, dctcoef *coefs, dctcoef *quant_coefs, dctcoef *dct,\
uint8_t *cabac_state_sig, uint8_t *cabac_state_last,\
uint64_t level_state0, uint16_t level_state1
int (*trellis_cabac_4x4)( TRELLIS_PARAMS, int b_ac );
int (*trellis_cabac_8x8)( TRELLIS_PARAMS, int b_interlaced );
int (*trellis_cabac_4x4_psy)( TRELLIS_PARAMS, int b_ac, dctcoef *fenc_dct, int psy_trellis );
int (*trellis_cabac_8x8_psy)( TRELLIS_PARAMS, int b_interlaced, dctcoef *fenc_dct, int psy_trellis );
int (*trellis_cabac_dc)( TRELLIS_PARAMS, int num_coefs );
int (*trellis_cabac_chroma_422_dc)( TRELLIS_PARAMS );
} x264_quant_function_t;
x264_quant_init ()的工作就是对x264_quant_function_t中的函数指针进行赋值。下文举例分析其中2个函数：4x4矩阵量化函数quant_4x4()，4个4x4矩阵量化函数quant_4x4x4()。
相关知识简述
简单记录一下量化的概念。量化是H.264视频压缩编码中对视频质量影响最大的地方，也是会导致“信息丢失”的地方。量化的原理可以表示为下面公式：
FQ=round(y/Qstep)
其中，y 为输入样本点编码，Qstep为量化步长，FQ 为y 的量化值，round()为取整函数（其输出为与输入实数最近的整数）。其相反过程，即反量化为：
y’＝FQ*Qstep
如果Qstep较大，则量化值FQ取值较小，其相应的编码长度较小，但是但反量化时损失较多的图像细节信息。简而言之，Qstep越大，视频压缩编码后体积越小，视频质量越差。
在H.264 中，量化步长Qstep 共有52 个值，如下表所示。其中QP 是量化参数，是量化步长的序号。当QP 取最小值0 时代表最精细的量化，当QP 取最大值51 时代表最粗糙的量化。QP 每增加6，Qstep 增加一倍。
《H.264标准》中规定，量化过程除了完成本职工作外，还需要完成它前一步DCT变换中“系数相乘”的工作。这一步骤的推导过程不再记录，直接给出最终的公式（这个公式完全为整数运算，同时避免了除法的使用）：
|Zij| = (|Wij|*MF + f)>>qbits
sign(Zij) = sign (Wij)
其中：
sign()为符号函数。
Wij为DCT变换后的系数。
MF的值如下表所示。表中只列出对应QP 值为0 到5 的MF 值。QP大于6之后，将QP实行对6取余数操作，再找到MF的值。
qbits计算公式为“qbits = 15 + floor(QP/6)”。即它的值随QP 值每增加6 而增加1。
f 是偏移量（用于改善恢复图像的视觉效果）。对帧内预测图像块取2^qbits/3，对帧间预测图像块取2^qbits/6。
为了更形象的显示MF的取值，做了下面一张示意图。图中深蓝色代表MF取值较大的点，而浅蓝色代表MF取值较小的点。
quant_4x4()
quant_4x4()用于对4x4的DCT残差矩阵进行量化。该函数的定义位于common\quant.c，如下所示。
//4x4量化
//输入输出都是dct[16]
static int quant_4x4( dctcoef dct[16], udctcoef mf[16], udctcoef bias[16] )
{
int nz = 0;
//循环16个元素
for( int i = 0; i < 16; i++ )
QUANT_ONE( dct[i], mf[i], bias[i] );
return !!nz;
}
可以看出quant_4x4()循环16次调用了QUANT_ONE()完成了量化工作。并且将DCT系数值，MF值，bias偏移值直接传递给了该宏。
QUANT_ONE()
QUANT_ONE()完成了一个DCT系数的量化工作，它的定义如下。
//量化1个元素
#define QUANT_ONE( coef, mf, f ) \
{ \
if( (coef) > 0 ) \
(coef) = (f + (coef)) * (mf) >> 16; \
else \
(coef) = - ((f - (coef)) * (mf) >> 16); \
nz |= (coef); \
}
从QUANT_ONE()的定义可以看出，它实现了上文提到的H.264标准中的量化公式。
quant_4x4x4()
quant_4x4x4()用于对4个4x4的DCT残差矩阵进行量化。该函数的定义位于common\quant.c，如下所示。
//处理4个4x4量化
//输入输出都是dct[4][16]
static int quant_4x4x4( dctcoef dct[4][16], udctcoef mf[16], udctcoef bias[16] )
{
int nza = 0;
//处理4个
for( int j = 0; j < 4; j++ )
{
int nz = 0;
//量化
for( int i = 0; i < 16; i++ )
QUANT_ONE( dct[j][i], mf[i], bias[i] );
nza |= (!!nz)<<j;
}
return nza;
}
从quant_4x4x4()的定义可以看出，该函数相当于调用了4次quant_4x4()函数。
x264_deblock_init()
x264_deblock_init()用于初始化去块效应滤波器相关的汇编函数。该函数的定义位于common\deblock.c，如下所示。
//去块效应滤波
void x264_deblock_init( int cpu, x264_deblock_function_t *pf, int b_mbaff )
{
//注意：标记“v”的垂直滤波器是处理水平边界用的
//亮度-普通滤波器-边界强度Bs=1,2,3
pf->deblock_luma[1] = deblock_v_luma_c;
pf->deblock_luma[0] = deblock_h_luma_c;
//色度的
pf->deblock_chroma[1] = deblock_v_chroma_c;
pf->deblock_h_chroma_420 = deblock_h_chroma_c;
pf->deblock_h_chroma_422 = deblock_h_chroma_422_c;
//亮度-强滤波器-边界强度Bs=4
pf->deblock_luma_intra[1] = deblock_v_luma_intra_c;
pf->deblock_luma_intra[0] = deblock_h_luma_intra_c;
pf->deblock_chroma_intra[1] = deblock_v_chroma_intra_c;
pf->deblock_h_chroma_420_intra = deblock_h_chroma_intra_c;
pf->deblock_h_chroma_422_intra = deblock_h_chroma_422_intra_c;
pf->deblock_luma_mbaff = deblock_h_luma_mbaff_c;
pf->deblock_chroma_420_mbaff = deblock_h_chroma_mbaff_c;
pf->deblock_luma_intra_mbaff = deblock_h_luma_intra_mbaff_c;
pf->deblock_chroma_420_intra_mbaff = deblock_h_chroma_intra_mbaff_c;
pf->deblock_strength = deblock_strength_c;
#if HAVE_MMX
if( cpu&X264_CPU_MMX2 )
{
#if ARCH_X86
pf->deblock_luma[1] = x264_deblock_v_luma_mmx2;
pf->deblock_luma[0] = x264_deblock_h_luma_mmx2;
pf->deblock_chroma[1] = x264_deblock_v_chroma_mmx2;
pf->deblock_h_chroma_420 = x264_deblock_h_chroma_mmx2;
pf->deblock_chroma_420_mbaff = x264_deblock_h_chroma_mbaff_mmx2;
pf->deblock_h_chroma_422 = x264_deblock_h_chroma_422_mmx2;
pf->deblock_h_chroma_422_intra = x264_deblock_h_chroma_422_intra_mmx2;
pf->deblock_luma_intra[1] = x264_deblock_v_luma_intra_mmx2;
pf->deblock_luma_intra[0] = x264_deblock_h_luma_intra_mmx2;
pf->deblock_chroma_intra[1] = x264_deblock_v_chroma_intra_mmx2;
pf->deblock_h_chroma_420_intra = x264_deblock_h_chroma_intra_mmx2;
pf->deblock_chroma_420_intra_mbaff = x264_deblock_h_chroma_intra_mbaff_mmx2;
#endif
//此处省略大量的X86、ARM等平台的汇编函数初始化代码
}
从源代码可以看出，x264_deblock_init()中初始化了一系列环路滤波函数。这些函数名称的规则如下：
（1）包含“v”的是垂直滤波器，用于处理水平边界；包含“h”的是水平滤波器，用于处理垂直边界。
（2）包含“luma”的是亮度滤波器，包含“chroma”的是色度滤波器。
（3）包含“intra”的是处理边界强度Bs为4的强滤波器，不包含“intra”的是普通滤波器。
x264_deblock_init()的输入参数x264_deblock_function_t是一个结构体，其中包含了环路滤波器相关的函数指针。x264_deblock_function_t的定义如下所示。
typedef struct
{
x264_deblock_inter_t deblock_luma[2];
x264_deblock_inter_t deblock_chroma[2];
x264_deblock_inter_t deblock_h_chroma_420;
x264_deblock_inter_t deblock_h_chroma_422;
x264_deblock_intra_t deblock_luma_intra[2];
x264_deblock_intra_t deblock_chroma_intra[2];
x264_deblock_intra_t deblock_h_chroma_420_intra;
x264_deblock_intra_t deblock_h_chroma_422_intra;
x264_deblock_inter_t deblock_luma_mbaff;
x264_deblock_inter_t deblock_chroma_mbaff;
x264_deblock_inter_t deblock_chroma_420_mbaff;
x264_deblock_inter_t deblock_chroma_422_mbaff;
x264_deblock_intra_t deblock_luma_intra_mbaff;
x264_deblock_intra_t deblock_chroma_intra_mbaff;
x264_deblock_intra_t deblock_chroma_420_intra_mbaff;
x264_deblock_intra_t deblock_chroma_422_intra_mbaff;
void (*deblock_strength) ( uint8_t nnz[X264_SCAN8_SIZE], int8_t ref[2][X264_SCAN8_LUMA_SIZE],
int16_t mv[2][X264_SCAN8_LUMA_SIZE][2], uint8_t bs[2][8][4], int mvy_limit,
int bframe );
} x264_deblock_function_t;
x264_deblock_init()的工作就是对x264_deblock_function_t中的函数指针进行赋值。可以看出x264_deblock_function_t中很多的元素是一个包含2个元素的数组，例如deblock_luma[2]，deblock_luma_intra[2]等。这些数组中的元素[0]一般是水平滤波器，而元素[1]是垂直滤波器。下文将会举例分析一个普通边界的亮度垂直滤波器函数deblock_v_luma_c()。
相关知识简述
简单记录一下环路滤波（去块效应滤波）的知识。X264的重建帧（通过解码得到）一般情况下会出现方块效应。产生这种效应的原因主要有两个：
（1）DCT变换后的量化造成误差（主要原因）。
（2）运动补偿
正是由于这种块效应的存在，才需要添加环路滤波器调整相邻的“块”边缘上的像素值以减轻这种视觉上的不连续感。下面一张图显示了环路滤波的效果。图中左边的图没有使用环路滤波，而右边的图使用了环路滤波。
环路滤波分类
环路滤波器根据滤波的强度可以分为两种：
（1）普通滤波器。针对边界的Bs（边界强度）为1、2、3的滤波器。此时环路滤波涉及到方块边界周围的6个点（边界两边各3个点）：p2，p1，p0，q0，q1，q2。需要处理4个点（边界两边各2个点，只以p点为例）：
p0’ = p0 + (((q0 - p0 ) << 2) + (p1 - q1) + 4) >> 3
p1’ = ( p2 + ( ( p0 + q0 + 1 ) >> 1) – 2p1 ) >> 1
（2）强滤波器。针对边界的Bs（边界强度）为4的滤波器。此时环路滤波涉及到方块边界周围的8个点（边界两边各4个点）：p3，p2，p1，p0，q0，q1，q2，q3。需要处理6个点（边界两边各3个点，只以p点为例）：
p0’ = ( p2 + 2*p1 + 2*p0 + 2*q0 + q1 + 4 ) >> 3
p1’ = ( p2 + p1 + p0 + q0 + 2 ) >> 2
p2’ = ( 2*p3 + 3*p2 + p1 + p0 + q0 + 4 ) >> 3
其中上文中提到的边界强度Bs的判定方式如下。
|
条件（针对两边的图像块） |
Bs |
|
有一个块为帧内预测 + 边界为宏块边界 |
4 |
|
有一个块为帧内预测 |
3 |
|
有一个块对残差编码 |
2 |
|
运动矢量差不小于1像素 |
1 |
|
运动补偿参考帧不同 |
1 |
|
其它 |
0 |
总体说来，与帧内预测相关的图像块（帧内预测块）的边界强度比较大，取值为3或者4；与运动补偿相关的图像块（帧间预测块）的边界强度比较小，取值为1。
环路滤波的门限
并不是所有的块的边界处都需要环路滤波。例如画面中物体的边界正好和块的边界重合的话，就不能进行滤波，否则会使画面中物体的边界变模糊。因此需要区别开物体边界和块效应边界。一般情况下，物体边界两边的像素值差别很大，而块效应边界两边像素值差别比较小。《H.264标准》以这个特点定义了2个变量alpha和beta来判决边界是否需要进行环路滤波。只有满足下面三个条件的时候才能进行环路滤波：
| p0 - q0 | < alpha
| p1 – p0 | < beta
| q1 - q0 | < beta
简而言之，就是边界两边的两个点的像素值不能太大，即不能超过alpha；边界一边的前两个点之间的像素值也不能太大，即不能超过beta。其中alpha和beta是根据量化参数QP推算出来（具体方法不再记录）。总体说来QP越大，alpha和beta的值也越大，也就越容易触发环路滤波。由于QP越大表明压缩的程度越大，所以也可以得知高压缩比的情况下更需要进行环路滤波。
deblock_v_luma_c()
deblock_v_luma_c()是一个普通强度的垂直滤波器，用于处理边界强度Bs为1，2，3的水平边界。该函数的定义位于common\deblock.c，如下所示。
//去块效应滤波-普通滤波，Bs为1,2,3
//垂直（Vertical）滤波器
// 边界
// x
// x
// 边界----------
// x
// x
//
//
static void deblock_v_luma_c( pixel *pix, intptr_t stride, int alpha, int beta, int8_t *tc0 )
{
//xstride=stride（用于选择滤波的像素）
//ystride=1
deblock_luma_c( pix, stride, 1, alpha, beta, tc0 );
}
可以看出deblock_v_luma_c()调用了另一个函数deblock_luma_c()。需要注意传递给deblock_luma_c()是一个水平滤波器和垂直滤波器都会调用的“通用”滤波器函数。在这里传递给deblock_luma_c()第二个参数xstride的值为stride，第三个参数ystride的值为1。
deblock_luma_c()
deblock_luma_c()是一个通用的滤波器函数，定义如下所示。
//去块效应滤波-普通滤波，Bs为1,2,3
static inline void deblock_luma_c( pixel *pix, intptr_t xstride, intptr_t ystride, int alpha, int beta, int8_t *tc0 )
{
for( int i = 0; i < 4; i++ )
{
if( tc0[i] < 0 )
{
pix += 4*ystride;
continue;
}
//滤4个像素
for( int d = 0; d < 4; d++, pix += ystride )
deblock_edge_luma_c( pix, xstride, alpha, beta, tc0[i] );
}
}
从源代码中可以看出，具体的滤波在deblock_edge_luma_c()中完成。处理完一个像素后，会继续处理与当前像素距离为ystride的像素。
deblock_edge_luma_c()
deblock_edge_luma_c()用于完成具体的滤波工作。该函数的定义如下所示。
/* From ffmpeg */
//去块效应滤波-普通滤波，Bs为1,2,3
//从FFmpeg复制过来的？
static ALWAYS_INLINE void deblock_edge_luma_c( pixel *pix, intptr_t xstride, int alpha, int beta, int8_t tc0 )
{
//p和q
//如果xstride=stride，ystride=1
//就是处理纵向的6个像素
//对应的是方块的横向边界的滤波，即如下所示：
// p2
// p1
// p0
//=====图像边界=====
// q0
// q1
// q2
//
//如果xstride=1，ystride=stride
//就是处理纵向的6个像素
//对应的是方块的横向边界的滤波，即如下所示：
// ||
// p2 p1 p0 || q0 q1 q2
// ||
// 边界
//注意：这里乘的是xstride
int p2 = pix[-3*xstride];
int p1 = pix[-2*xstride];
int p0 = pix[-1*xstride];
int q0 = pix[ 0*xstride];
int q1 = pix[ 1*xstride];
int q2 = pix[ 2*xstride];
//计算方法参考相关的标准
//alpha和beta是用于检查图像内容的2个参数
//只有满足if()里面3个取值条件的时候（只涉及边界旁边的4个点），才会滤波
if( abs( p0 - q0 ) < alpha && abs( p1 - p0 ) < beta && abs( q1 - q0 ) < beta )
{
int tc = tc0;
int delta;
//上面2个点（p0，p2）满足条件的时候，滤波p1
//int x264_clip3( int v, int i_min, int i_max )用于限幅
if( abs( p2 - p0 ) < beta )
{
if( tc0 )
pix[-2*xstride] = p1 + x264_clip3( (( p2 + ((p0 + q0 + 1) >> 1)) >> 1) - p1, -tc0, tc0 );
tc++;
}
//下面2个点（q0，q2）满足条件的时候，滤波q1
if( abs( q2 - q0 ) < beta )
{
if( tc0 )
pix[ 1*xstride] = q1 + x264_clip3( (( q2 + ((p0 + q0 + 1) >> 1)) >> 1) - q1, -tc0, tc0 );
tc++;
}
delta = x264_clip3( (((q0 - p0 ) << 2) + (p1 - q1) + 4) >> 3, -tc, tc );
//p0
pix[-1*xstride] = x264_clip_pixel( p0 + delta ); /* p0' */
//q0
pix[ 0*xstride] = x264_clip_pixel( q0 - delta ); /* q0' */
}
}
从源代码可以看出，deblock_edge_luma_c()实现了前文记录的滤波公式。
deblock_h_luma_c()
deblock_h_luma_c()是一个普通强度的水平滤波器，用于处理边界强度Bs为1，2，3的垂直边界。该函数的定义如下所示。
//去块效应滤波-普通滤波，Bs为1,2,3
//水平（Horizontal）滤波器
// 边界
// |
// x x x | x x x
// |
static void deblock_h_luma_c( pixel *pix, intptr_t stride, int alpha, int beta, int8_t *tc0 )
{
//xstride=1（用于选择滤波的像素）
//ystride=stride
deblock_luma_c( pix, 1, stride, alpha, beta, tc0 );
}
从源代码可以看出，和deblock_v_luma_c()类似，deblock_h_luma_c()同样调用了deblock_luma_c()函数。唯一的不同在于它传递给deblock_luma_c()的第2个参数xstride为1，第3个参数ystride为stride。
mbcmp_init()
mbcmp_init()函数决定了x264_pixel_function_t中的像素比较的一系列函数（mbcmp[]）使用SAD还是SATD。该函数的定义位于encoder\encoder.c，如下所示。
//决定了像素比较的时候用SAD还是SATD
static void mbcmp_init( x264_t *h )
{
//b_lossless一般为0
//主要看i_subpel_refine，大于1的话就使用SATD
int satd = !h->mb.b_lossless && h->param.analyse.i_subpel_refine > 1;
//sad或者satd赋值给mbcmp
memcpy( h->pixf.mbcmp, satd ? h->pixf.satd : h->pixf.sad_aligned, sizeof(h->pixf.mbcmp) );
memcpy( h->pixf.mbcmp_unaligned, satd ? h->pixf.satd : h->pixf.sad, sizeof(h->pixf.mbcmp_unaligned) );
h->pixf.intra_mbcmp_x3_16x16 = satd ? h->pixf.intra_satd_x3_16x16 : h->pixf.intra_sad_x3_16x16;
h->pixf.intra_mbcmp_x3_8x16c = satd ? h->pixf.intra_satd_x3_8x16c : h->pixf.intra_sad_x3_8x16c;
h->pixf.intra_mbcmp_x3_8x8c = satd ? h->pixf.intra_satd_x3_8x8c : h->pixf.intra_sad_x3_8x8c;
h->pixf.intra_mbcmp_x3_8x8 = satd ? h->pixf.intra_sa8d_x3_8x8 : h->pixf.intra_sad_x3_8x8;
h->pixf.intra_mbcmp_x3_4x4 = satd ? h->pixf.intra_satd_x3_4x4 : h->pixf.intra_sad_x3_4x4;
h->pixf.intra_mbcmp_x9_4x4 = h->param.b_cpu_independent || h->mb.b_lossless ? NULL
: satd ? h->pixf.intra_satd_x9_4x4 : h->pixf.intra_sad_x9_4x4;
h->pixf.intra_mbcmp_x9_8x8 = h->param.b_cpu_independent || h->mb.b_lossless ? NULL
: satd ? h->pixf.intra_sa8d_x9_8x8 : h->pixf.intra_sad_x9_8x8;
satd &= h->param.analyse.i_me_method == X264_ME_TESA;
memcpy( h->pixf.fpelcmp, satd ? h->pixf.satd : h->pixf.sad, sizeof(h->pixf.fpelcmp) );
memcpy( h->pixf.fpelcmp_x3, satd ? h->pixf.satd_x3 : h->pixf.sad_x3, sizeof(h->pixf.fpelcmp_x3) );
memcpy( h->pixf.fpelcmp_x4, satd ? h->pixf.satd_x4 : h->pixf.sad_x4, sizeof(h->pixf.fpelcmp_x4) );
}
从mbcmp_init()的源代码可以看出，当i_subpel_refine取值大于1的时候，satd变量为1，此时后续代码中赋值给mbcmp[]相关的一系列函数指针的函数就是SATD函数；当i_subpel_refine取值小于等于1的时候，satd变量为0，此时后续代码中赋值给mbcmp[]相关的一系列函数指针的函数就是SAD函数。
至此x264_encoder_open()的源代码就分析完毕了。下文继续分析x264_encoder_headers()和x264_encoder_close()函数。
x264_encoder_headers()
x264_encoder_headers()是libx264的一个API函数，用于输出SPS/PPS/SEI这些H.264码流的头信息。该函数的声明如下。
/* x264_encoder_headers: * return the SPS and PPS that will be used for the whole stream. * *pi_nal is the number of NAL units outputted in pp_nal. * returns the number of bytes in the returned NALs. * returns negative on error. * the payloads of all output NALs are guaranteed to be sequential in memory. */ int x264_encoder_headers( x264_t *, x264_nal_t **pp_nal, int *pi_nal );
x264_encoder_headers()的定义位于encoder\encoder.c，如下所示。
/****************************************************************************
* x264_encoder_headers:
* 注释和处理：雷霄骅
* http://blog.csdn.net/leixiaohua1020
* leixiaohua1020@126.com
****************************************************************************/
//输出文件头（SPS、PPS、SEI）
int x264_encoder_headers( x264_t *h, x264_nal_t **pp_nal, int *pi_nal )
{
int frame_size = 0;
/* init bitstream context */
h->out.i_nal = 0;
bs_init( &h->out.bs, h->out.p_bitstream, h->out.i_bitstream );
/* Write SEI, SPS and PPS. */
/* generate sequence parameters */
//输出SPS
x264_nal_start( h, NAL_SPS, NAL_PRIORITY_HIGHEST );
x264_sps_write( &h->out.bs, h->sps );
if( x264_nal_end( h ) )
return -1;
/* generate picture parameters */
x264_nal_start( h, NAL_PPS, NAL_PRIORITY_HIGHEST );
//输出PPS
x264_pps_write( &h->out.bs, h->sps, h->pps );
if( x264_nal_end( h ) )
return -1;
/* identify ourselves */
x264_nal_start( h, NAL_SEI, NAL_PRIORITY_DISPOSABLE );
//输出SEI（其中包含了配置信息）
if( x264_sei_version_write( h, &h->out.bs ) )
return -1;
if( x264_nal_end( h ) )
return -1;
frame_size = x264_encoder_encapsulate_nals( h, 0 );
if( frame_size < 0 )
return -1;
/* now set output*/
*pi_nal = h->out.i_nal;
*pp_nal = &h->out.nal[0];
h->out.i_nal = 0;
return frame_size;
}
从源代码可以看出，x264_encoder_headers()分别调用了x264_sps_write()，x264_pps_write()，x264_sei_version_write()输出了SPS，PPS，和SEI信息。在输出每个NALU之前，需要调用x264_nal_start()，在输出NALU之后，需要调用x264_nal_end()。下文继续分析上述三个函数。
x264_sps_write()
x264_sps_write()用于输出SPS。该函数的定义位于encoder\set.c，如下所示。
//输出SPS
void x264_sps_write( bs_t *s, x264_sps_t *sps )
{
bs_realign( s );
//型profile，8bit
bs_write( s, 8, sps->i_profile_idc );
bs_write1( s, sps->b_constraint_set0 );
bs_write1( s, sps->b_constraint_set1 );
bs_write1( s, sps->b_constraint_set2 );
bs_write1( s, sps->b_constraint_set3 );
bs_write( s, 4, 0 ); /* reserved */
//级level，8bit
bs_write( s, 8, sps->i_level_idc );
//本SPS的 id号
bs_write_ue( s, sps->i_id );
if( sps->i_profile_idc >= PROFILE_HIGH )
{
//色度取样格式
//0代表单色
//1代表4:2:0
//2代表4:2:2
//3代表4:4:4
bs_write_ue( s, sps->i_chroma_format_idc );
if( sps->i_chroma_format_idc == CHROMA_444 )
bs_write1( s, 0 ); // separate_colour_plane_flag
//亮度
//颜色位深=bit_depth_luma_minus8+8
bs_write_ue( s, BIT_DEPTH-8 ); // bit_depth_luma_minus8
//色度与亮度一样
bs_write_ue( s, BIT_DEPTH-8 ); // bit_depth_chroma_minus8
bs_write1( s, sps->b_qpprime_y_zero_transform_bypass );
bs_write1( s, 0 ); // seq_scaling_matrix_present_flag
}
//log2_max_frame_num_minus4主要是为读取另一个句法元素frame_num服务的
//frame_num 是最重要的句法元素之一
//这个句法元素指明了frame_num的所能达到的最大值：
//MaxFrameNum = 2^( log2_max_frame_num_minus4 + 4 )
bs_write_ue( s, sps->i_log2_max_frame_num - 4 );
//pic_order_cnt_type 指明了poc (picture order count) 的编码方法
//poc标识图像的播放顺序。
//由于H.264使用了B帧预测，使得图像的解码顺序并不一定等于播放顺序，但它们之间存在一定的映射关系
//poc 可以由frame-num 通过映射关系计算得来，也可以索性由编码器显式地传送。
//H.264 中一共定义了三种poc 的编码方法
bs_write_ue( s, sps->i_poc_type );
if( sps->i_poc_type == 0 )
bs_write_ue( s, sps->i_log2_max_poc_lsb - 4 );
//num_ref_frames 指定参考帧队列可能达到的最大长度，解码器依照这个句法元素的值开辟存储区，这个存储区用于存放已解码的参考帧，
//H.264 规定最多可用16 个参考帧，因此最大值为16。
bs_write_ue( s, sps->i_num_ref_frames );
bs_write1( s, sps->b_gaps_in_frame_num_value_allowed );
//pic_width_in_mbs_minus1加1后为图像宽（以宏块为单位）：
// PicWidthInMbs = pic_width_in_mbs_minus1 + 1
//以像素为单位图像宽度（亮度）：width=PicWidthInMbs*16
bs_write_ue( s, sps->i_mb_width - 1 );
//pic_height_in_map_units_minus1加1后指明图像高度（以宏块为单位）
bs_write_ue( s, (sps->i_mb_height >> !sps->b_frame_mbs_only) - 1);
bs_write1( s, sps->b_frame_mbs_only );
if( !sps->b_frame_mbs_only )
bs_write1( s, sps->b_mb_adaptive_frame_field );
bs_write1( s, sps->b_direct8x8_inference );
bs_write1( s, sps->b_crop );
if( sps->b_crop )
{
int h_shift = sps->i_chroma_format_idc == CHROMA_420 || sps->i_chroma_format_idc == CHROMA_422;
int v_shift = sps->i_chroma_format_idc == CHROMA_420;
bs_write_ue( s, sps->crop.i_left >> h_shift );
bs_write_ue( s, sps->crop.i_right >> h_shift );
bs_write_ue( s, sps->crop.i_top >> v_shift );
bs_write_ue( s, sps->crop.i_bottom >> v_shift );
}
bs_write1( s, sps->b_vui );
if( sps->b_vui )
{
bs_write1( s, sps->vui.b_aspect_ratio_info_present );
if( sps->vui.b_aspect_ratio_info_present )
{
int i;
static const struct { uint8_t w, h, sar; } sar[] =
{
// aspect_ratio_idc = 0 -> unspecified
{ 1, 1, 1 }, { 12, 11, 2 }, { 10, 11, 3 }, { 16, 11, 4 },
{ 40, 33, 5 }, { 24, 11, 6 }, { 20, 11, 7 }, { 32, 11, 8 },
{ 80, 33, 9 }, { 18, 11, 10}, { 15, 11, 11}, { 64, 33, 12},
{160, 99, 13}, { 4, 3, 14}, { 3, 2, 15}, { 2, 1, 16},
// aspect_ratio_idc = [17..254] -> reserved
{ 0, 0, 255 }
};
for( i = 0; sar[i].sar != 255; i++ )
{
if( sar[i].w == sps->vui.i_sar_width &&
sar[i].h == sps->vui.i_sar_height )
break;
}
bs_write( s, 8, sar[i].sar );
if( sar[i].sar == 255 ) /* aspect_ratio_idc (extended) */
{
bs_write( s, 16, sps->vui.i_sar_width );
bs_write( s, 16, sps->vui.i_sar_height );
}
}
bs_write1( s, sps->vui.b_overscan_info_present );
if( sps->vui.b_overscan_info_present )
bs_write1( s, sps->vui.b_overscan_info );
bs_write1( s, sps->vui.b_signal_type_present );
if( sps->vui.b_signal_type_present )
{
bs_write( s, 3, sps->vui.i_vidformat );
bs_write1( s, sps->vui.b_fullrange );
bs_write1( s, sps->vui.b_color_description_present );
if( sps->vui.b_color_description_present )
{
bs_write( s, 8, sps->vui.i_colorprim );
bs_write( s, 8, sps->vui.i_transfer );
bs_write( s, 8, sps->vui.i_colmatrix );
}
}
bs_write1( s, sps->vui.b_chroma_loc_info_present );
if( sps->vui.b_chroma_loc_info_present )
{
bs_write_ue( s, sps->vui.i_chroma_loc_top );
bs_write_ue( s, sps->vui.i_chroma_loc_bottom );
}
bs_write1( s, sps->vui.b_timing_info_present );
if( sps->vui.b_timing_info_present )
{
bs_write32( s, sps->vui.i_num_units_in_tick );
bs_write32( s, sps->vui.i_time_scale );
bs_write1( s, sps->vui.b_fixed_frame_rate );
}
bs_write1( s, sps->vui.b_nal_hrd_parameters_present );
if( sps->vui.b_nal_hrd_parameters_present )
{
bs_write_ue( s, sps->vui.hrd.i_cpb_cnt - 1 );
bs_write( s, 4, sps->vui.hrd.i_bit_rate_scale );
bs_write( s, 4, sps->vui.hrd.i_cpb_size_scale );
bs_write_ue( s, sps->vui.hrd.i_bit_rate_value - 1 );
bs_write_ue( s, sps->vui.hrd.i_cpb_size_value - 1 );
bs_write1( s, sps->vui.hrd.b_cbr_hrd );
bs_write( s, 5, sps->vui.hrd.i_initial_cpb_removal_delay_length - 1 );
bs_write( s, 5, sps->vui.hrd.i_cpb_removal_delay_length - 1 );
bs_write( s, 5, sps->vui.hrd.i_dpb_output_delay_length - 1 );
bs_write( s, 5, sps->vui.hrd.i_time_offset_length );
}
bs_write1( s, sps->vui.b_vcl_hrd_parameters_present );
if( sps->vui.b_nal_hrd_parameters_present || sps->vui.b_vcl_hrd_parameters_present )
bs_write1( s, 0 ); /* low_delay_hrd_flag */
bs_write1( s, sps->vui.b_pic_struct_present );
bs_write1( s, sps->vui.b_bitstream_restriction );
if( sps->vui.b_bitstream_restriction )
{
bs_write1( s, sps->vui.b_motion_vectors_over_pic_boundaries );
bs_write_ue( s, sps->vui.i_max_bytes_per_pic_denom );
bs_write_ue( s, sps->vui.i_max_bits_per_mb_denom );
bs_write_ue( s, sps->vui.i_log2_max_mv_length_horizontal );
bs_write_ue( s, sps->vui.i_log2_max_mv_length_vertical );
bs_write_ue( s, sps->vui.i_num_reorder_frames );
bs_write_ue( s, sps->vui.i_max_dec_frame_buffering );
}
}
//RBSP拖尾
//无论比特流当前位置是否字节对齐 ， 都向其中写入一个比特1及若干个（0~7个）比特0 ， 使其字节对齐
bs_rbsp_trailing( s );
bs_flush( s );
}
可以看出x264_sps_write()将x264_sps_t结构体中的信息输出出来形成了一个NALU。有关SPS相关的知识可以参考《H.264标准》。
x264_pps_write()
x264_pps_write()用于输出PPS。该函数的定义位于encoder\set.c，如下所示。
//输出PPS
void x264_pps_write( bs_t *s, x264_sps_t *sps, x264_pps_t *pps )
{
bs_realign( s );
//PPS的ID
bs_write_ue( s, pps->i_id );
//该PPS引用的SPS的ID
bs_write_ue( s, pps->i_sps_id );
//entropy_coding_mode_flag
//0表示熵编码使用CAVLC，1表示熵编码使用CABAC
bs_write1( s, pps->b_cabac );
bs_write1( s, pps->b_pic_order );
bs_write_ue( s, pps->i_num_slice_groups - 1 );
bs_write_ue( s, pps->i_num_ref_idx_l0_default_active - 1 );
bs_write_ue( s, pps->i_num_ref_idx_l1_default_active - 1 );
//P Slice 是否使用加权预测？
bs_write1( s, pps->b_weighted_pred );
//B Slice 是否使用加权预测？
bs_write( s, 2, pps->b_weighted_bipred );
//pic_init_qp_minus26加26后用以指明亮度分量的QP的初始值。
bs_write_se( s, pps->i_pic_init_qp - 26 - QP_BD_OFFSET );
bs_write_se( s, pps->i_pic_init_qs - 26 - QP_BD_OFFSET );
bs_write_se( s, pps->i_chroma_qp_index_offset );
bs_write1( s, pps->b_deblocking_filter_control );
bs_write1( s, pps->b_constrained_intra_pred );
bs_write1( s, pps->b_redundant_pic_cnt );
if( pps->b_transform_8x8_mode || pps->i_cqm_preset != X264_CQM_FLAT )
{
bs_write1( s, pps->b_transform_8x8_mode );
bs_write1( s, (pps->i_cqm_preset != X264_CQM_FLAT) );
if( pps->i_cqm_preset != X264_CQM_FLAT )
{
scaling_list_write( s, pps, CQM_4IY );
scaling_list_write( s, pps, CQM_4IC );
bs_write1( s, 0 ); // Cr = Cb
scaling_list_write( s, pps, CQM_4PY );
scaling_list_write( s, pps, CQM_4PC );
bs_write1( s, 0 ); // Cr = Cb
if( pps->b_transform_8x8_mode )
{
if( sps->i_chroma_format_idc == CHROMA_444 )
{
scaling_list_write( s, pps, CQM_8IY+4 );
scaling_list_write( s, pps, CQM_8IC+4 );
bs_write1( s, 0 ); // Cr = Cb
scaling_list_write( s, pps, CQM_8PY+4 );
scaling_list_write( s, pps, CQM_8PC+4 );
bs_write1( s, 0 ); // Cr = Cb
}
else
{
scaling_list_write( s, pps, CQM_8IY+4 );
scaling_list_write( s, pps, CQM_8PY+4 );
}
}
}
bs_write_se( s, pps->i_chroma_qp_index_offset );
}
//RBSP拖尾
//无论比特流当前位置是否字节对齐 ， 都向其中写入一个比特1及若干个（0~7个）比特0 ， 使其字节对齐
bs_rbsp_trailing( s );
bs_flush( s );
}
可以看出x264_pps_write()将x264_pps_t结构体中的信息输出出来形成了一个NALU。
x264_sei_version_write()
x264_sei_version_write()用于输出SEI。SEI中一般存储了H.264中的一些附加信息，例如下图中红色方框中的文字就是x264存储在SEI中的中的信息。
x264_sei_version_write()的定义位于encoder\set.c，如下所示。
//输出SEI（其中包含了配置信息）
int x264_sei_version_write( x264_t *h, bs_t *s )
{
// random ID number generated according to ISO-11578
static const uint8_t uuid[16] =
{
0xdc, 0x45, 0xe9, 0xbd, 0xe6, 0xd9, 0x48, 0xb7,
0x96, 0x2c, 0xd8, 0x20, 0xd9, 0x23, 0xee, 0xef
};
//把设置信息转换为字符串
char *opts = x264_param2string( &h->param, 0 );
char *payload;
int length;
if( !opts )
return -1;
CHECKED_MALLOC( payload, 200 + strlen( opts ) );
memcpy( payload, uuid, 16 );
//配置信息的内容
//opts字符串内容还是挺多的
sprintf( payload+16, "x264 - core %d%s - H.264/MPEG-4 AVC codec - "
"Copy%s 2003-2014 - http://www.videolan.org/x264.html - options: %s",
X264_BUILD, X264_VERSION, HAVE_GPL?"left":"right", opts );
length = strlen(payload)+1;
//输出SEI
//数据类型为USER_DATA_UNREGISTERED
x264_sei_write( s, (uint8_t *)payload, length, SEI_USER_DATA_UNREGISTERED );
x264_free( opts );
x264_free( payload );
return 0;
fail:
x264_free( opts );
return -1;
}
从源代码可以看出，x264_sei_version_write()首先调用了x264_param2string()将当前的配置参数保存到字符串opts[]中，然后调用sprintf()结合opt[]生成完整的SEI信息，最后调用x264_sei_write()输出SEI信息。在这个过程中涉及到一个libx264的API函数x264_param2string()。
x264_param2string()
x264_param2string()用于将当前设置转换为字符串输出出来。该函数的声明如下。
/* x264_param2string: return a (malloced) string containing most of * the encoding options */ char *x264_param2string( x264_param_t *p, int b_res );
x264_param2string()的定义位于common\common.c，如下所示。
/****************************************************************************
* x264_param2string:
****************************************************************************/
//把设置信息转换为字符串
char *x264_param2string( x264_param_t *p, int b_res )
{
int len = 1000;
char *buf, *s;
if( p->rc.psz_zones )
len += strlen(p->rc.psz_zones);
//1000字节？
buf = s = x264_malloc( len );
if( !buf )
return NULL;
if( b_res )
{
s += sprintf( s, "%dx%d ", p->i_width, p->i_height );
s += sprintf( s, "fps=%u/%u ", p->i_fps_num, p->i_fps_den );
s += sprintf( s, "timebase=%u/%u ", p->i_timebase_num, p->i_timebase_den );
s += sprintf( s, "bitdepth=%d ", BIT_DEPTH );
}
if( p->b_opencl )
s += sprintf( s, "opencl=%d ", p->b_opencl );
s += sprintf( s, "cabac=%d", p->b_cabac );
s += sprintf( s, " ref=%d", p->i_frame_reference );
s += sprintf( s, " deblock=%d:%d:%d", p->b_deblocking_filter,
p->i_deblocking_filter_alphac0, p->i_deblocking_filter_beta );
s += sprintf( s, " analyse=%#x:%#x", p->analyse.intra, p->analyse.inter );
s += sprintf( s, " me=%s", x264_motion_est_names[ p->analyse.i_me_method ] );
s += sprintf( s, " subme=%d", p->analyse.i_subpel_refine );
s += sprintf( s, " psy=%d", p->analyse.b_psy );
if( p->analyse.b_psy )
s += sprintf( s, " psy_rd=%.2f:%.2f", p->analyse.f_psy_rd, p->analyse.f_psy_trellis );
s += sprintf( s, " mixed_ref=%d", p->analyse.b_mixed_references );
s += sprintf( s, " me_range=%d", p->analyse.i_me_range );
s += sprintf( s, " chroma_me=%d", p->analyse.b_chroma_me );
s += sprintf( s, " trellis=%d", p->analyse.i_trellis );
s += sprintf( s, " 8x8dct=%d", p->analyse.b_transform_8x8 );
s += sprintf( s, " cqm=%d", p->i_cqm_preset );
s += sprintf( s, " deadzone=%d,%d", p->analyse.i_luma_deadzone[0], p->analyse.i_luma_deadzone[1] );
s += sprintf( s, " fast_pskip=%d", p->analyse.b_fast_pskip );
s += sprintf( s, " chroma_qp_offset=%d", p->analyse.i_chroma_qp_offset );
s += sprintf( s, " threads=%d", p->i_threads );
s += sprintf( s, " lookahead_threads=%d", p->i_lookahead_threads );
s += sprintf( s, " sliced_threads=%d", p->b_sliced_threads );
if( p->i_slice_count )
s += sprintf( s, " slices=%d", p->i_slice_count );
if( p->i_slice_count_max )
s += sprintf( s, " slices_max=%d", p->i_slice_count_max );
if( p->i_slice_max_size )
s += sprintf( s, " slice_max_size=%d", p->i_slice_max_size );
if( p->i_slice_max_mbs )
s += sprintf( s, " slice_max_mbs=%d", p->i_slice_max_mbs );
if( p->i_slice_min_mbs )
s += sprintf( s, " slice_min_mbs=%d", p->i_slice_min_mbs );
s += sprintf( s, " nr=%d", p->analyse.i_noise_reduction );
s += sprintf( s, " decimate=%d", p->analyse.b_dct_decimate );
s += sprintf( s, " interlaced=%s", p->b_interlaced ? p->b_tff ? "tff" : "bff" : p->b_fake_interlaced ? "fake" : "0" );
s += sprintf( s, " bluray_compat=%d", p->b_bluray_compat );
if( p->b_stitchable )
s += sprintf( s, " stitchable=%d", p->b_stitchable );
s += sprintf( s, " constrained_intra=%d", p->b_constrained_intra );
s += sprintf( s, " bframes=%d", p->i_bframe );
if( p->i_bframe )
{
s += sprintf( s, " b_pyramid=%d b_adapt=%d b_bias=%d direct=%d weightb=%d open_gop=%d",
p->i_bframe_pyramid, p->i_bframe_adaptive, p->i_bframe_bias,
p->analyse.i_direct_mv_pred, p->analyse.b_weighted_bipred, p->b_open_gop );
}
s += sprintf( s, " weightp=%d", p->analyse.i_weighted_pred > 0 ? p->analyse.i_weighted_pred : 0 );
if( p->i_keyint_max == X264_KEYINT_MAX_INFINITE )
s += sprintf( s, " keyint=infinite" );
else
s += sprintf( s, " keyint=%d", p->i_keyint_max );
s += sprintf( s, " keyint_min=%d scenecut=%d intra_refresh=%d",
p->i_keyint_min, p->i_scenecut_threshold, p->b_intra_refresh );
if( p->rc.b_mb_tree || p->rc.i_vbv_buffer_size )
s += sprintf( s, " rc_lookahead=%d", p->rc.i_lookahead );
s += sprintf( s, " rc=%s mbtree=%d", p->rc.i_rc_method == X264_RC_ABR ?
( p->rc.b_stat_read ? "2pass" : p->rc.i_vbv_max_bitrate == p->rc.i_bitrate ? "cbr" : "abr" )
: p->rc.i_rc_method == X264_RC_CRF ? "crf" : "cqp", p->rc.b_mb_tree );
if( p->rc.i_rc_method == X264_RC_ABR || p->rc.i_rc_method == X264_RC_CRF )
{
if( p->rc.i_rc_method == X264_RC_CRF )
s += sprintf( s, " crf=%.1f", p->rc.f_rf_constant );
else
s += sprintf( s, " bitrate=%d ratetol=%.1f",
p->rc.i_bitrate, p->rc.f_rate_tolerance );
s += sprintf( s, " qcomp=%.2f qpmin=%d qpmax=%d qpstep=%d",
p->rc.f_qcompress, p->rc.i_qp_min, p->rc.i_qp_max, p->rc.i_qp_step );
if( p->rc.b_stat_read )
s += sprintf( s, " cplxblur=%.1f qblur=%.1f",
p->rc.f_complexity_blur, p->rc.f_qblur );
if( p->rc.i_vbv_buffer_size )
{
s += sprintf( s, " vbv_maxrate=%d vbv_bufsize=%d",
p->rc.i_vbv_max_bitrate, p->rc.i_vbv_buffer_size );
if( p->rc.i_rc_method == X264_RC_CRF )
s += sprintf( s, " crf_max=%.1f", p->rc.f_rf_constant_max );
}
}
else if( p->rc.i_rc_method == X264_RC_CQP )
s += sprintf( s, " qp=%d", p->rc.i_qp_constant );
if( p->rc.i_vbv_buffer_size )
s += sprintf( s, " nal_hrd=%s filler=%d", x264_nal_hrd_names[p->i_nal_hrd], p->rc.b_filler );
if( p->crop_rect.i_left | p->crop_rect.i_top | p->crop_rect.i_right | p->crop_rect.i_bottom )
s += sprintf( s, " crop_rect=%u,%u,%u,%u", p->crop_rect.i_left, p->crop_rect.i_top,
p->crop_rect.i_right, p->crop_rect.i_bottom );
if( p->i_frame_packing >= 0 )
s += sprintf( s, " frame-packing=%d", p->i_frame_packing );
if( !(p->rc.i_rc_method == X264_RC_CQP && p->rc.i_qp_constant == 0) )
{
s += sprintf( s, " ip_ratio=%.2f", p->rc.f_ip_factor );
if( p->i_bframe && !p->rc.b_mb_tree )
s += sprintf( s, " pb_ratio=%.2f", p->rc.f_pb_factor );
s += sprintf( s, " aq=%d", p->rc.i_aq_mode );
if( p->rc.i_aq_mode )
s += sprintf( s, ":%.2f", p->rc.f_aq_strength );
if( p->rc.psz_zones )
s += sprintf( s, " zones=%s", p->rc.psz_zones );
else if( p->rc.i_zones )
s += sprintf( s, " zones" );
}
return buf;
}
可以看出x264_param2string()几乎遍历了libx264的所有设置选项，使用“s += sprintf()”的形式将它们连接成一个很长的字符串，并最终将该字符串返回。
x264_encoder_close()
x264_encoder_close()是libx264的一个API函数。该函数用于关闭编码器，同时输出一些统计信息。该函数执行的时候输出的统计信息如下图所示。
x264_encoder_close()的声明如下所示。
/* x264_encoder_close: * close an encoder handler */ void x264_encoder_close ( x264_t * );
x264_encoder_close()的定义位于encoder\encoder.c，如下所示。
/****************************************************************************
* x264_encoder_close:
* 注释和处理：雷霄骅
* http://blog.csdn.net/leixiaohua1020
* leixiaohua1020@126.com
****************************************************************************/
void x264_encoder_close ( x264_t *h )
{
int64_t i_yuv_size = FRAME_SIZE( h->param.i_width * h->param.i_height );
int64_t i_mb_count_size[2][7] = {{0}};
char buf[200];
int b_print_pcm = h->stat.i_mb_count[SLICE_TYPE_I][I_PCM]
|| h->stat.i_mb_count[SLICE_TYPE_P][I_PCM]
|| h->stat.i_mb_count[SLICE_TYPE_B][I_PCM];
x264_lookahead_delete( h );
#if HAVE_OPENCL
x264_opencl_lookahead_delete( h );
x264_opencl_function_t *ocl = h->opencl.ocl;
#endif
if( h->param.b_sliced_threads )
x264_threadpool_wait_all( h );
if( h->param.i_threads > 1 )
x264_threadpool_delete( h->threadpool );
if( h->param.i_lookahead_threads > 1 )
x264_threadpool_delete( h->lookaheadpool );
if( h->i_thread_frames > 1 )
{
for( int i = 0; i < h->i_thread_frames; i++ )
if( h->thread[i]->b_thread_active )
{
assert( h->thread[i]->fenc->i_reference_count == 1 );
x264_frame_delete( h->thread[i]->fenc );
}
x264_t *thread_prev = h->thread[h->i_thread_phase];
x264_thread_sync_ratecontrol( h, thread_prev, h );
x264_thread_sync_ratecontrol( thread_prev, thread_prev, h );
h->i_frame = thread_prev->i_frame + 1 - h->i_thread_frames;
}
h->i_frame++;
/*
* x264控制台输出示例
*
* x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX
* x264 [info]: profile High, level 2.1
* x264 [info]: frame I:2 Avg QP:20.51 size: 20184 PSNR Mean Y:45.32 U:47.54 V:47.62 Avg:45.94 Global:45.52
* x264 [info]: frame P:33 Avg QP:23.08 size: 3230 PSNR Mean Y:43.23 U:47.06 V:46.87 Avg:44.15 Global:44.00
* x264 [info]: frame B:65 Avg QP:27.87 size: 352 PSNR Mean Y:42.76 U:47.21 V:47.05 Avg:43.79 Global:43.65
* x264 [info]: consecutive B-frames: 3.0% 10.0% 63.0% 24.0%
* x264 [info]: mb I I16..4: 15.3% 37.5% 47.3%
* x264 [info]: mb P I16..4: 0.6% 0.4% 0.2% P16..4: 34.6% 21.2% 12.7% 0.0% 0.0% skip:30.4%
* x264 [info]: mb B I16..4: 0.0% 0.0% 0.0% B16..8: 21.2% 4.1% 0.7% direct: 0.8% skip:73.1% L0:28.7% L1:53.0% BI:18.3%
* x264 [info]: 8x8 transform intra:37.1% inter:51.0%
* x264 [info]: coded y,uvDC,uvAC intra: 74.1% 83.3% 58.9% inter: 10.4% 6.6% 0.4%
* x264 [info]: i16 v,h,dc,p: 21% 25% 7% 48%
* x264 [info]: i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 25% 23% 13% 6% 5% 5% 6% 8% 10%
* x264 [info]: i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 22% 20% 9% 7% 7% 8% 8% 7% 12%
* x264 [info]: i8c dc,h,v,p: 43% 20% 27% 10%
* x264 [info]: Weighted P-Frames: Y:0.0% UV:0.0%
* x264 [info]: ref P L0: 62.5% 19.7% 13.8% 4.0%
* x264 [info]: ref B L0: 88.8% 9.4% 1.9%
* x264 [info]: ref B L1: 92.6% 7.4%
* x264 [info]: PSNR Mean Y:42.967 U:47.163 V:47.000 Avg:43.950 Global:43.796 kb/s:339.67
*
* encoded 100 frames, 178.25 fps, 339.67 kb/s
*
*/
/* Slices used and PSNR */
/* 示例
* x264 [info]: frame I:2 Avg QP:20.51 size: 20184 PSNR Mean Y:45.32 U:47.54 V:47.62 Avg:45.94 Global:45.52
* x264 [info]: frame P:33 Avg QP:23.08 size: 3230 PSNR Mean Y:43.23 U:47.06 V:46.87 Avg:44.15 Global:44.00
* x264 [info]: frame B:65 Avg QP:27.87 size: 352 PSNR Mean Y:42.76 U:47.21 V:47.05 Avg:43.79 Global:43.65
*/
for( int i = 0; i < 3; i++ )
{
static const uint8_t slice_order[] = { SLICE_TYPE_I, SLICE_TYPE_P, SLICE_TYPE_B };
int i_slice = slice_order[i];
if( h->stat.i_frame_count[i_slice] > 0 )
{
int i_count = h->stat.i_frame_count[i_slice];
double dur = h->stat.f_frame_duration[i_slice];
if( h->param.analyse.b_psnr )
{
//输出统计信息-包含PSNR
//注意PSNR都是通过SSD换算过来的，换算方法就是调用x264_psnr()方法
x264_log( h, X264_LOG_INFO,
"frame %c:%-5d Avg QP:%5.2f size:%6.0f PSNR Mean Y:%5.2f U:%5.2f V:%5.2f Avg:%5.2f Global:%5.2f\n",
slice_type_to_char[i_slice],
i_count,
h->stat.f_frame_qp[i_slice] / i_count,
(double)h->stat.i_frame_size[i_slice] / i_count,
h->stat.f_psnr_mean_y[i_slice] / dur, h->stat.f_psnr_mean_u[i_slice] / dur, h->stat.f_psnr_mean_v[i_slice] / dur,
h->stat.f_psnr_average[i_slice] / dur,
x264_psnr( h->stat.f_ssd_global[i_slice], dur * i_yuv_size ) );
}
else
{
//输出统计信息-不包含PSNR
x264_log( h, X264_LOG_INFO,
"frame %c:%-5d Avg QP:%5.2f size:%6.0f\n",
slice_type_to_char[i_slice],
i_count,
h->stat.f_frame_qp[i_slice] / i_count,
(double)h->stat.i_frame_size[i_slice] / i_count );
}
}
}
/* 示例
* x264 [info]: consecutive B-frames: 3.0% 10.0% 63.0% 24.0%
*
*/
if( h->param.i_bframe && h->stat.i_frame_count[SLICE_TYPE_B] )
{
//B帧相关信息
char *p = buf;
int den = 0;
// weight by number of frames (including the I/P-frames) that are in a sequence of N B-frames
for( int i = 0; i <= h->param.i_bframe; i++ )
den += (i+1) * h->stat.i_consecutive_bframes[i];
for( int i = 0; i <= h->param.i_bframe; i++ )
p += sprintf( p, " %4.1f%%", 100. * (i+1) * h->stat.i_consecutive_bframes[i] / den );
x264_log( h, X264_LOG_INFO, "consecutive B-frames:%s\n", buf );
}
for( int i_type = 0; i_type < 2; i_type++ )
for( int i = 0; i < X264_PARTTYPE_MAX; i++ )
{
if( i == D_DIRECT_8x8 ) continue; /* direct is counted as its own type */
i_mb_count_size[i_type][x264_mb_partition_pixel_table[i]] += h->stat.i_mb_partition[i_type][i];
}
/* MB types used */
/* 示例
* x264 [info]: mb I I16..4: 15.3% 37.5% 47.3%
* x264 [info]: mb P I16..4: 0.6% 0.4% 0.2% P16..4: 34.6% 21.2% 12.7% 0.0% 0.0% skip:30.4%
* x264 [info]: mb B I16..4: 0.0% 0.0% 0.0% B16..8: 21.2% 4.1% 0.7% direct: 0.8% skip:73.1% L0:28.7% L1:53.0% BI:18.3%
*/
if( h->stat.i_frame_count[SLICE_TYPE_I] > 0 )
{
int64_t *i_mb_count = h->stat.i_mb_count[SLICE_TYPE_I];
double i_count = h->stat.i_frame_count[SLICE_TYPE_I] * h->mb.i_mb_count / 100.0;
//Intra宏块信息-存于buf
//从左到右3个信息，依次为I16x16,I8x8,I4x4
x264_print_intra( i_mb_count, i_count, b_print_pcm, buf );
x264_log( h, X264_LOG_INFO, "mb I %s\n", buf );
}
if( h->stat.i_frame_count[SLICE_TYPE_P] > 0 )
{
int64_t *i_mb_count = h->stat.i_mb_count[SLICE_TYPE_P];
double i_count = h->stat.i_frame_count[SLICE_TYPE_P] * h->mb.i_mb_count / 100.0;
int64_t *i_mb_size = i_mb_count_size[SLICE_TYPE_P];
//Intra宏块信息-存于buf
x264_print_intra( i_mb_count, i_count, b_print_pcm, buf );
//Intra宏块信息-放在最前面
//后面添加P宏块信息
//从左到右6个信息，依次为P16x16, P16x8+P8x16, P8x8, P8x4+P4x8, P4x4, PSKIP
x264_log( h, X264_LOG_INFO,
"mb P %s P16..4: %4.1f%% %4.1f%% %4.1f%% %4.1f%% %4.1f%% skip:%4.1f%%\n",
buf,
i_mb_size[PIXEL_16x16] / (i_count*4),
(i_mb_size[PIXEL_16x8] + i_mb_size[PIXEL_8x16]) / (i_count*4),
i_mb_size[PIXEL_8x8] / (i_count*4),
(i_mb_size[PIXEL_8x4] + i_mb_size[PIXEL_4x8]) / (i_count*4),
i_mb_size[PIXEL_4x4] / (i_count*4),
i_mb_count[P_SKIP] / i_count );
}
if( h->stat.i_frame_count[SLICE_TYPE_B] > 0 )
{
int64_t *i_mb_count = h->stat.i_mb_count[SLICE_TYPE_B];
double i_count = h->stat.i_frame_count[SLICE_TYPE_B] * h->mb.i_mb_count / 100.0;
double i_mb_list_count;
int64_t *i_mb_size = i_mb_count_size[SLICE_TYPE_B];
int64_t list_count[3] = {0}; /* 0 == L0, 1 == L1, 2 == BI */
//Intra宏块信息
x264_print_intra( i_mb_count, i_count, b_print_pcm, buf );
for( int i = 0; i < X264_PARTTYPE_MAX; i++ )
for( int j = 0; j < 2; j++ )
{
int l0 = x264_mb_type_list_table[i][0][j];
int l1 = x264_mb_type_list_table[i][1][j];
if( l0 || l1 )
list_count[l1+l0*l1] += h->stat.i_mb_count[SLICE_TYPE_B][i] * 2;
}
list_count[0] += h->stat.i_mb_partition[SLICE_TYPE_B][D_L0_8x8];
list_count[1] += h->stat.i_mb_partition[SLICE_TYPE_B][D_L1_8x8];
list_count[2] += h->stat.i_mb_partition[SLICE_TYPE_B][D_BI_8x8];
i_mb_count[B_DIRECT] += (h->stat.i_mb_partition[SLICE_TYPE_B][D_DIRECT_8x8]+2)/4;
i_mb_list_count = (list_count[0] + list_count[1] + list_count[2]) / 100.0;
//Intra宏块信息-放在最前面
//后面添加B宏块信息
//从左到右5个信息，依次为B16x16, B16x8+B8x16, B8x8, BDIRECT, BSKIP
//
//SKIP和DIRECT区别
//P_SKIP的CBP为0,无像素残差，无运动矢量残
//B_SKIP宏块的模式为B_DIRECT且CBP为0,无像素残差，无运动矢量残
//B_DIRECT的CBP不为0,有像素残差，无运动矢量残
sprintf( buf + strlen(buf), " B16..8: %4.1f%% %4.1f%% %4.1f%% direct:%4.1f%% skip:%4.1f%%",
i_mb_size[PIXEL_16x16] / (i_count*4),
(i_mb_size[PIXEL_16x8] + i_mb_size[PIXEL_8x16]) / (i_count*4),
i_mb_size[PIXEL_8x8] / (i_count*4),
i_mb_count[B_DIRECT] / i_count,
i_mb_count[B_SKIP] / i_count );
if( i_mb_list_count != 0 )
sprintf( buf + strlen(buf), " L0:%4.1f%% L1:%4.1f%% BI:%4.1f%%",
list_count[0] / i_mb_list_count,
list_count[1] / i_mb_list_count,
list_count[2] / i_mb_list_count );
x264_log( h, X264_LOG_INFO, "mb B %s\n", buf );
}
//码率控制信息
/* 示例
* x264 [info]: final ratefactor: 20.01
*/
x264_ratecontrol_summary( h );
if( h->stat.i_frame_count[SLICE_TYPE_I] + h->stat.i_frame_count[SLICE_TYPE_P] + h->stat.i_frame_count[SLICE_TYPE_B] > 0 )
{
#define SUM3(p) (p[SLICE_TYPE_I] + p[SLICE_TYPE_P] + p[SLICE_TYPE_B])
#define SUM3b(p,o) (p[SLICE_TYPE_I][o] + p[SLICE_TYPE_P][o] + p[SLICE_TYPE_B][o])
int64_t i_i8x8 = SUM3b( h->stat.i_mb_count, I_8x8 );
int64_t i_intra = i_i8x8 + SUM3b( h->stat.i_mb_count, I_4x4 )
+ SUM3b( h->stat.i_mb_count, I_16x16 );
int64_t i_all_intra = i_intra + SUM3b( h->stat.i_mb_count, I_PCM);
int64_t i_skip = SUM3b( h->stat.i_mb_count, P_SKIP )
+ SUM3b( h->stat.i_mb_count, B_SKIP );
const int i_count = h->stat.i_frame_count[SLICE_TYPE_I] +
h->stat.i_frame_count[SLICE_TYPE_P] +
h->stat.i_frame_count[SLICE_TYPE_B];
int64_t i_mb_count = (int64_t)i_count * h->mb.i_mb_count;
int64_t i_inter = i_mb_count - i_skip - i_intra;
const double duration = h->stat.f_frame_duration[SLICE_TYPE_I] +
h->stat.f_frame_duration[SLICE_TYPE_P] +
h->stat.f_frame_duration[SLICE_TYPE_B];
float f_bitrate = SUM3(h->stat.i_frame_size) / duration / 125;
//隔行
if( PARAM_INTERLACED )
{
char *fieldstats = buf;
fieldstats[0] = 0;
if( i_inter )
fieldstats += sprintf( fieldstats, " inter:%.1f%%", h->stat.i_mb_field[1] * 100.0 / i_inter );
if( i_skip )
fieldstats += sprintf( fieldstats, " skip:%.1f%%", h->stat.i_mb_field[2] * 100.0 / i_skip );
x264_log( h, X264_LOG_INFO, "field mbs: intra: %.1f%%%s\n",
h->stat.i_mb_field[0] * 100.0 / i_intra, buf );
}
//8x8DCT信息
if( h->pps->b_transform_8x8_mode )
{
buf[0] = 0;
if( h->stat.i_mb_count_8x8dct[0] )
sprintf( buf, " inter:%.1f%%", 100. * h->stat.i_mb_count_8x8dct[1] / h->stat.i_mb_count_8x8dct[0] );
x264_log( h, X264_LOG_INFO, "8x8 transform intra:%.1f%%%s\n", 100. * i_i8x8 / i_intra, buf );
}
if( (h->param.analyse.i_direct_mv_pred == X264_DIRECT_PRED_AUTO ||
(h->stat.i_direct_frames[0] && h->stat.i_direct_frames[1]))
&& h->stat.i_frame_count[SLICE_TYPE_B] )
{
x264_log( h, X264_LOG_INFO, "direct mvs spatial:%.1f%% temporal:%.1f%%\n",
h->stat.i_direct_frames[1] * 100. / h->stat.i_frame_count[SLICE_TYPE_B],
h->stat.i_direct_frames[0] * 100. / h->stat.i_frame_count[SLICE_TYPE_B] );
}
buf[0] = 0;
int csize = CHROMA444 ? 4 : 1;
if( i_mb_count != i_all_intra )
sprintf( buf, " inter: %.1f%% %.1f%% %.1f%%",
h->stat.i_mb_cbp[1] * 100.0 / ((i_mb_count - i_all_intra)*4),
h->stat.i_mb_cbp[3] * 100.0 / ((i_mb_count - i_all_intra)*csize),
h->stat.i_mb_cbp[5] * 100.0 / ((i_mb_count - i_all_intra)*csize) );
/*
* 示例
* x264 [info]: coded y,uvDC,uvAC intra: 74.1% 83.3% 58.9% inter: 10.4% 6.6% 0.4%
*/
x264_log( h, X264_LOG_INFO, "coded y,%s,%s intra: %.1f%% %.1f%% %.1f%%%s\n",
CHROMA444?"u":"uvDC", CHROMA444?"v":"uvAC",
h->stat.i_mb_cbp[0] * 100.0 / (i_all_intra*4),
h->stat.i_mb_cbp[2] * 100.0 / (i_all_intra*csize),
h->stat.i_mb_cbp[4] * 100.0 / (i_all_intra*csize), buf );
/*
* 帧内预测信息
* 从上到下分别为I16x16,I8x8,I4x4
* 从左到右顺序为Vertical, Horizontal, DC, Plane ....
*
* 示例
*
* x264 [info]: i16 v,h,dc,p: 21% 25% 7% 48%
* x264 [info]: i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 25% 23% 13% 6% 5% 5% 6% 8% 10%
* x264 [info]: i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 22% 20% 9% 7% 7% 8% 8% 7% 12%
* x264 [info]: i8c dc,h,v,p: 43% 20% 27% 10%
*
*/
int64_t fixed_pred_modes[4][9] = {{0}};
int64_t sum_pred_modes[4] = {0};
for( int i = 0; i <= I_PRED_16x16_DC_128; i++ )
{
fixed_pred_modes[0][x264_mb_pred_mode16x16_fix[i]] += h->stat.i_mb_pred_mode[0][i];
sum_pred_modes[0] += h->stat.i_mb_pred_mode[0][i];
}
if( sum_pred_modes[0] )
x264_log( h, X264_LOG_INFO, "i16 v,h,dc,p: %2.0f%% %2.0f%% %2.0f%% %2.0f%%\n",
fixed_pred_modes[0][0] * 100.0 / sum_pred_modes[0],
fixed_pred_modes[0][1] * 100.0 / sum_pred_modes[0],
fixed_pred_modes[0][2] * 100.0 / sum_pred_modes[0],
fixed_pred_modes[0][3] * 100.0 / sum_pred_modes[0] );
for( int i = 1; i <= 2; i++ )
{
for( int j = 0; j <= I_PRED_8x8_DC_128; j++ )
{
fixed_pred_modes[i][x264_mb_pred_mode4x4_fix(j)] += h->stat.i_mb_pred_mode[i][j];
sum_pred_modes[i] += h->stat.i_mb_pred_mode[i][j];
}
if( sum_pred_modes[i] )
x264_log( h, X264_LOG_INFO, "i%d v,h,dc,ddl,ddr,vr,hd,vl,hu: %2.0f%% %2.0f%% %2.0f%% %2.0f%% %2.0f%% %2.0f%% %2.0f%% %2.0f%% %2.0f%%\n", (3-i)*4,
fixed_pred_modes[i][0] * 100.0 / sum_pred_modes[i],
fixed_pred_modes[i][1] * 100.0 / sum_pred_modes[i],
fixed_pred_modes[i][2] * 100.0 / sum_pred_modes[i],
fixed_pred_modes[i][3] * 100.0 / sum_pred_modes[i],
fixed_pred_modes[i][4] * 100.0 / sum_pred_modes[i],
fixed_pred_modes[i][5] * 100.0 / sum_pred_modes[i],
fixed_pred_modes[i][6] * 100.0 / sum_pred_modes[i],
fixed_pred_modes[i][7] * 100.0 / sum_pred_modes[i],
fixed_pred_modes[i][8] * 100.0 / sum_pred_modes[i] );
}
for( int i = 0; i <= I_PRED_CHROMA_DC_128; i++ )
{
fixed_pred_modes[3][x264_mb_chroma_pred_mode_fix[i]] += h->stat.i_mb_pred_mode[3][i];
sum_pred_modes[3] += h->stat.i_mb_pred_mode[3][i];
}
if( sum_pred_modes[3] && !CHROMA444 )
x264_log( h, X264_LOG_INFO, "i8c dc,h,v,p: %2.0f%% %2.0f%% %2.0f%% %2.0f%%\n",
fixed_pred_modes[3][0] * 100.0 / sum_pred_modes[3],
fixed_pred_modes[3][1] * 100.0 / sum_pred_modes[3],
fixed_pred_modes[3][2] * 100.0 / sum_pred_modes[3],
fixed_pred_modes[3][3] * 100.0 / sum_pred_modes[3] );
if( h->param.analyse.i_weighted_pred >= X264_WEIGHTP_SIMPLE && h->stat.i_frame_count[SLICE_TYPE_P] > 0 )
x264_log( h, X264_LOG_INFO, "Weighted P-Frames: Y:%.1f%% UV:%.1f%%\n",
h->stat.i_wpred[0] * 100.0 / h->stat.i_frame_count[SLICE_TYPE_P],
h->stat.i_wpred[1] * 100.0 / h->stat.i_frame_count[SLICE_TYPE_P] );
/*
* 参考帧信息
* 从左到右依次为不同序号的参考帧
*
* 示例
*
* x264 [info]: ref P L0: 62.5% 19.7% 13.8% 4.0%
* x264 [info]: ref B L0: 88.8% 9.4% 1.9%
* x264 [info]: ref B L1: 92.6% 7.4%
*
*/
for( int i_list = 0; i_list < 2; i_list++ )
for( int i_slice = 0; i_slice < 2; i_slice++ )
{
char *p = buf;
int64_t i_den = 0;
int i_max = 0;
for( int i = 0; i < X264_REF_MAX*2; i++ )
if( h->stat.i_mb_count_ref[i_slice][i_list][i] )
{
i_den += h->stat.i_mb_count_ref[i_slice][i_list][i];
i_max = i;
}
if( i_max == 0 )
continue;
for( int i = 0; i <= i_max; i++ )
p += sprintf( p, " %4.1f%%", 100. * h->stat.i_mb_count_ref[i_slice][i_list][i] / i_den );
x264_log( h, X264_LOG_INFO, "ref %c L%d:%s\n", "PB"[i_slice], i_list, buf );
}
if( h->param.analyse.b_ssim )
{
float ssim = SUM3( h->stat.f_ssim_mean_y ) / duration;
x264_log( h, X264_LOG_INFO, "SSIM Mean Y:%.7f (%6.3fdb)\n", ssim, x264_ssim( ssim ) );
}
/*
* 示例
*
* x264 [info]: PSNR Mean Y:42.967 U:47.163 V:47.000 Avg:43.950 Global:43.796 kb/s:339.67
*
*/
if( h->param.analyse.b_psnr )
{
x264_log( h, X264_LOG_INFO,
"PSNR Mean Y:%6.3f U:%6.3f V:%6.3f Avg:%6.3f Global:%6.3f kb/s:%.2f\n",
SUM3( h->stat.f_psnr_mean_y ) / duration,
SUM3( h->stat.f_psnr_mean_u ) / duration,
SUM3( h->stat.f_psnr_mean_v ) / duration,
SUM3( h->stat.f_psnr_average ) / duration,
x264_psnr( SUM3( h->stat.f_ssd_global ), duration * i_yuv_size ),
f_bitrate );
}
else
x264_log( h, X264_LOG_INFO, "kb/s:%.2f\n", f_bitrate );
}
//各种释放
/* rc */
x264_ratecontrol_delete( h );
/* param */
if( h->param.rc.psz_stat_out )
free( h->param.rc.psz_stat_out );
if( h->param.rc.psz_stat_in )
free( h->param.rc.psz_stat_in );
x264_cqm_delete( h );
x264_free( h->nal_buffer );
x264_free( h->reconfig_h );
x264_analyse_free_costs( h );
if( h->i_thread_frames > 1 )
h = h->thread[h->i_thread_phase];
/* frames */
x264_frame_delete_list( h->frames.unused[0] );
x264_frame_delete_list( h->frames.unused[1] );
x264_frame_delete_list( h->frames.current );
x264_frame_delete_list( h->frames.blank_unused );
h = h->thread[0];
for( int i = 0; i < h->i_thread_frames; i++ )
if( h->thread[i]->b_thread_active )
for( int j = 0; j < h->thread[i]->i_ref[0]; j++ )
if( h->thread[i]->fref[0][j] && h->thread[i]->fref[0][j]->b_duplicate )
x264_frame_delete( h->thread[i]->fref[0][j] );
if( h->param.i_lookahead_threads > 1 )
for( int i = 0; i < h->param.i_lookahead_threads; i++ )
x264_free( h->lookahead_thread[i] );
for( int i = h->param.i_threads - 1; i >= 0; i-- )
{
x264_frame_t **frame;
if( !h->param.b_sliced_threads || i == 0 )
{
for( frame = h->thread[i]->frames.reference; *frame; frame++ )
{
assert( (*frame)->i_reference_count > 0 );
(*frame)->i_reference_count--;
if( (*frame)->i_reference_count == 0 )
x264_frame_delete( *frame );
}
frame = &h->thread[i]->fdec;
if( *frame )
{
assert( (*frame)->i_reference_count > 0 );
(*frame)->i_reference_count--;
if( (*frame)->i_reference_count == 0 )
x264_frame_delete( *frame );
}
x264_macroblock_cache_free( h->thread[i] );
}
x264_macroblock_thread_free( h->thread[i], 0 );
x264_free( h->thread[i]->out.p_bitstream );
x264_free( h->thread[i]->out.nal );
x264_pthread_mutex_destroy( &h->thread[i]->mutex );
x264_pthread_cond_destroy( &h->thread[i]->cv );
x264_free( h->thread[i] );
}
#if HAVE_OPENCL
x264_opencl_close_library( ocl );
#endif
}
从源代码可以看出，x264_encoder_close()主要用于输出编码的统计信息。源代码中已经做了比较充分的注释，就不再详细叙述了。其中输出日志的时候用到了libx264中输出日志的API函数libx264()，下面记录一下。
x264_log()
x264_log()用于输出日志。该函数的定义位于common\common.c，如下所示。
/****************************************************************************
* x264_log:
****************************************************************************/
//日志输出函数
void x264_log( x264_t *h, int i_level, const char *psz_fmt, ... )
{
if( !h || i_level <= h->param.i_log_level )
{
va_list arg;
va_start( arg, psz_fmt );
if( !h )
x264_log_default( NULL, i_level, psz_fmt, arg );//默认日志输出函数
else
h->param.pf_log( h->param.p_log_private, i_level, psz_fmt, arg );
va_end( arg );
}
}
可以看出x264_log()再开始的时候做了一个判断：只有该条日志级别i_level小于当前系统的日志级别param.i_log_level的时候，才会输出日志。libx264中定义了下面几种日志级别，数值越小，代表日志越紧急。
/* Log level */ #define X264_LOG_NONE (-1) #define X264_LOG_ERROR 0 #define X264_LOG_WARNING 1 #define X264_LOG_INFO 2 #define X264_LOG_DEBUG 3
接下来x264_log()会根据输入的结构体x264_t是否为空来决定是调用x264_log_default()或者是x264_t中的param.pf_log()函数。假如都使用默认配置的话，param.pf_log()在x264_param_default()函数中也会被设置为指向x264_log_default()。因此可以继续看一下x264_log_default()函数。
x264_log_default()
x264_log_default()是libx264默认的日志输出函数。该函数的定义如下所示。
//默认日志输出函数
static void x264_log_default( void *p_unused, int i_level, const char *psz_fmt, va_list arg )
{
char *psz_prefix;
//日志级别
switch( i_level )
{
case X264_LOG_ERROR:
psz_prefix = "error";
break;
case X264_LOG_WARNING:
psz_prefix = "warning";
break;
case X264_LOG_INFO:
psz_prefix = "info";
break;
case X264_LOG_DEBUG:
psz_prefix = "debug";
break;
default:
psz_prefix = "unknown";
break;
}
//日志级别两边加上“[]”
//输出到stderr
fprintf( stderr, "x264 [%s]: ", psz_prefix );
x264_vfprintf( stderr, psz_fmt, arg );
}
从源代码可以看出，x264_log_default()会在日志信息前面加上形如“x264 [日志级别]”的信息，然后将处理后的日志输出到stderr。
至此，对x264中x264_encoder_open()，x264_encoder_headers()，和x264_encoder_close()这三个函数的分析就完成了。下一篇文章继续记录x264编码器主干部分的x264_encoder_encode()函数。
雷霄骅
leixiaohua1020@126.com
http://blog.csdn.net/leixiaohua1020
x264源代码简单分析：编码器主干部分-1的更多相关文章
- x264源代码简单分析：编码器主干部分-2
===================================================== H.264源代码分析文章列表: [编码 - x264] x264源代码简单分析:概述 x26 ...
- x264源代码简单分析：熵编码（Entropy Encoding）部分
===================================================== H.264源代码分析文章列表: [编码 - x264] x264源代码简单分析:概述 x26 ...
- x264源代码简单分析：宏块编码（Encode）部分
===================================================== H.264源代码分析文章列表: [编码 - x264] x264源代码简单分析:概述 x26 ...
- x264源代码简单分析：宏块分析（Analysis）部分-帧间宏块（Inter）
===================================================== H.264源代码分析文章列表: [编码 - x264] x264源代码简单分析:概述 x26 ...
- x264源代码简单分析：宏块分析（Analysis）部分-帧内宏块（Intra）
===================================================== H.264源代码分析文章列表: [编码 - x264] x264源代码简单分析:概述 x26 ...
- x264源代码简单分析：滤波（Filter）部分
===================================================== H.264源代码分析文章列表: [编码 - x264] x264源代码简单分析:概述 x26 ...
- x264源代码简单分析：x264_slice_write()
===================================================== H.264源代码分析文章列表: [编码 - x264] x264源代码简单分析:概述 x26 ...
- x264源代码简单分析：x264命令行工具（x264.exe）
===================================================== H.264源代码分析文章列表: [编码 - x264] x264源代码简单分析:概述 x26 ...
- x264源代码简单分析：概述
===================================================== H.264源代码分析文章列表: [编码 - x264] x264源代码简单分析:概述 x26 ...
随机推荐
- [HNOI2002]彩票
题目描述 某地发行一套彩票.彩票上写有1到M这M个自然数.彩民可以在这M个数中任意选取N个不同的数打圈.每个彩民只能买一张彩票,不同的彩民的彩票上的选择不同. 每次抽奖将抽出两个自然数X和Y.如果某人 ...
- Codeforces278E Tourists
来自FallDream的博客,未经允许,请勿转载,谢谢. 给定一张无向图,有点权,要支持单点修改点权和询问从一个点到另一个点不重复经过节点的路径上点权最小值的最小值. n,m<=10^5 考虑求 ...
- [BZOJ]1071 组队(SCOI2007)
一道比较NB的套路题. Description NBA每年都有球员选秀环节.通常用速度和身高两项数据来衡量一个篮球运动员的基本素质.假如一支球队里速度最慢的球员速度为minV,身高最矮的球员高度为mi ...
- BZOJ4589 Hard Nim（快速沃尔什变换模板）
终于抽出时间来学了学,比FFT不知道好写到哪里去. #include <cstdio> typedef long long ll; ,p=1e9+; int k,m,n,a[N],pi[N ...
- [Project] Simulate HTTP Post Request to obtain data from Web Page by using Python Scrapy Framework
1. Background Though it's always difficult to give child a perfect name, parent never give up trying ...
- VMware下安装Linux（CentOs6.3）操作系统
VMware 10.0.2 CentOs 6.3 VMware的安装以及CentOs的下载比较简单,这里不再描述 1.创建新的虚拟机 2.选择典型 3.选择稍后安装操作系统 4.选择如图所示 5.虚拟 ...
- 图像融合之拉普拉斯融合（laplacian blending）
一.拉普拉斯融合基本步骤 1. 两幅图像L,R,以及二值掩模mask,给定金字塔层数level. 2. 分别根据L,R构建其对应的拉普拉斯残差金字塔(层数为level),并保留高斯金字塔下采样最顶端的 ...
- application-config.xml和mvc-config.xml的区别
头一个放bean之类的东西 后一个放controllers, view resolvers之类的东西
- 使用foreach需要判空。
今天写代码的时候,需要遍历一个作为参数传递进来的容器, 当时顺手就加上了判空条件: if(null==list)return; 后来就像,不知道遍历(foreach)有没有帮我做这个工作: 下面看实验 ...
- python--ftp服务器（pyftpdlib）
# -*- coding: utf-8 -*-# @Time : 2018/4/11 16:47# @Author : liuxiaobing# @File : test2.py# @Software ...