一、后台一直在获取用户的定位,需要给用户电池消耗提示

Your app uses the Location Background mode but does not include the required "battery use" disclaimer in your app description.

Next Steps

Please add the following disclaimer to your Application Description:

"Continued use of GPS running in the background can dramatically decrease battery life."

Resources

Since your iTunes Connect Application State is Metadata Rejected, we do NOT require a new binary. To revise the metadata, visit iTunes Connect to select your app and revise the desired metadata values. Once you’ve completed all changes, reply to this message in Resolution Center and we will continue the review.

NOTE: Please be sure to make any metadata changes to all App Localizations by selecting each specific localization and making appropriate changes.

在iTunes中的“内容提要”中添加一个用户提示,参照“百度地图”,详情如下:

二、iOS9之后要添加https协议请求,具体的参照,iOS9新特性

三、 审核的时候,国外的网速比较的慢,访问不到数据,一开始以为是ipv6的问题,其实是网络访问速度慢,appstore审核人员没有耐心,直接被拒了,打回来的原因如下:

We discovered one or more bugs in your app when reviewed on iPhone running iOS 9.3.2 on Wi-Fi connected to an IPv6 network.

Specifically, the login button is unresponsive when tapped.

The steps to reproduce are:

1. Launch the application
2. Proceed to the login page
3. Tap the login button
4. No further action occurs

Please refer to the attached screenshot for more information.
Next Steps

Please run your app on a device while connected to an IPv6 network (all apps must support IPv6) to identify the issue(s), then revise and resubmit your app for review.

If we misunderstood the intended behavior of your app, please reply to this message in Resolution Center to provide information on how these features were intended to work.

For new apps, uninstall all previous versions of your app from a device, then install and follow the steps to reproduce the issue(s). For updates, install the new version as an update to the previous version, then follow the steps to reproduce the issue(s).

Resources

For information about supporting IPv6 Networks, please refer to Supporting IPv6 DNS64/NAT64 Networks and About Networking

If you have difficulty reproducing a reported issue, please try testing the workflow described in Technical Q&A QA1764: How to reproduce bugs reported against App Store submissions.

If you have code-level questions after utilizing the above resources, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log

四、虚拟商品的支付需要使用项目内购,刚开始接触这个不知道,直接使用的支付宝进行的支付,悲剧了,具体原因如下:

We discovered one or more bugs in your app when reviewed on iPhone running iOS 10.1.1 on Wi-Fi connected to an IPv6 network.

Specifically, we found the button “个人VIP” was still unresponsive during the review.

We've attached screenshot(s) for your reference.

Next Steps

Please run your app on a device while connected to an IPv6 network (all apps must support IPv6) to identify the issue(s), then revise and resubmit your app for review.

If we misunderstood the intended behavior of your app, please reply to this message in Resolution Center to provide information on how these features were intended to work.

For new apps, uninstall all previous versions of your app from a device, then install and follow the steps to reproduce the issue(s). For updates, install the new version as an update to the previous version, then follow the steps to reproduce the issue(s).

Resources

For information about supporting IPv6 Networks, please refer to Supporting IPv6 DNS64/NAT64 Networks and About Networking

Legal - 5.1.1

We noticed that your app requires users to register with personal information that is not relevant to the app's functionality. Specifically, the following fields are required, but do not have any relevance to the app:

公司
职务

Next Steps

Information requested during registration must be relevant to the features the app provides. Please remove all required fields that are not relevant to the app or make it clear that those fields are optional.

Information Needed

We began the review of your app but aren't able to continue because we need additional information about your app.

At your earliest opportunity, please review the following question(s) and provide as much detailed information as you can. The more information you can provide upfront, the sooner we can complete your review.

- Does your app access any paid content or services?
- What are the paid content or services, and what are the costs?
- Who pays for the content or services?
- Where do they pay, and what's the payment method?
- If users create an account to use your app, are there fees involved?
- How do users obtain an account?

Once you reply to this message in Resolution Center with the requested information, we can proceed with your review.

If you have difficulty reproducing a reported issue, please try testing the workflow described in Technical Q&A QA1764: How to reproduce bugs reported against App Store submissions.

If you have code-level questions after utilizing the above resources, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log

五、微信扫二维码跳转app store下载界面

参考网站:http://wiki.open.qq.com/index.php?title=mobile/应用宝微下载

六、Archive打包的时候,报错:An SSL error has occurred and a secure connection to the server cannot be made.

关机不一定有用,删除过期的证书,重新导入证书。

具体参考:http://www.cnblogs.com/yipingios/p/6236539.html

iOS 上架被拒原因保存的更多相关文章

  1. iOS上架被拒原因及解决办法

    简单的记录一下,近期APP上架所遇到的坑爹事儿吧!! 第一次提交: 第二天给了回复,内容如下: .Guideline - Performance - Software Requirements You ...

  2. iOS App被拒原因以及解决方案总结。

    Guideline 1.2 - Safety - User Generated Content Your app enables the display of user-generated conte ...

  3. iOS上架被拒理由及相关解决方案记录

    注:苹果客服中国区电话:4006 701 855 最近公司上线一个电动车工具类项目,被拒无数次,今天上架了,记录一下 01 苹果拒绝理由(内购和后台定位) We noticed that your a ...

  4. iOS AppStore 被拒原因

    De : Apple 3.12 - Apps should have all included URLs fully functional when you submit it for review, ...

  5. iOS审核被拒大全

    崩溃和bug 当你完成应用开发并准备发布时应该将App提交审核.在提交审核前,要确保已经在设备上对应用程序进行了彻底的测试,修复了所有的bug. 断掉的链接 应用程序中所有的链接必须是功能性的.对于所 ...

  6. iOS上架的整体流程和建议

    App Store上架指的是iOS应用从提交申请到上线的整个过程,它的目的是让应用展示在App Store上获取流量.用户. 一.iOS上架的整体流程 1.申请开发者账号 苹果的开发者账号主要分为三种 ...

  7. 公布IOS产品被拒后怎样再上传新公布包

    问题描写叙述: 前两天提交公司产品2.0.7版本号到苹果审核,昨天提示被拒绝. 被拒原因就不描写叙述了. 我们经过改动后.又一次打包上传,但是怎么也提交不了.由于在苹果后台上已经存在2.0.7版本号的 ...

  8. iOS上架ipa上传问题那些事

    iOS上架ipa上传问题那些事 原文: http://www.jianshu.com/p/1e22543285c2 字数513 阅读312 评论0 喜欢1 通过xcode直接打包上传,不会提示你的ip ...

  9. IOS版本被拒的经历

    IOS版本被拒的经历: 1,登陆方式依赖外部平台 因为我们的APP是只用微博登陆,想做成类似meerkat类型的,也能各种消息都同步微博. 结果当然行不通,这个确实是不听好人言,网上多个人都说过这个问 ...

随机推荐

  1. (转)C#调用默认浏览器打开网页的几种方法

    转载,原文地址:http://blog.csdn.net/testcs_dn/article/details/42246969 CSharp调用默认浏览器打开网页的几种方法 示例界面: 方法一:从注册 ...

  2. iOS项目中安装和使用 Cocoapods

    1.首先我们要打开我们的终端: 2.在终端输入 这条命令  gem sources -l 2.1如果是和我是一样的显示,则镜像已添加,无需更改,如果不一样,则需要进行更改 这里输出的如果是 https ...

  3. Junit3断言

    在Robotium自动化测试的过程中,发现没有断言的脚本是没有意义的,现整理Junit3和Junit4的断言,供日后查阅. http://junit.org/ Junit3断言API: http:// ...

  4. gulp和grunt的区别

    1. Grunt -> Gulp 早些年提到构建工具,难免会让人联想到历史比较悠久的Make,Ant,以及后来为了更方便的构建结构类似的Java项目而出现的Maven.Node催生了一批自动化工 ...

  5. Android IOS WebRTC 音视频开发总结(八十一)-- WebRTC靠谱吗?有没有适合的SDK推荐?

    作者:blaker,最早发表在我们的微信公众和[编风网],详见[这里] 支持原创,转载必须注明出处,欢迎关注我的微信公众号blacker(微信ID:blackerteam 或 webrtcorgcn) ...

  6. <fmt:formatDate>标签的输出格式:

    <fmt:formatDate>标签的输出格式:  d   月中的某一天.一位数的日期没有前导零.      dd   月中的某一天.一位数的日期有一个前导零.      ddd   周中 ...

  7. spring注解记录

    集中记录spring常见注解 供今后查阅 @ControllerAdvice: ControllerAdvice的定义为: @Target(ElementType.TYPE) @Retention(R ...

  8. centos服务器全新安装php,apache环境

    留个备份,有空研究一下. 1 yum install php56w-devel.x86_64 yum install httpd-devel.x86_64 vim /etc/php.ini vim / ...

  9. post请求接口

    /// <summary> /// post 调用接口 /// </summary> /// <param name="xmlRequest"> ...

  10. MySQL 第二篇

    一.MySQL多实例介绍 mysql多实例,共用一套mysql安装程序,使用不同的配置文件(my.cnf).启动程序.和数据文件,即在一台服务器上同时开启多个不同的服务器端口(3306,3307),同 ...