DirectX11 学习笔记4 - 一个完整的封装框架

watermark/2/text/aHR0cDovL2Jsb2cuY3Nkbi5uZXQvY3EzNjExMDYzMDY=/font/5a6L5L2T/fontsize/400/fill/I0JBQkFCMA==/dissolve/70/gravity/Center" alt="">

本程序主要由5个文件组成。1个CPP 4个H文件  本来H文件能够分为4个CPP4个H，可是感觉太多了，就写到一起了

XMain

这个文件就是windows程序的入口函数

<span style="font-size:14px;">//入口
int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, PSTR pScmdline, int iCmdshow)
{

	XWindow *xwindow=new XWindow;
	xwindow->init(); //初始化
	xwindow->close();
	delete xwindow;
	return 0;
}</span>

接下来就是进入XWindow.h

XWindow.h

首先是init()

xwidth=500;
	xheight=400;
	x_input=new XInput;
	x_graphics=new XGraphics;

	//创建窗体
	initWindows(xwidth,xheight,L"Engine");
	//初始化键盘
	x_input->init();
	//初始化渲染
	x_graphics->init(xwidth,xheight,m_hwnd);

	//消息循环
	runWindows();
	//关闭窗体
	closeWindows();

主要就是创建了 窗体，键初始化，渲染初始化。 然后就能够開始我们的消息循环了。

窗体初始化学过windows编程的就知道比較简单。然后x_input后面讲。

唯一与Directx相关的就是消息循环和渲染了。

当中消息循环：

MSG msg;
	// 初始化消息结构.
	ZeroMemory(&msg, sizeof(MSG));
	// 循环进行消息处理
	while(!Xexit)
	{
		// 处理windows消息.
		if(PeekMessage(&msg, NULL, 0, 0, PM_REMOVE))
		{
			TranslateMessage(&msg);
			DispatchMessage(&msg);
		}
		// 接收到WM_QUIT消息，退出程序.
		if(msg.message == WM_QUIT)
		{
			Xexit=true;
		}
		else
		{
			//渲染
			Xexit=!frame();
		}

	}

加了一个frame函数， 意思就是除了接受windows的正常消息之外。还不断的循环着一个函数frame.

这个frame就是渲染有关的啦。

bool XWindow::frame()
{
	//推断是否按下ESC键
	if(x_input->isKeyDown(VK_ESCAPE))
		return false;
	//開始渲染
	return x_graphics->frame();
}

bool XGraphics::frame()
{
	bool hr=render();
	return hr;
}

bool XGraphics::render()
{
	x_d3d->begin(0.0f,0.0f,0.5f,1.0f);//蓝色
	x_d3d->end();
	return true;
}

如上面一层一层的调用。

事实上终于就是绘制了一个蓝色的背景。之所以写这么多层，而不在一个程序里2行代码搞定，是由于之后的project越来越大，所有放一个文件。会很难分析其逻辑，并且很难改动。

XGraphics

以后主要代码就是写在这个类里面了。如今还是空空的。

XD3Device

这个类就是做这个框架的意义了。

里面的init() 初始化了一堆非常复杂，非常烦躁的。  设备链，深度模板缓冲，各种状态绑定等等。都是一次性的。

后面仅仅须要改改參数即可。所以把它隔离到这个类。

仅仅要在用的时候轻轻调用一个函数就能够了

bool XGraphics:: init(int screenWidth, int screenHeight, HWND hwnd)
{
	x_d3d=new XD3Device;
	bool hr=x_d3d->init(screenWidth,screenHeight,VSYNC_ENABLED,hwnd,FULL_SCREEN,SCREEN_DEPTH,SCREEN_NEAR);
	if(!hr)
	{
		MessageBox(hwnd, L"Could not initialize Direct3D", L"Error", MB_OK);
		return false;
	}
	return true;
}

所有代码

XGraphics.h

效果

#pragma once

#include <windows.h>
#include "XD3Device.h"
/////////////
// GLOBALS //
/////////////
const bool  FULL_SCREEN = false; //是否全屏
const bool  VSYNC_ENABLED = true; //是否垂直同步
const float SCREEN_DEPTH = 1000.0f; //深度，远点
const float SCREEN_NEAR = 0.1f; //深度，近点

class XGraphics
{
public:
	bool init(int, int, HWND); //初始化渲染设备
	void close();
	bool frame();

private:
	bool render();
private:
	XD3Device *x_d3d;
};

bool XGraphics:: init(int screenWidth, int screenHeight, HWND hwnd)
{
	x_d3d=new XD3Device;
	bool hr=x_d3d->init(screenWidth,screenHeight,VSYNC_ENABLED,hwnd,FULL_SCREEN,SCREEN_DEPTH,SCREEN_NEAR);
	if(!hr)
	{
		MessageBox(hwnd, L"Could not initialize Direct3D", L"Error", MB_OK);
		return false;
	}
	return true;
}

void XGraphics::close()
{
	if(x_d3d)
	{
		x_d3d->close();
		delete x_d3d;
		x_d3d=0;
	}
}

bool XGraphics::frame()
{
	bool hr=render();
	return hr;
}

bool XGraphics::render()
{
	x_d3d->begin(0.0f,0.0f,0.5f,1.0f);//蓝色
	x_d3d->end();
	return true;
}

XWindows.h

#pragma once
//定义该宏可以降低windows头文件的大小，使编译器不编译一些不必要的文件，加快编译时间
#define WIN32_LEAN_AND_MEAN
#include <Windows.h>
#include "XGraphics.h"
#include "XInput.h"
//退出
static bool Xexit=false;
//全屏
static bool fullScreen=false;
class XWindow
{
private:
	//窗体类名字
	LPCWSTR m_applicationName;
	//实例句柄
	HINSTANCE m_hinstance;
	//窗体句柄
	HWND m_hwnd;
	int xwidth,xheight;
	//按键类
	XInput * x_input;
	//图形类
	XGraphics * x_graphics;
private:
	//初始化窗体
	void initWindows(int& screenWidth, int& screenHeight,LPCWSTR m_applicationName);
	//关闭窗体
	void closeWindows();
	//消息循环
	void runWindows();

public:
	//初始化全局
	virtual void init();
	//渲染
	virtual bool frame();
	//退出
	virtual void close();
	//消息函数
	LRESULT CALLBACK MessageHandler(HWND, UINT, WPARAM, LPARAM);
};
//消息循环回调函数
static LRESULT CALLBACK WndProc(HWND, UINT, WPARAM, LPARAM);
static XWindow * appXWindow=NULL;
void XWindow::close()
{
	if(x_input)
	{
		delete x_input;
		x_input=NULL;
	}
	if(x_graphics)
	{
		x_graphics->close();
		delete x_graphics;
		x_graphics=NULL;
	}
}
void XWindow::init()
{
	xwidth=500;
	xheight=400;
	x_input=new XInput;
	x_graphics=new XGraphics;

	//创建窗体
	initWindows(xwidth,xheight,L"Engine");
	//初始化键盘
	x_input->init();
	//初始化渲染
	x_graphics->init(xwidth,xheight,m_hwnd);

	//消息循环
	runWindows();
	//关闭窗体
	closeWindows();
}
bool XWindow::frame()
{
	//推断是否按下ESC键
	if(x_input->isKeyDown(VK_ESCAPE))
		return false;
	//開始渲染
	return x_graphics->frame();
}
void XWindow::initWindows(int& screenWidth, int& screenHeight,LPCWSTR m_applicationName)
{
	WNDCLASSEX wc;
	DEVMODE dmScreenSettings;
	int posX, posY;
	this->m_applicationName=m_applicationName;
	// 得到应用程序实例句柄
	m_hinstance = GetModuleHandle(NULL);
	appXWindow=this;
	// 设置窗体类參数.
	wc.style         = CS_HREDRAW | CS_VREDRAW | CS_OWNDC; 

	wc.lpfnWndProc   = WndProc; //指定回调函数
	wc.cbClsExtra    = 0;
	wc.cbWndExtra    = 0;
	wc.hInstance     = m_hinstance;
	wc.hIcon         = LoadIcon(NULL, IDI_WINLOGO);
	wc.hIconSm       = wc.hIcon;
	wc.hCursor       = LoadCursor(NULL, IDC_ARROW);
	wc.hbrBackground = (HBRUSH)GetStockObject(BLACK_BRUSH); //默认黑色窗体黑色背景
	wc.lpszMenuName  = NULL;
	wc.lpszClassName = m_applicationName;
	wc.cbSize        = sizeof(WNDCLASSEX);

	// 注冊窗体类
	RegisterClassEx(&wc);

	// 依据是否全屏设置不同的分辨率.
	if(fullScreen)
	{
		// 得到windows桌面分辨率
		screenWidth  = GetSystemMetrics(SM_CXSCREEN);
		screenHeight = GetSystemMetrics(SM_CYSCREEN);
		//全屏模式下。设置窗体大小为windows桌面分辨率.
		memset(&dmScreenSettings, 0, sizeof(dmScreenSettings));
		dmScreenSettings.dmSize       = sizeof(dmScreenSettings);
		dmScreenSettings.dmPelsWidth  = (unsigned long)screenWidth;
		dmScreenSettings.dmPelsHeight = (unsigned long)screenHeight;
		dmScreenSettings.dmBitsPerPel = 32;
		dmScreenSettings.dmFields     = DM_BITSPERPEL | DM_PELSWIDTH | DM_PELSHEIGHT;

		// 暂时设置显示设备为全屏模式，注意：应用程序退出时候。将恢复系统默认设置。

ChangeDisplaySettings(&dmScreenSettings, CDS_FULLSCREEN);

		// 设置窗体的左上角坐标位置为(0,0).
		posX = posY = 0;
	}
	else
	{
		// 窗体左上角坐标位置,posX, posY
		posX = (GetSystemMetrics(SM_CXSCREEN) - screenWidth)  / 2;
		posY = (GetSystemMetrics(SM_CYSCREEN) - screenHeight) / 2;
	}

	// 全屏和窗体使用不同的參数.
	if( fullScreen)
	{
		m_hwnd = CreateWindowEx(WS_EX_APPWINDOW, m_applicationName, m_applicationName,
			WS_CLIPSIBLINGS | WS_CLIPCHILDREN | WS_POPUP,
			posX, posY, screenWidth, screenHeight, NULL, NULL, m_hinstance, NULL);
	}
	else
	{
		m_hwnd = CreateWindowEx(WS_EX_APPWINDOW, m_applicationName, m_applicationName,
			WS_OVERLAPPEDWINDOW,
			posX, posY, screenWidth, screenHeight, NULL, NULL, m_hinstance, NULL);
	}

	// 显示窗体并设置其为焦点.
	ShowWindow(m_hwnd, SW_SHOW);
	SetForegroundWindow(m_hwnd);
	SetFocus(m_hwnd);
	// 隐藏鼠标.
	//ShowCursor(false);

}

void XWindow::runWindows()
{
	MSG msg;
	// 初始化消息结构.
	ZeroMemory(&msg, sizeof(MSG));
	// 循环进行消息处理
	while(!Xexit)
	{
		// 处理windows消息.
		if(PeekMessage(&msg, NULL, 0, 0, PM_REMOVE))
		{
			TranslateMessage(&msg);
			DispatchMessage(&msg);
		}
		// 接收到WM_QUIT消息，退出程序.
		if(msg.message == WM_QUIT)
		{
			Xexit=true;
		}
		else
		{
			//渲染
			Xexit=!frame();
		}

	}
	return;
}
LRESULT CALLBACK WndProc(HWND hwnd, UINT umessage, WPARAM wparam, LPARAM lparam)
{
	switch(umessage)
	{

		// 窗体销毁消息.
	case WM_DESTROY:
	case WM_CLOSE:
		{
			PostQuitMessage(0);
			return 0;
		}
		break;
		//MessageHandle过程处理其他全部消息.
	default:
		{
			return appXWindow->MessageHandler(hwnd, umessage, wparam, lparam);
		}
		break;
	} 

}

LRESULT CALLBACK XWindow::MessageHandler(HWND hwnd, UINT umsg, WPARAM wparam, LPARAM lparam)
{

	switch(umsg)
	{
		// 检測按键消息.
	case WM_KEYDOWN:
		x_input->keyDown(wparam);
	    break;
	case WM_KEYUP:
		x_input->keyUp(wparam);
		break;
		//不论什么其他消息发送到windows缺省处理.
	default:
		{
			return DefWindowProc(hwnd, umsg, wparam, lparam);
		}
	}
	return 0;
}
void XWindow::closeWindows()
{
	//显示光标.
	//ShowCursor(true);
	// 恢复默认显示设置.
	if(fullScreen)
	{
		ChangeDisplaySettings(NULL, 0);
	}
	//释放窗体句柄.
	DestroyWindow(m_hwnd);
	m_hwnd = NULL;
	// 释放应用程序实例.
	UnregisterClass(m_applicationName, m_hinstance);
	m_hinstance = NULL;
	appXWindow=NULL;
	return;
}

XInput.h

#pragma once
class XInput
{
public:
	void init();
	void keyDown(unsigned int);
	void keyUp(unsigned int);
	bool isKeyDown(unsigned int);
private:
	bool x_keys[256];

};
void XInput::init()
{
	int i;

	// 初始全部的键都是非按下状态.
	for(i=0; i<256; i++)
	{
		x_keys[i] = false;
	}

	return;
}
void XInput::keyDown(unsigned int input)
{
	//键被按下.
	x_keys[input] = true;
	return;
}
void XInput::keyUp(unsigned int input)
{
	//键被按下.
	x_keys[input] = false;
	return;
}
bool XInput::isKeyDown(unsigned int key)
{
	// 推断键是否被按下？
	return x_keys[key];
}

XMain.cpp

#include "XWindow.h"
//入口
int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, PSTR pScmdline, int iCmdshow)
{

	XWindow *xwindow=new XWindow;
	xwindow->init(); //初始化
	xwindow->close();
	delete xwindow;
	return 0;
}

XD3Device.h

</pre><pre name="code" class="cpp">#pragma once
#pragma comment(lib, "dxgi.lib")
#pragma comment(lib, "d3d11.lib")
#pragma comment(lib, "d3dx11.lib")
#pragma comment(lib, "d3dx10.lib")
#include <dxgi.h>
#include <d3dcommon.h>
#include <d3d11.h>
#include <d3dx10math.h>
#include <xnamath.h>
class XD3Device
{
public:
	XD3Device();
	//3D设备全部初始化
	bool init(int, int, bool, HWND, bool, float, float);
	//关闭设备
	void close();
	//開始渲染设备
	void begin(float, float, float, float);
	//显示到前景
	void end();

public:
	bool m_vsync_enabled; //是否启用垂直同步
	IDXGISwapChain* m_swapChain; //交换链对象
	ID3D11Device* m_device;  //设备对象
	ID3D11DeviceContext* m_deviceContext; //设备上下文对象
	ID3D11RenderTargetView* m_renderTargetView; //渲染目标视图
	ID3D11Texture2D* m_depthStencilBuffer; //深度模板缓冲
	ID3D11DepthStencilState* m_depthStencilState; //深度磨成状态
	ID3D11DepthStencilView* m_depthStencilView; //深度目标视图
	ID3D11RasterizerState* m_rasterState; //光栅化状态
	D3DXMATRIX m_projectionMatrix; //投影矩阵
	D3DXMATRIX m_worldMatrix;//世界坐标系矩阵
	D3DXMATRIX m_orthoMatrix;//正交投影矩阵
};
void XD3Device::begin(float red, float green, float blue, float alpha)
{
	float color[]={red,green,blue,alpha};
	//清除后缓冲.
	m_deviceContext->ClearRenderTargetView(m_renderTargetView, color);

	//清除深度缓冲.
	m_deviceContext->ClearDepthStencilView(m_depthStencilView, D3D11_CLEAR_DEPTH, 1.0f, 0);

}
void XD3Device::end()
{
	//渲染完毕后。把后缓冲内容present到前缓冲
	if(m_vsync_enabled)
	{
		// 锁定屏幕刷新率.
		m_swapChain->Present(1, 0);
	}
	else
	{
		// 尽可能快的present后缓冲.
		m_swapChain->Present(0, 0);
	}

}
void XD3Device::close()
{
	// 释放交换链资源前。先设置为窗体模式，否则可能会产生异常.
	if(m_swapChain)
	{
		m_swapChain->SetFullscreenState(false, NULL);
	}

	if(m_rasterState)
	{
		m_rasterState->Release();
		m_rasterState = 0;
	}

	if(m_depthStencilView)
	{
		m_depthStencilView->Release();
		m_depthStencilView = 0;
	}

	if(m_depthStencilState)
	{
		m_depthStencilState->Release();
		m_depthStencilState = 0;
	}

	if(m_depthStencilBuffer)
	{
		m_depthStencilBuffer->Release();
		m_depthStencilBuffer = 0;
	}

	if(m_renderTargetView)
	{
		m_renderTargetView->Release();
		m_renderTargetView = 0;
	}

	if(m_deviceContext)
	{
		m_deviceContext->Release();
		m_deviceContext = 0;
	}

	if(m_device)
	{
		m_device->Release();
		m_device = 0;
	}

	if(m_swapChain)
	{
		m_swapChain->Release();
		m_swapChain = 0;
	}

}
XD3Device::XD3Device()
{
	m_swapChain = 0;
	m_device = 0;
	m_deviceContext = 0;
	m_renderTargetView = 0;
	m_depthStencilBuffer = 0;
	m_depthStencilState = 0;
	m_depthStencilView = 0;
	m_rasterState = 0;
}
//Initialize函数包括完毕D3D设置的全部代码。
bool XD3Device::init(int screenWidth, int screenHeight, bool vsync, HWND hwnd, bool fullscreen,
						  float screenDepth, float screenNear)
{
	HRESULT result;
	IDXGIFactory* factory;
	IDXGIAdapter* adapter;
	IDXGIOutput* adapterOutput;
	unsigned int numModes, i, stringLength;
	DXGI_MODE_DESC* displayModeList;
	DXGI_ADAPTER_DESC adapterDesc;
	int error;
	DXGI_SWAP_CHAIN_DESC swapChainDesc;
	D3D_FEATURE_LEVEL featureLevel;
	ID3D11Texture2D* backBufferPtr;
	D3D11_TEXTURE2D_DESC depthBufferDesc;
	D3D11_DEPTH_STENCIL_DESC depthStencilDesc;
	D3D11_DEPTH_STENCIL_VIEW_DESC depthStencilViewDesc;
	D3D11_RASTERIZER_DESC rasterDesc;
	D3D11_VIEWPORT viewport;
	float fieldOfView, screenAspect;

	// 保存垂直同步设置
	m_vsync_enabled = vsync;

	// 初始化交换链描写叙述
	ZeroMemory(&swapChainDesc, sizeof(swapChainDesc));
	//MessageBox(hwnd, L"Could 2", L"Error", MB_OK);
	// 用1个后缓冲
	swapChainDesc.BufferCount = 1;

	//帧缓冲的大小和应用程序窗体大小相等.
	swapChainDesc.BufferDesc.Width = screenWidth;
	swapChainDesc.BufferDesc.Height = screenHeight;

	// 后缓冲的surface的格式为DXGI_FORMAT_R8G8B8A8_UNORM.
	// surface的每一个像素用4个无符号的8bit[映射到0-1]来表示。

NORM表示归一化。
	swapChainDesc.BufferDesc.Format = DXGI_FORMAT_R8G8B8A8_UNORM;

	// 假设使用垂直同步，设置后缓冲的刷新率。.
	//刷新率就是一秒钟把后缓冲内容在屏幕上画出的次数。

//假设开启垂直同步，则锁定刷新率，则fps是固定的
	if(m_vsync_enabled)
	{
		swapChainDesc.BufferDesc.RefreshRate.Numerator = 60;
		swapChainDesc.BufferDesc.RefreshRate.Denominator = 1;
	}
	else
	{
		swapChainDesc.BufferDesc.RefreshRate.Numerator = 0;
		swapChainDesc.BufferDesc.RefreshRate.Denominator = 1;
	}

	// 设置后缓冲的用途
	// 我们的渲染目标缓冲为后缓冲。
	swapChainDesc.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT;

	// 后缓冲输出的窗体句柄.
	swapChainDesc.OutputWindow = hwnd;

	// 不使用多重採样
	swapChainDesc.SampleDesc.Count = 1;
	swapChainDesc.SampleDesc.Quality = 0;

	// 设置全屏或者窗体模式.
	if(fullscreen)
	{
		swapChainDesc.Windowed = false;
	}
	else
	{
		swapChainDesc.Windowed = true;
	}
	//MessageBox(hwnd, L"Could 1", L"Error", MB_OK);
	// 设定扫描线ordering以及缩放为unspecified.
	swapChainDesc.BufferDesc.ScanlineOrdering = DXGI_MODE_SCANLINE_ORDER_UNSPECIFIED;
	swapChainDesc.BufferDesc.Scaling = DXGI_MODE_SCALING_UNSPECIFIED;

	// 后缓冲内容呈现到屏幕后。放弃其内容
	swapChainDesc.SwapEffect = DXGI_SWAP_EFFECT_DISCARD;

	//不设置标志
	swapChainDesc.Flags = 0;

	// 设置feature level为D3D11
	// 假设显卡不支持D3D11,我们可以通过设置这个參数，使用D3D10,或者9.
	//featureLevel = D3D_FEATURE_LEVEL_10_1;
	D3D_FEATURE_LEVEL featureLevels[] =
	{
		D3D_FEATURE_LEVEL_11_0,
		D3D_FEATURE_LEVEL_10_1,
		D3D_FEATURE_LEVEL_10_0,
	};
	UINT numFeatureLevels = ARRAYSIZE( featureLevels );
	// 创建交换链，设备以及设备上下文.
	result = D3D11CreateDeviceAndSwapChain(NULL, D3D_DRIVER_TYPE_HARDWARE, NULL, 0, featureLevels, numFeatureLevels,
		D3D11_SDK_VERSION, &swapChainDesc, &m_swapChain, &m_device, NULL, &m_deviceContext);
	//MessageBox(hwnd, L"Could 1", L"Error", MB_OK);
	if(FAILED(result))
	{
		return false;
	}

	// 得到交换链中的后缓冲指针.
	result = m_swapChain->GetBuffer(0, __uuidof(ID3D11Texture2D), (LPVOID*)&backBufferPtr);
	if(FAILED(result))
	{
		return false;
	}

	// 用后缓冲创建渲染目标视图.
	result = m_device->CreateRenderTargetView(backBufferPtr, NULL, &m_renderTargetView);
	if(FAILED(result))
	{
		return false;
	}

	//释放后缓冲.(引用计数减1)
	backBufferPtr->Release();
	backBufferPtr = 0;

	// 初始化深度缓冲描写叙述.
	ZeroMemory(&depthBufferDesc, sizeof(depthBufferDesc));

	//设置深度缓冲描写叙述
	depthBufferDesc.Width = screenWidth;
	depthBufferDesc.Height = screenHeight;
	depthBufferDesc.MipLevels = 1;//对于深度缓冲为1
	depthBufferDesc.ArraySize = 1;//对于深度缓冲为1。对于纹理，这2个參数有很多其它用途
	depthBufferDesc.Format = DXGI_FORMAT_D24_UNORM_S8_UINT;
	depthBufferDesc.SampleDesc.Count = 1;
	depthBufferDesc.SampleDesc.Quality = 0;
	depthBufferDesc.Usage = D3D11_USAGE_DEFAULT;
	depthBufferDesc.BindFlags = D3D11_BIND_DEPTH_STENCIL;
	depthBufferDesc.CPUAccessFlags = 0;
	depthBufferDesc.MiscFlags = 0;

	// 创建深度缓冲.
	result = m_device->CreateTexture2D(&depthBufferDesc, NULL, &m_depthStencilBuffer);
	if(FAILED(result))
	{
		return false;

	}

	// 初始化深度模版状态描写叙述.
	ZeroMemory(&depthStencilDesc, sizeof(depthStencilDesc));

	// 设置深度模版状态描写叙述.
	depthStencilDesc.DepthEnable = true;
	depthStencilDesc.DepthWriteMask = D3D11_DEPTH_WRITE_MASK_ALL;//D3D11_DEPTH_WRITE_MASK_ZERO禁止写深度缓冲
	depthStencilDesc.DepthFunc = D3D11_COMPARISON_LESS;

	depthStencilDesc.StencilEnable = true;
	depthStencilDesc.StencilReadMask = 0xFF;
	depthStencilDesc.StencilWriteMask = 0xFF;

	// 对于front face 像素使用的模版操作操作.
	depthStencilDesc.FrontFace.StencilFailOp = D3D11_STENCIL_OP_KEEP;
	depthStencilDesc.FrontFace.StencilDepthFailOp = D3D11_STENCIL_OP_INCR;
	depthStencilDesc.FrontFace.StencilPassOp = D3D11_STENCIL_OP_KEEP;
	depthStencilDesc.FrontFace.StencilFunc = D3D11_COMPARISON_ALWAYS;

	// 对于back face像素使用的模版操作模式.
	depthStencilDesc.BackFace.StencilFailOp = D3D11_STENCIL_OP_KEEP;
	depthStencilDesc.BackFace.StencilDepthFailOp = D3D11_STENCIL_OP_DECR;
	depthStencilDesc.BackFace.StencilPassOp = D3D11_STENCIL_OP_KEEP;
	depthStencilDesc.BackFace.StencilFunc = D3D11_COMPARISON_ALWAYS;

	// 创建深度模版状态，使其生效
	result = m_device->CreateDepthStencilState(&depthStencilDesc, &m_depthStencilState);
	if(FAILED(result))
	{
		return false;

	}

	// 设置深度模版状态.
	m_deviceContext->OMSetDepthStencilState(m_depthStencilState, 1);

	// 初始化深度模版视图.
	ZeroMemory(&depthStencilViewDesc, sizeof(depthStencilViewDesc));

	// 设置深度模版视图描写叙述.
	depthStencilViewDesc.Format = DXGI_FORMAT_D24_UNORM_S8_UINT;
	depthStencilViewDesc.ViewDimension = D3D11_DSV_DIMENSION_TEXTURE2D;
	depthStencilViewDesc.Texture2D.MipSlice = 0;

	// 创建深度模版视图.
	result = m_device->CreateDepthStencilView(m_depthStencilBuffer, &depthStencilViewDesc, &m_depthStencilView);
	if(FAILED(result))
	{
		return false;
	}

	// 绑定渲染目标视图和深度缓冲到渲染管线.
	m_deviceContext->OMSetRenderTargets(1, &m_renderTargetView, m_depthStencilView);

	// 设置光栅化描写叙述，指定多边形怎样被渲染.
	rasterDesc.AntialiasedLineEnable = false;
	rasterDesc.CullMode = D3D11_CULL_BACK;
	rasterDesc.DepthBias = 0;
	rasterDesc.DepthBiasClamp = 0.0f;
	rasterDesc.DepthClipEnable = true;
	rasterDesc.FillMode = D3D11_FILL_SOLID;
	rasterDesc.FrontCounterClockwise = false;
	rasterDesc.MultisampleEnable = false;
	rasterDesc.ScissorEnable = false;
	rasterDesc.SlopeScaledDepthBias = 0.0f;

	// 创建光栅化状态
	result = m_device->CreateRasterizerState(&rasterDesc, &m_rasterState);
	if(FAILED(result))
	{
		return false;
	}

	//设置光栅化状态，使其生效
	m_deviceContext->RSSetState(m_rasterState);

	// 设置视口，显示全部后缓冲内容
	viewport.Width = (float)screenWidth;
	viewport.Height = (float)screenHeight;
	viewport.MinDepth = 0.0f;
	viewport.MaxDepth = 1.0f;
	viewport.TopLeftX = 0.0f;
	viewport.TopLeftY = 0.0f;

	// 创建视口
	m_deviceContext->RSSetViewports(1, &viewport);

	// 设置透视投影矩阵
	fieldOfView = (float)D3DX_PI / 4.0f;
	screenAspect = (float)screenWidth / (float)screenHeight;

	// 创建透视投影矩阵.
	D3DXMatrixPerspectiveFovLH(&m_projectionMatrix, fieldOfView, screenAspect, screenNear, screenDepth);

	//初始化world矩阵为单位矩阵.
	//该矩阵实现局部坐标到世界坐标的转换
	D3DXMatrixIdentity(&m_worldMatrix);

	// 创建正交投影矩阵，主要用来实施2D渲染.
	D3DXMatrixOrthoLH(&m_orthoMatrix, (float)screenWidth, (float)screenHeight, screenNear, screenDepth);

	return true;

}