#*****************************************************************
# Neo4j configuration
#
# For more details and a complete list of settings, please see
# https://neo4j.com/docs/operations-manual/current/reference/configuration-settings/
#*****************************************************************

# The name of the database to mount
dbms.active_database=hiveage.db

# Paths of directories in the installation.
dbms.directories.data=/data/neo4j_data/hive_lineage/hiveage.db
dbms.directories.logs=/log/neo4j_log/hive_lineage
# use default dir's parameter.
dbms.directories.certificates=certificates
dbms.directories.lib=lib
dbms.directories.run=run
dbms.directories.plugins=plugins

# This setting constrains all `LOAD CSV` import files to be under the `import` directory. Remove or comment it out to
# allow files to be loaded from anywhere in the filesystem; this introduces possible security problems. See the
# `LOAD CSV` section of the manual for details.
dbms.directories.import=import

# Whether requests to Neo4j are authenticated.
# To disable authentication, uncomment this line
dbms.security.auth_enabled=true

# Enable this to be able to upgrade a store from an older version.
dbms.allow_upgrade=true

# Java Heap Size: by default the Java heap size is dynamically
# calculated based on available system resources.
# Uncomment these lines to set specific initial and maximum
# heap size.
dbms.memory.heap.initial_size=8G
dbms.memory.heap.max_size=8G

# The amount of memory to use for mapping the store files, in bytes (or
# kilobytes with the 'k' suffix, megabytes with 'm' and gigabytes with 'g').
# If Neo4j is running on a dedicated server, then it is generally recommended
# to leave about 2-4 gigabytes for the operating system, give the JVM enough
# heap to hold all your transaction state and query context, and then leave the
# rest for the page cache.
# The default page cache memory assumes the machine is dedicated to running
# Neo4j, and is heuristically set to 50% of RAM minus the max Java heap size.
dbms.memory.pagecache.size=20G

#*****************************************************************
# Network connector configuration
#*****************************************************************

# With default configuration Neo4j only accepts local connections.
# To accept non-local connections, uncomment this line:
dbms.connectors.default_listen_address=0.0.0.0

# You can also choose a specific network interface, and configure a non-default
# port for each connector, by setting their individual listen_address.

# The address at which this server can be reached by its clients. This may be the server's IP address or DNS name, or
# it may be the address of a reverse proxy which sits in front of the server. This setting may be overridden for
# individual connectors below.
dbms.connectors.default_advertised_address=0.0.0.0

# You can also choose a specific advertised hostname or IP address, and
# configure an advertised port for each connector, by setting their
# individual advertised_address.

# Bolt connector
dbms.connector.bolt.enabled=true
dbms.connector.bolt.tls_level=OPTIONAL
dbms.connector.bolt.listen_address=:8687

# HTTP Connector. There must be exactly one HTTP connector.
dbms.connector.http.enabled=true
dbms.connector.http.listen_address=:8474

# HTTPS Connector. There can be zero or one HTTPS connectors.
dbms.connector.https.enabled=true
dbms.connector.https.listen_address=:8473

# Number of Neo4j worker threads.
dbms.threads.worker_count=20000

#*****************************************************************
# SSL system configuration
#*****************************************************************

# Names of the SSL policies to be used for the respective components.

# The legacy policy is a special policy which is not defined in
# the policy configuration section, but rather derives from
# dbms.directories.certificates and associated files
# (by default: neo4j.key and neo4j.cert). Its use will be deprecated.

# The policies to be used for connectors.
#
# N.B: Note that a connector must be configured to support/require
# SSL/TLS for the policy to actually be utilized.
#
# see: dbms.connector.*.tls_level

#bolt.ssl_policy=legacy
#https.ssl_policy=legacy

#*****************************************************************
# SSL policy configuration
#*****************************************************************

# Each policy is configured under a separate namespace, e.g.
# dbms.ssl.policy.<policyname>.*
#
# The example settings below are for a new policy named 'default'.

# The base directory for cryptographic objects. Each policy will by
# default look for its associated objects (keys, certificates, ...)
# under the base directory.
#
# Every such setting can be overriden using a full path to
# the respective object, but every policy will by default look
# for cryptographic objects in its base location.
#
# Mandatory setting

#dbms.ssl.policy.default.base_directory=certificates/default

# Allows the generation of a fresh private key and a self-signed
# certificate if none are found in the expected locations. It is
# recommended to turn this off again after keys have been generated.
#
# Keys should in general be generated and distributed offline
# by a trusted certificate authority (CA) and not by utilizing
# this mode.

#dbms.ssl.policy.default.allow_key_generation=false

# Enabling this makes it so that this policy ignores the contents
# of the trusted_dir and simply resorts to trusting everything.
#
# Use of this mode is discouraged. It would offer encryption but no security.

#dbms.ssl.policy.default.trust_all=false

# The private key for the default SSL policy. By default a file
# named private.key is expected under the base directory of the policy.
# It is mandatory that a key can be found or generated.

#dbms.ssl.policy.default.private_key=

# The private key for the default SSL policy. By default a file
# named public.crt is expected under the base directory of the policy.
# It is mandatory that a certificate can be found or generated.

#dbms.ssl.policy.default.public_certificate=

# The certificates of trusted parties. By default a directory named
# 'trusted' is expected under the base directory of the policy. It is
# mandatory to create the directory so that it exists, because it cannot
# be auto-created (for security purposes).
#
# To enforce client authentication client_auth must be set to 'require'!

#dbms.ssl.policy.default.trusted_dir=

# Client authentication setting. Values: none, optional, require
# The default is to require client authentication.
#
# Servers are always authenticated unless explicitly overridden
# using the trust_all setting. In a mutual authentication setup this
# should be kept at the default of require and trusted certificates
# must be installed in the trusted_dir.

#dbms.ssl.policy.default.client_auth=require

# A comma-separated list of allowed TLS versions.
# By default TLSv1, TLSv1.1 and TLSv1.2 are allowed.

#dbms.ssl.policy.default.tls_versions=

# A comma-separated list of allowed ciphers.
# The default ciphers are the defaults of the JVM platform.

#dbms.ssl.policy.default.ciphers=

#*****************************************************************
# Logging configuration
#*****************************************************************

# To enable HTTP logging, uncomment this line
dbms.logs.http.enabled=true

# Number of HTTP logs to keep.
dbms.logs.http.rotation.keep_number=5

# Size of each HTTP log that is kept.
dbms.logs.http.rotation.size=100m

# To enable GC Logging, uncomment this line
dbms.logs.gc.enabled=true

# GC Logging Options
# see http://docs.oracle.com/cd/E19957-01/819-0084-10/pt_tuningjava.html#wp57013 for more information.
dbms.logs.gc.options=-XX:+PrintGCDetails -XX:+PrintGCDateStamps -XX:+PrintGCApplicationStoppedTime -XX:+PrintPromotionFailure -XX:+PrintTenuringDistribution

# Number of GC logs to keep.
dbms.logs.gc.rotation.keep_number=5

# Size of each GC log that is kept.
dbms.logs.gc.rotation.size=100m

# Size threshold for rotation of the debug log. If set to zero then no rotation will occur. Accepts a binary suffix "k",
# "m" or "g".
dbms.logs.debug.rotation.size=100m

# Maximum number of history files for the internal log.
dbms.logs.debug.rotation.keep_number=7

#*****************************************************************
# Miscellaneous configuration

#*****************************************************************

# Enable this to specify a parser other than the default one.
#cypher.default_language_version=3.0

# Determines if Cypher will allow using file URLs when loading data using
# `LOAD CSV`. Setting this value to `false` will cause Neo4j to fail `LOAD CSV`
# clauses that load data from the file system.
dbms.security.allow_csv_import_from_file_urls=true

# Retention policy for transaction logs needed to perform recovery and backups.
dbms.tx_log.rotation.retention_policy=7 days

# Enable a remote shell server which Neo4j Shell clients can log in to.
dbms.shell.enabled=true
# The network interface IP the shell will listen on (use 0.0.0.0 for all interfaces).
dbms.shell.host=127.0.0.1
# The port the shell will listen on, default is 1337.
dbms.shell.port=2337

# Only allow read operations from this Neo4j instance. This mode still requires
# write access to the directory for lock purposes.
dbms.read_only=false

# Comma separated list of JAX-RS packages containing JAX-RS resources, one
# package name for each mountpoint. The listed package names will be loaded
# under the mountpoints specified. Uncomment this line to mount the
# org.neo4j.examples.server.unmanaged.HelloWorldResource.java from
# neo4j-server-examples under /examples/unmanaged, resulting in a final URL of
# http://localhost:7474/examples/unmanaged/helloworld/{nodeId}
#dbms.unmanaged_extension_classes=org.neo4j.examples.server.unmanaged=/examples/unmanaged

#********************************************************************
# JVM Parameters
#********************************************************************

# G1GC generally strikes a good balance between throughput and tail
# latency, without too much tuning.
dbms.jvm.additional=-XX:+UseG1GC

# Have common exceptions keep producing stack traces, so they can be
# debugged regardless of how often logs are rotated.
dbms.jvm.additional=-XX:-OmitStackTraceInFastThrow

# Make sure that `initmemory` is not only allocated, but committed to
# the process, before starting the database. This reduces memory
# fragmentation, increasing the effectiveness of transparent huge
# pages. It also reduces the possibility of seeing performance drop
# due to heap-growing GC events, where a decrease in available page
# cache leads to an increase in mean IO response time.
# Try reducing the heap memory, if this flag degrades performance.
dbms.jvm.additional=-XX:+AlwaysPreTouch

# Trust that non-static final fields are really final.
# This allows more optimizations and improves overall performance.
# NOTE: Disable this if you use embedded mode, or have extensions or dependencies that may use reflection or
# serialization to change the value of final fields!
dbms.jvm.additional=-XX:+UnlockExperimentalVMOptions
dbms.jvm.additional=-XX:+TrustFinalNonStaticFields

# Disable explicit garbage collection, which is occasionally invoked by the JDK itself.
dbms.jvm.additional=-XX:+DisableExplicitGC

# Remote JMX monitoring, uncomment and adjust the following lines as needed. Absolute paths to jmx.access and
# jmx.password files are required.
# Also make sure to update the jmx.access and jmx.password files with appropriate permission roles and passwords,
# the shipped configuration contains only a read only role called 'monitor' with password 'Neo4j'.
# For more details, see: http://download.oracle.com/javase/8/docs/technotes/guides/management/agent.html
# On Unix based systems the jmx.password file needs to be owned by the user that will run the server,
# and have permissions set to 0600.
# For details on setting these file permissions on Windows see:
# http://docs.oracle.com/javase/8/docs/technotes/guides/management/security-windows.html
#dbms.jvm.additional=-Dcom.sun.management.jmxremote.port=3637
#dbms.jvm.additional=-Dcom.sun.management.jmxremote.authenticate=true
#dbms.jvm.additional=-Dcom.sun.management.jmxremote.ssl=false
#dbms.jvm.additional=-Dcom.sun.management.jmxremote.password.file=/absolute/path/to/conf/jmx.password
#dbms.jvm.additional=-Dcom.sun.management.jmxremote.access.file=/absolute/path/to/conf/jmx.access

# Some systems cannot discover host name automatically, and need this line configured:
#dbms.jvm.additional=-Djava.rmi.server.hostname=$THE_NEO4J_SERVER_HOSTNAME

# Expand Diffie Hellman (DH) key size from default 1024 to 2048 for DH-RSA cipher suites used in server TLS handshakes.
# This is to protect the server from any potential passive eavesdropping.
dbms.jvm.additional=-Djdk.tls.ephemeralDHKeySize=2048

# This mitigates a DDoS vector.
dbms.jvm.additional=-Djdk.tls.rejectClientInitiatedRenegotiation=true

#********************************************************************
# Wrapper Windows NT/2000/XP Service Properties
#********************************************************************
# WARNING - Do not modify any of these properties when an application
# using this configuration file has been installed as a service.
# Please uninstall the service before modifying this section. The
# service can then be reinstalled.

# Name of the service
dbms.windows_service_name=neo4j

#********************************************************************
# Other Neo4j system properties
#********************************************************************
dbms.jvm.additional=-Dunsupported.dbms.udc.source=tarball

Neo4j社区版配置文件的更多相关文章

  1. IntelliJ IDEA(社区版)学习记录

    一.下载 地址:官网下载地址 二.安装 运行安装程序,一路下一步.注意选择安装路径. 三.基本概念 project:相当于donet下的解决方案 module:相当于donet下的项目工程 四.IDE ...

  2. SequoiaDB(巨杉数据库)(社区版)安装配置使用图解

    SequoaiDB是一款新型企业级分布式非关系型数据库,提供了基于PC服务器的大规模集群数据平台.作为全球第一家企业级文档式 NoSQL分布式数据库,为用户提供了一个高扩展性.高可用性.高性能.易维护 ...

  3. 搭建基于Docker社区版的Kubernetes本地集群

    Kubernetes的本地集群搭建是一件颇费苦心的活,网上有各种参考资源,由于版本和容器的不断发展,搭建的方式也是各不相同,这里基于Docker CE的18.09.0版本,在Mac OS.Win10下 ...

  4. MySQL社区版升级到Percona Server

    出于磁盘空间的考虑,在调研以后把磁盘空间紧张的库的引擎改为tokudb,(在改为tokudb引擎之前是innodb引擎,已经压缩过,但空间还是紧张)关于tokudb的优势各位自行查阅相关资料.要启用t ...

  5. 【Git】 GitLab服务器社区版安装与配置

    GitLab简介 GitLab 是一个用于仓库管理系统的开源项目,使用Git作为代码管理工具,并在此基础上搭建起来的web服务 GitLab系统架构 当~git在图片中引用时,它表示git用户的主目录 ...

  6. 在自己的服务器上部署 GitLab 社区版

    GitLab 简介 因为我的个人网站 restran.net 已经启用,博客园的内容已经不再更新.这篇文章是在 Gitlab 7.4 的环境下配置的,相关内容可能已经过时. 后续做了一次迁移,将 Gi ...

  7. Ubuntu 16.04 (官方命令行)安装MongoDB 3.6.2(社区版)

    概述 使用本教程从 .deb 包在LTS Ubuntu Linux系统上安装MongoDB Community Edition. 虽然Ubuntu包含自己的MongoDB包,但官方的MongoDB社区 ...

  8. Centos 7 搭建蓝鲸3.1.5社区版

    第一次搭建蓝鲸平台,参考了蓝鲸社区的官方搭建文档. 友情链接:蓝鲸智云社区版V3.1用户手册 搭建时遇到了不少的坑,这里做一个详细的安装梳理 主机硬件要求 官方的推荐如下: 我在公司测试环境搭建时机器 ...

  9. Centos 7 搭建蓝鲸V4.1.16社区版

    第一次搭建蓝鲸平台,参考了蓝鲸社区的官方搭建文档. 友情链接:蓝鲸智云社区版V4.1.16用户手册 搭建时遇到了不少的坑,这里做一个详细的安装梳理 主机硬件要求 官方的推荐如下: 在本地用VMware ...

随机推荐

  1. IntelliJ cannot log in to GitHub上传github报错解决

    重装系统,新装的Intellij IDEA上新建的项目上传github失败,报错: invalid authentication token ... 此处多为本地git用户的用户名/邮箱,与之前设置的 ...

  2. Hibernate 注解映射

    工作中遇到hibernate映射的一些问题,这里总结一下 (特别是测试时,许多数据并不能有效关联.所以@NotFound 很重要) 一,假设有2张表user,company 我们知道,一个用户属于一个 ...

  3. 洛谷P3690 Link Cut Tree (模板)

    Link Cut Tree 刚开始写了个指针版..调了一天然后放弃了.. 最后还是学了黄学长的板子!! #include <bits/stdc++.h> #define INF 0x3f3 ...

  4. ionic更改端口号

    —— 重新指定端口号为8888 serve [options] ............................... 启动本地服务器进行开发测试 dev/testing [--console ...

  5. 一种使用 emwin 绘制图片的方法

    @2018-12-10 [小记] 使用官方 <GUIBuilder.exe> 软件里的 Image 控件,注意格式为 .bmp,这种方式是将图片数据直接转为十六进制数据存储至静态区 具体使 ...

  6. pandas to_html

    如何将表格数据以图片的形式展现,主要目的则是为了防止爬虫. 为了解决这个问题,刚开始选择的是matplotlib.pyplot.table,但由于随着数据的字段长短不一,且matplotlib实际落地 ...

  7. hdu 2516(Fibonacci博弈博弈)

    题目链接:http://acm.hdu.edu.cn/showproblem.php?pid=2516 Problem Description 1堆石子有n个,两人轮流取.先取者第1次可以取任意多个, ...

  8. java 子类强转父类 父类强转子类

    Java 继承 继承就是子类继承父类的特征和行为,使得子类对象(实例)具有父类的实例域和方法,或子类从父类继承方法,使得子类具有父类相同的行为. Java 子类强转父类 父类引用指向子类对象: jav ...

  9. A1125. Chain the Ropes

    Given some segments of rope, you are supposed to chain them into one rope. Each time you may only fo ...

  10. [luogu1341][无序字母对]

    luogu1341 思路 欧拉回路和欧拉路的裸题,首先判断是否存在欧拉路或者欧拉回路.当且仅当途中每个点的度数都为偶数时,存在欧拉回路.当且仅当图中度数为奇数的点的个数为2时,存在欧拉路.如果存在欧拉 ...