All the Linux/C error codes are listed below.

I occasionally google C error codes, but always end up grepping through /usr/include to find the answer. To save myself, and a few others, some time in the future...

/usr/include/asm-generic/errno-base.h

 #ifndef _ASM_GENERIC_ERRNO_BASE_H
#define _ASM_GENERIC_ERRNO_BASE_H #define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Argument list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */ #endif

/usr/include/asm-generic/errno.h

 #ifndef _ASM_GENERIC_ERRNO_H
#define _ASM_GENERIC_ERRNO_H #include <asm-generic/errno-base.h> #define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */ #define EDEADLOCK EDEADLK #define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */ #define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#define ECANCELED 125 /* Operation Canceled */
#define ENOKEY 126 /* Required key not available */
#define EKEYEXPIRED 127 /* Key has expired */
#define EKEYREVOKED 128 /* Key has been revoked */
#define EKEYREJECTED 129 /* Key was rejected by service */ /* for robust mutexes */
#define EOWNERDEAD 130 /* Owner died */
#define ENOTRECOVERABLE 131 /* State not recoverable */ #endif

errno.h - C Error Codes in Linux的更多相关文章

  1. 标准库errno.h 查看错误代码编号,errno:4 与error:2

    log 里报错,errno:4   与errno:2 查了一下 errno.h   --------下文来自百度百科 errno 编辑 errno 是记录系统的最后一次错误代码.代码是一个int型的值 ...

  2. LINUX 内核代码 errno 错误代码提示 /include/asm/errno.h

    首先在自己的程序中#include<errno.h> 添加打印errno的语句 printf("errno is: %d\n",errno); 根据errno的值查错. ...

  3. linux下错误的捕获:errno(errno.h)和strerror(string.h)的使用

    参考:http://blog.csdn.net/starstar1992/article/details/52756387 linux下错误的捕获:errno和strerror的使用 经常在调用lin ...

  4. linux 下errno各个值的意义(转) errno.h

    strerror(errno):获取errno对应的错误 查看错误代码errno是调试程序的一个重要方法.当linux C api函数发生异常时,一般会将errno变量(需include errno. ...

  5. Linux系统中errno对应的中文意思 errno.h

    /usr/include/asm/errno.h #define EPERM 1 /* Operation not permitted */操作不允许 #define ENOENT 2 /* No s ...

  6. 安装docker报错:https://download.docker.com/linux/centos/7/i386/stable/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"

    如题,执行docker安装命令报错: [root@centos ~]# yum install docker-ce Loaded plugins: fastestmirror, security Se ...

  7. Windows Sockets Error Codes

    https://msdn.microsoft.com/en-us/library/windows/desktop/ms740668(v=vs.85).aspx Most Windows Sockets ...

  8. errno.h 错误码描述.

    描述:一般说的Linux源码的目录,默认是基于 /usr/include/ 的. 使用 char *strerror(int errnum); 函数打印错误代码的描述.我简单对比了一下,发现描述大体一 ...

  9. mysql: Error Codes and Messages

    Appendix B. Error Codes and MessagesTable of Contents B.1. Server Error Codes and MessagesB.2. Clien ...

随机推荐

  1. 如何三招帮你排查Linux中的硬件问题

    下列贴士帮助你更快速更轻松地为Linux中的硬件排查故障.许多不同的因素可能导致Linux硬件出现问题:在你开始尝试诊断之前,了解最常见的问题以及最有可能找到原因的环节是明智之举. Linux服务器在 ...

  2. 《OpenGL® ES™ 3.0 Programming Guide》读书笔记1 ----总览

    OpenGL ES 3.0 Graphics Pipeline OpenGL ES 3.0 Vertex Shader Transform feedback: Additionally, OpenGL ...

  3. C118+OSMCOMBB嗅探短信

    ubuntu系统:12.04.4, 下载地址:http://cdimage.ubuntu.com/releases/12.04.4/release/ 编译环境下载 : http://pan.baidu ...

  4. xpress for node 路由route几种实现方式

    路由实现方式和顺序第二种路由写法第三种路由写法最佳 http://blog.csdn.net/mociml/article/details/11137571# http://blog.fens.me/ ...

  5. asp.net集合类

    1.返回IEnumerable类型 protected void Page_Load(object sender, EventArgs e) { IEnumerable ie = AllGet(); ...

  6. 关于Windows勒索病毒以及445端口防护

    前两天,与这个周末,5月12日起,Onion.WNCRY两类敲诈者病毒变种在全国乃至全世界大范围内出现爆发态势,大量个人和企业.机构用户中招. 与以往不同的是,这次的新变种病毒添加了NSA(美国国家安 ...

  7. Go语言使用Beego的ORM插入Mysql后,时区不一致的解决方案

    一.解决方案: 方案一: orm.Debug = false orm.DefaultTimeLoc = time.UTC orm.RegisterDriver("mysql", o ...

  8. SDUT 1269-走迷宫(DFS打印路径)

    走迷宫 Time Limit: 1000ms   Memory limit: 65536K  有疑问?点这里^_^ 题目描写叙述 有一个m*n格的迷宫(表示有m行.n列),当中有可走的也有不可走的,假 ...

  9. [转]什么是 RPC?

    知乎上看到的一个解释,解释的太精炼太直接,忍不住在这记录一下. 知乎地址:https://www.zhihu.com/question/25536695 本地过程调用 RPC就是要像调用本地的函数一样 ...

  10. C++ 函数返回局部变量的std::move()的适用场景(转)

    作者:神奇先生链接:https://www.zhihu.com/question/57048704/answer/151446405来源:知乎著作权归作者所有.商业转载请联系作者获得授权,非商业转载请 ...