使用CentOS 7时发现使用iptables防火墙时提示错误Unit iptables.service failed to load,意思是防火墙运行启动失败了,那么要如何处理呢。
 

一直用CentOS 6 习惯了,一下没适应过来。防火墙配置后执行service iptables save 出现”Failed to restart iptables.service: Unit iptables.service failed to load: No such file or directory.”错误,在CentOS 7或RHEL 7或Fedora中防火墙由firewalld来管理,当然你可以还原传统的管理方式。或则使用新的命令进行管理。

假如采用传统请执行一下命令:

systemctl stop firewalld
systemctl mask firewalld

并且安装iptables-services:

yum install iptables-services
设置开机启动:

systemctl enable iptables

systemctl [stop|start|restart] iptables
#or
service iptables [stop|start|restart]

service iptables save
#or
/usr/libexec/iptables/iptables.init save

从上面的解决办法来看这个是防火墙没有启动了,iptables防火墙服务未启动导致的哦。

centos7安装iptables的更多相关文章

  1. CentOS7安装iptables防火墙

    CentOS7默认的防火墙不是iptables,而是firewalle. 安装iptable iptable-service #先检查是否安装了iptables service iptables st ...

  2. CentOS之——CentOS7安装iptables防火墙

    转载请注明出处:http://blog.csdn.net/l1028386804/article/details/50779761 CentOS7默认的防火墙不是iptables,而是firewall ...

  3. CentOS7安装配置iptables防火墙

    转载请注明出处:http://blog.csdn.net/l1028386804/article/details/50779761 CentOS7默认的防火墙不是iptables,而是firewall ...

  4. centos7上安装iptables

    centos7上安装iptables的步骤 注意:CentOS7默认的防火墙不是iptables,而是firewalle. 安装iptable iptable-service #安装iptables ...

  5. Centos7下安装iptables防火墙

    说明:centos7默认使用的firewalld防火墙,由于习惯使用iptables做防火墙,所以在安装好centos7系统后,会将默认的firewall关闭,并另安装iptables进行防火墙规则设 ...

  6. Linux CentOS7 安装配置 IPtables

    2021-08-11 1. 前言 防火墙其实就是实现 Linux 下访问控制功能的,分为硬件和软件的防火墙两种类型.无论在何网络中,防火墙工作的地方一定是网络的边缘.防火墙的策略.规则就是去定义防火墙 ...

  7. centos7 关闭firewall安装iptables并配置

    一.配置防火墙,开启80端口.3306端口 CentOS 7.0默认使用的是firewall作为防火墙,这里改为iptables防火墙. 1.关闭firewall: systemctl stop fi ...

  8. CentOS7.2 安装iptables

    1  先检查是否安装了iptables: service iptables status iptables  -L ls /etc/sysconfig/ 综上:命令报错,且 iptables不存在,那 ...

  9. entOS7安装iptables防火墙,试验未通过

    CentOS7默认的防火墙不是iptables,而是firewalle. 安装iptable iptable-service #先检查是否安装了iptables service iptables st ...

随机推荐

  1. 【python】string functions

    1.str.replace(word0,word1)  ##用word1替换str中所有的word0 >>> 'tea for too'.replace('too', 'two') ...

  2. Java 并发 —— volatile 关键字

    volatile 修饰变量等于向编译器传达如下两层含义: 保证了不同线程对这个变量进行操作时的可见性,即一个线程修改了某个变量的值,这新值对其他线程来说是立即可见的. 禁止进行指令重排序. volat ...

  3. Android设备管理器 DevicePolicyManager

    设备管理器有个特点,你注册了之后如果不解除注册就会难以卸载带有设备管理器的应用,目前4.3版本仍未提示用户如何卸载,maybe later. 在「设定-安全」你可以看见「设备管理器」,它提供一些高级功 ...

  4. zabbix proxy安装及使用

    首先我萌先理解下为什么要突然冒出zabbix proxy 它是一个代理,也就是agent与server的中间层,他会代替server收集agent的数据保存起来,然后推送给server,那么很明显,它 ...

  5. ZipHelper

    using ICSharpCode.SharpZipLib.Zip; using System.Collections.Generic; using System.IO; namespace WLYD ...

  6. SQLite win7

    https://blog.csdn.net/louislee92/article/details/50390000 vs2008利用sqlite A 添加sqlite3.h sqlite3.lib到工 ...

  7. java.lang.NoSuchMethodError: org.springframework.core.io.ResourceEditor错误

    一般是jar包冲突,或者某些jar包版本不同. 如上,spring其他包的版本均为4.2.5,而spring-webmvc的jar包为1.2.6版本,造成版本冲突. 把该包版本改为4.2.5,宣告成功 ...

  8. 一、使用 BeautifulSoup抓取网页信息信息

    一.解析网页信息 from bs4 import BeautifulSoup with open('C:/Users/michael/Desktop/Plan-for-combating-master ...

  9. 利用python数据分析panda学习笔记之DataFrame

    2 DataFrame a:通过传入一个等长的列表构成DataFrame 自动加上索引 data={'state':['ohio','ohio','ohio','Nevada','Nevada'], ...

  10. Flutter实战视频-移动电商-37.路由_Fluro引入和商品详细页建立

    37.路由_Fluro引入和商品详细页建立 https://github.com/theyakka/fluro pages/details_page.dart新建页面 使用路由 先添加路由插件的引用 ...