NX二次开发-创建圆弧(圆心-半径)UF_CURVE_create_arc_center_radius

     NX9+VS2012

     #include <uf.h>
     #include <uf_curve.h>
     #include <uf_modl.h>

     UF_initialize();

     //圆心点
     double p1[] = {0.0, 0.0, 0.0};
     tag_t CenterTag = NULL_TAG;
     UF_CURVE_create_point(p1, &CenterTag);

     //辅助点
     double HelpPoint[] = {100.0, 0.0, 0.0};
     tag_t HelpPointTag = NULL_TAG;
     UF_CURVE_create_point(HelpPoint, &HelpPointTag);

     //类型
     UF_CURVE_limit_t limit[];
     UF_CURVE_limit_p_t pLimit[] = { &limit[], &limit[] };
     limit[].limit_type = UF_CURVE_limit_value;
     limit[].value = ;//按值
     limit[].limit_type = UF_CURVE_limit_value;
     limit[].value = ;//按值

     //创建XZ基准平面,用来放圆弧
     double PlanePoint[] = { 0.0, 0.0, 0.0 };
     double Direction1[] = { 0.0, 1.0, 0.0 };
     tag_t DplaneTag = NULL_TAG;
     UF_MODL_create_fixed_dplane(PlanePoint, Direction1, &DplaneTag);

     tag_t ArcTag = NULL_TAG;
     UF_CURVE_create_arc_center_radius(CenterTag, , HelpPointTag, pLimit, DplaneTag, FALSE, &ArcTag);

     UF_terminate();