一、elastic search的安装与配置

1、安装Java 并且配置JAVA_HOME环境变量。

2、下载elasticsearch，下载地址：https://www.elastic.co/downloads/elasticsearch。博主下载时最新版为6.3.2，下面所有都是基于6.3.2进行的测试。选择下载zip文件，这样解压即可使用。

3.解压后修改配置文件。进入到elasticsearch所在目录下面的config下面，修改elasticsearch.yml文件，修改内容如下：

(1)、在文件结尾加入如下代码（key和值之间必须要有 空格）

　　

http.cors.enabled: true

http.cors.allow-origin: "*"

node.master: true

(2)、在文件中找到network.host，将其值改为 127.0.0.1或者本机ip。

(3)、取消 http.port 、cluster.name 、node.name 三个值前面的注释（去掉 #）。

# ======================== Elasticsearch Configuration =========================

#

# NOTE: Elasticsearch comes with reasonable defaults for most settings.

#       Before you set out to tweak and tune the configuration, make sure you

#       understand what are you trying to accomplish and the consequences.

#

# The primary way of configuring a node is via this file. This template lists

# the most important settings you may want to configure for a production cluster.

#

# Please consult the documentation for further information on configuration options:

# https://www.elastic.co/guide/en/elasticsearch/reference/index.html

#

# ---------------------------------- Cluster -----------------------------------

#

# Use a descriptive name for your cluster:

#

cluster.name: my-application

#

# ------------------------------------ Node ------------------------------------

#

# Use a descriptive name for the node:

#

node.name: node-1

#

# Add custom attributes to the node:

#

#node.attr.rack: r1

#

# ----------------------------------- Paths ------------------------------------

#

# Path to directory where to store the data (separate multiple locations by comma):

#

#path.data: /path/to/data

#

# Path to log files:

#

#path.logs: /path/to/logs

#

# ----------------------------------- Memory -----------------------------------

#

# Lock the memory on startup:

#

#bootstrap.memory_lock: true

#

# Make sure that the heap size is set to about half the memory available

# on the system and that the owner of the process is allowed to use this

# limit.

#

# Elasticsearch performs poorly when the system is swapping the memory.

#

# ---------------------------------- Network -----------------------------------

#

# Set the bind address to a specific IP (IPv4 or IPv6):

#

network.host: 127.0.0.1

#

# Set a custom port for HTTP:

#

http.port: 9200

#

# For more information, consult the network module documentation.

#

# --------------------------------- Discovery ----------------------------------

#

# Pass an initial list of hosts to perform discovery when new node is started:

# The default list of hosts is ["127.0.0.1", "[::1]"]

#

#discovery.zen.ping.unicast.hosts: ["host1", "host2"]

#

# Prevent the "split brain" by configuring the majority of nodes (total number of master-eligible nodes / 2 + 1):

#

#discovery.zen.minimum_master_nodes:

#

# For more information, consult the zen discovery module documentation.

#

# ---------------------------------- Gateway -----------------------------------

#

# Block initial recovery after a full cluster restart until N nodes are started:

#

#gateway.recover_after_nodes: 3

#

# For more information, consult the gateway module documentation.

#

# ---------------------------------- Various -----------------------------------

#

# Require explicit names when deleting indices:

#

#action.destructive_requires_name: true

http.cors.enabled: true

http.cors.allow-origin: "*"

node.master: true

4、将elasticsearch复制一份，修改elasticsearch.yml文件内容。

# ======================== Elasticsearch Configuration =========================

#

# NOTE: Elasticsearch comes with reasonable defaults for most settings.

#       Before you set out to tweak and tune the configuration, make sure you

#       understand what are you trying to accomplish and the consequences.

#

# The primary way of configuring a node is via this file. This template lists

# the most important settings you may want to configure for a production cluster.

#

# Please consult the documentation for further information on configuration options:

# https://www.elastic.co/guide/en/elasticsearch/reference/index.html

#

# ---------------------------------- Cluster -----------------------------------

#

# Use a descriptive name for your cluster:

#

cluster.name: my-application

#

# ------------------------------------ Node ------------------------------------

#

# Use a descriptive name for the node:

#

node.name: node-2

#

# Add custom attributes to the node:

#

node.attr.rack: r1

#

# ----------------------------------- Paths ------------------------------------

#

# Path to directory where to store the data (separate multiple locations by comma):

#

path.data: /path/to/data

#

# Path to log files:

#

path.logs: /path/to/logs

#

# ----------------------------------- Memory -----------------------------------

#

# Lock the memory on startup:

#

#bootstrap.memory_lock: true

#

# Make sure that the heap size is set to about half the memory available

# on the system and that the owner of the process is allowed to use this

# limit.

#

# Elasticsearch performs poorly when the system is swapping the memory.

#

# ---------------------------------- Network -----------------------------------

#

# Set the bind address to a specific IP (IPv4 or IPv6):

#

network.host: 0.0.0.0

#

# Set a custom port for HTTP:

#

http.port: 8200

#

# For more information, consult the network module documentation.

#

# --------------------------------- Discovery ----------------------------------

#

# Pass an initial list of hosts to perform discovery when new node is started:

# The default list of hosts is ["127.0.0.1", "[::1]"]

#

discovery.zen.ping.unicast.hosts: ["127.0.0.1"]

#

# Prevent the "split brain" by configuring the majority of nodes (total number of master-eligible nodes / 2 + 1):

#

#discovery.zen.minimum_master_nodes:

#

# For more information, consult the zen discovery module documentation.

#

# ---------------------------------- Gateway -----------------------------------

#

# Block initial recovery after a full cluster restart until N nodes are started:

#

#gateway.recover_after_nodes: 3

#

# For more information, consult the gateway module documentation.

#

# ---------------------------------- Various -----------------------------------

#

# Require explicit names when deleting indices:

#

#action.destructive_requires_name: true

http.cors.enabled: true

http.cors.allow-origin: "*"

node.data: true

5.安装elasticsearch-head插件，用于可视化。

(1)、安装node

　　　　从地址：https://nodejs.org/en/download/ 下载相应系统的msi，双击安装。

(2)、安装完成后在cmd里面执行node -v可以查看版本号，确认是否安装成功。

(3)、在cmd里面执行 npm install -g grunt-cli 安装grunt，安装完成后执行grunt -version查询版本号，确定是否成功。

(4)、下载elasticsearch-head插件，在https://github.com/mobz/elasticsearch-head中下载head插件，选择下载zip。

(5)、将其解压到elasticsearch的安装目录下面

(6)、进入elasticsearch-head插件目录里面，修改Gruntfile.js文件，在对应的地方加上 hostname:'*'。

connect: {

			server: {

				options: {

					hostname:'*',

					port: 9100,

					base: '.',

					keepalive: true

				}

			}

		}

6、测试安装是否成功。

(1)、进入elasticsearch目录的bin目录下面，点击elasticearch.bat文件，进行启动。

(2)、和第一步一样启动复制出来的另一个elasticsearch。

(3)、启动完成后在浏览器访问  http://127.0.0.1:9200,如果输出一下json串表示启动成功。

(4)、cmd进入elasticsearch-head插件的目录下面，执行以下命令  grunt server，显示如下这表示运行成功。

(5)、在浏览器访问 http:127.0.0.1:9100，就可以进行可视化查看。

elasticsearch（一）：安装与配置的更多相关文章

  1. 【ELK】ELK安装与配置

    一.ELK体系结构 二.系统环境变量 [主机信息] IP 主机名 操作系统版本 10.10.10.102 console CentOS7.5 10.10.10.103 log1 CentOS7.510 ...

  2. ELK学习记录二 ：elasticsearch、logstash及kibana的安装与配置

    注意事项: 1.ELK版本要求5.X以上,本人使用版本:elasticsearch-6.0.0.kibana-6.0.0-linux-x86_64.logstash-6.0.0.tar 2.Elast ...

  3. elasticsearch以及head插件在centos7上的安装与配置教程

    ElasticSearch是一个基于Lucene的搜索服务器.它提供了一个分布式多用户能力的全文搜索引擎,基于RESTful web接口.Elasticsearch是用Java开发的,并作为Apach ...

  4. CentOS7下 简单安装和配置Elasticsearch Kibana Filebeat 快速搭建集群日志收集平台

    目录 1.添加elasticsearch官网的yum源 2.Elasticsearch 安装elasticsearch 配置elasticsearch 启动elasticsearch并设为开机启动 3 ...

  5. elasticsearch安装与使用（5）-- search guard安装与配置

    一.安装search guard插件必须要安装两部分: ①search-guard-xx ②search-guard-ssl (XX指的是与elasticsearch引擎对应的版本) github地址 ...

  6. Elasticsearch环境安装配置

    安装Elasticsearch的步骤如下 - 第1步 - 查看安装在计算机上的java的最低版本,它要求java 7或以上或最新的版本.可以通过执行以下操作进行检查 - 在Windows操作系统(OS ...

  7. Elasticsearch 6.3.1、Head插件 安装及配置

    安装Elasticsearch Elasticsearch下载地址:https://www.elastic.co/cn/downloads/elasticsearch 也可以直接使用wget下载到某目 ...

  8. ElasticSearch搜索引擎安装配置拼音插件pinyin

    近几篇ElasticSearch系列: 1.阿里云服务器Linux系统安装配置ElasticSearch搜索引擎 2.Linux系统中ElasticSearch搜索引擎安装配置Head插件 3.Ela ...

  9. ElasticSearch搜索引擎安装配置中文分词器IK插件

    近几篇ElasticSearch系列: 1.阿里云服务器Linux系统安装配置ElasticSearch搜索引擎 2.Linux系统中ElasticSearch搜索引擎安装配置Head插件 3.Ela ...

随机推荐

  1. java web eclipse中项目的加载过程

    java web eclipse中项目的加载过程: Tomcat默认从WEB-INF/目录下加载资源,Eclipse在发布程序的时候,并没有把User Libraries的相关资源拷贝到WEB-INF ...

  2. 99 Times--Kate Voegele

    歌手 Kate Voegele 是美国俄亥俄州的一位年轻创作型歌手,她会唱歌.会写歌.特 别擅长弹吉他.还会弹钢琴.她是美国新生代歌手中的佼佼者. 99 Times--Kate Voegele   S ...

  3. 自适应XAML布局经验总结 （二） 局部布局设计模式1

    本系列对实际项目中的XAML布局场景进行总结,给出了较优化的自适应布局解决方案,希望对大家有所帮助. 下面开始介绍局部布局设计模式. 1. 工具栏模式 适用于工具栏,标题等的布局. 此块布局区域外层使 ...

  4. LeetCode140：Word Break II

    题目: Given a string s and a dictionary of words dict, add spaces in s to construct a sentence where e ...

  5. 【原创】Self-Contained Container（自包含容器）

    自包含容器是一种自包含的结构,很有趣.需要使用模板类,但只有在模板类型是该类的子类时,才使该类具有自包含的结构.这种结构从数据结构的角度看比较有用.通常的树类中的模板通常是“数据”的概念,即模板不参与 ...

  6. WebAPI开发中的定时处理

    https://blog.csdn.net/lordwish/article/details/77931897

  7. 记录.NET Core通过Docker部署到Linux

    1.现在CentOS安装Docker环境(参考地址:https://docs.docker-cn.com/engine/installation/linux/docker-ce/centos/) 我这 ...

  8. NetCore入门篇：（八）Net Core项目使用Controller之三

    一.简介 1.本节主要说明入参的几种接收方式 二.不限定模式 1.定义一个id入参与一个model入参. 2.get\post分别查看访问效果. api代码 public class OneContr ...

  9. C# RSA加解密和MD5加密

    1.RSA加密 /// <summary> /// 加密处理 /// </summary> /// <param name="content"> ...

  10. 使用JQuery插件Jcrop进行图片截取

    Jcrop插件本身并不含有图片截取功能,它仅仅是在前端层面构建一套截取动画效果并产生4个坐标点,插件使用者将这4个坐标点传回至服务器接口上进行截取操作.其优点是具有较高的通用性.浏览器兼容性(IE6+ ...