Win7安装错误提示与解决办法大全
Windows7安装时有许多提示错误,许多朋友不知道如何解决,那就看看这篇软媒整理的文章吧,或许有些帮助。本文出现的问题同样应用于其他版本的Windows 7,甚至是Vista,收藏一下本文,或者某天,去搜索引擎搜索一下出现的问题。
序号:1
原文:Please wait…
翻译:请稍候…
解决办法:这是安装开始时安装程序加载时的提示语。如果卡在这个地方,请检查硬件是否正常,如果正常请检查MD5是否一致。如果配置低,可能要多等一下,请耐心等待。在PE2.0以下在这一步会提示无法安装,原因是PE版本太低。请使用高于或等于2.0版的PE,论坛有提供
序号:2
原文:Setup is copying temporary files…
翻译:程序正在复制临时文件…
解决办法:同1
序号:3
原文:Setup is starting…
翻译:安装正在启动
解决办法:同1
序号:4
原文:Windows installation cannot be started from the current operating system. To install Windows, boot from the installation media, or upgrade to Windows XP or later and restart the installation.
翻译:无法从当前操作系统启动Windows安装。若要安装Windows,请从安装介质启动,或升级到Windows XP或更高版本,然后重新启动安装。
解决办法:已经说得很清楚了,如果你是从2000系统安装,那是不行的。请在XP或者2003、Vista升级或安装。
序号:5
原文:Install Windows
翻译:安装Windows
解决办法:同1
序号:6
原文:Windows could not load required file. The file may be corrupt. To install Windows, restart the installation. Error code: 0x%2!X!
翻译:Windows无法加载所需的文件。该文件可能已损坏。若要安装 Windows,请重新启动安装。错误代码: 0x%2!X!
解决办法:典型的ISO文件损坏情况,请检查ISO的MD5是否一致,ISO损坏的原因很可能是下载时造成的。请使用其他下载工具下载。比如我上次用迅雷下载后发现MD5不一样。只得重新下载,第二次下载后一致了。如果是刻碟安装,很可能是光盘损坏或有些文件刻录时错误。请重新刻录。
序号:7
原文:You must be an administrator to install Windows.
翻译:您必须是管理员才能安装Windows。
解决办法:出现这种情况很可能是从Vista升级,权限不够。所以请关闭系统保护后重新安装。或者在PE中的权限不够,请用administrator用户登陆系统。
序号:8
原文:Windows Setup does not support this usage of the /BTFolderPath command-line argument. To install Windows, restart the installation without this argument.
翻译:Windows 安装程序不支持 /BTFolderPath 命令行参数的此种用法。若要安装 Windows,请在不使用该参数的情况下重新启动安装。
解决办法:出现这种情况是手动修改setup.exe参数造成,如果你没有修改过就不会出现。如果在语句后有此语法,请手动删除。
序号:9
原文:Windows cannot display Setup in the language. Error code: 0x%2!X!
翻译:Windows 无法显示***X语言的安装程序。错误代码: 0******
解决办法:很可能是语言文件损坏或安装程序中没有相应语言。请检查ISO的MD5是否正确,刻录没有错误。检查ISO目录下的文件是否删除过。建议不要使用vLite进行精简。
序号:10
原文:Windows could not determine the language to use for Setup. Error code: 0x%1!X!
翻译:Windows 无法确定用于安装程序的语言。错误代码: 0******
解决办法:同9,可手动修改语言,在Vlite中设置默认安装语言即可。一般不会出现这种情况。
序号:11
原文:This version of Windows is for a 32-bit machine and cannot run on the current 64-bit operating system.
翻译:此版本的Windows用于32位计算机,无法在当前的64位操作系统上运行。
解决办法:我用的是32位Windows ,如果你用64位安装程序在32位操作系统上安装就会提示:“此版本的Windows用于64位计算机,无法在当前的32位操作系统上运行。”或“不是有效的64位程序”。如果不懂的话请百度一下搜索32位与64位的关系吧
序号:12
原文:Windows could not create temporary folder [%1!s!]. Make sure you have permission to create this folder, and restart the installation. Error code: 0x%2!X!
翻译:Windows 无法创建临时文件夹。请确保您具有创建该文件夹的权限,并重新启动安装。错误代码: 0******
解决办法:请在其他磁盘留出至少2G的空间,因为Windows会把临时文件先放在剩余空间最多的磁盘.留好之后重新打开安装程序即可正常安装!这就是之所以为什么会出现这个错误的原因。
序号:13
原文:Windows could not update the installation files. To install Windows, close Setup and restart the installation. Error code: 0x%1!X!
翻译:Windows 无法更新安装文件。若要安装 Windows,请关闭安装程序并重新启动安装。错误代码:0******
解决办法:原因有几点,如果光盘安装请不要选择联网进行更新,光盘是只读的。建议不要选择联网下载更新文件,直接选跳过最好.没联网的话无法下载就会提示这个错误.
序号:14
原文:Windows could not start Setup from the local system. To install Windows, close Setup and restart the installation.Error code: 0x%2!X!
翻译:Windows 无法从本地系统启动安装程序。若要安装 Windows,请关闭安装程序并重新启动安装。
解决办法:因为当前操作系统低于XP,请使用XP或更好的操作系统进行安装,使用PE2.0以上进行安装.不要用DOS安装.
序号:15
原文:Windows was unable to copy installation files due to an internal error. To install Windows, restart the installation.
翻译:由于内部错误,Windows 无法复制安装文件。若要安装 Windows,请重新启动安装。
解决办法:同6。请检查ISO的MD5是否正确
序号:16
原文:Windows Setup experienced an unexpected error. To install Windows, restart the installation. Error code: 0x%1!X!
翻译:Windows 安装程序出现错误。若要安装 Windows,请重新启动安装。错误代码: 0******
解决办法:请重试几次。如果还是不行同6。
序号:17
原文:Install Windows
翻译:安装Windows
解决办法:同1
序号:18
原文:Windows was unable to create a required installation folder. Error code: 0x%1!X!
翻译:Windows 无法创建所需的安装文件夹。错误代码::0******
解决办法:同6或同12
序号:19
原文:Windows Setup cannot find a location to store temporary installation files. To install Windows, make sure that a partition on your boot disk has at least 5216! megabytes (MB) of free space.Error code: 0x%1!X!
翻译:系统分区X:上的可用空间不足。Windows 安装至少需要该分区上5216兆字节(MB)的空间。若要安装 Windows,请释放足够的空间,并重新启动安装。错误代码:0******
解决办法:安装盘上必须至少有5.1G的空间.比如安装到C盘,C盘必须还剩下5.1G的硬盘空间,如果不够.请删除一些东西.或重新分区.
序号:20
原文:Windows was unable to create required installation folder. An existing file or folder of this name could not be deleted.Error code: 0x%1!X!
翻译:Windows 无法创建所需的安装文件夹。无法删除具有该名称的现有文件或文件夹。错误代码:0******
解决办法:创建文件名重复,并且原文件无法覆盖造成的错误。请最好在空磁盘上安装。或删除原来重复的文件。比如XP与7不能同盘(指一般安装)
序号:21
原文:Windows was unable to locate required installation file. Verify that the installation source is valid, and restart the installation.
翻译:Windows 无法找到所需的安装文件。请验证安装源是否有效,并重新启动安装。
解决办法:原文件被删除或破坏或丢失。请重新下载ISO文件。同6
序号:22
原文:Windows installation encountered an unexpected error. Verify that the installation sources are accessible, and restart the installation.
翻译:Windows 安装出现错误。请验证安装源是否可访问,并重新启动安装。
解决办法:同6
序号:23
原文:Windows cannot access the installation sources. Verify that the installation sources are accessible, and restart the installation.
翻译:Windows 无法访问安装源。请验证安装源是否可访问,并重新启动安装。
解决办法:同6
序号:24
原文:Windows Setup cannot find a location to store temporary installation files. Make sure BitLocker Drive Encryption is suspended (also referred to as disabled).
翻译:Windows不能找到临时安装文件,请重新启动安装
解决办法:请确认在安装过程你没有删除任何安装文件,比如安装到一半,你进入PE删除了某些文件。遇到此问题请重新安装Windows。
Win7安装错误提示与解决办法大全的更多相关文章
- git push时错误提示的解决办法 By default, updating the current branch in a non-bare repository error: is denied,
在使用git将客户端的修改push到服务器上的时候,出现无法push,提示和stackoverflow上的http://stackoverflow.com/questions/2816369/git- ...
- 使用dedecms中常见错误提示及解决办法(一)
在使用 dedecms 做网站时,常常会遇到一些棘手的问题,比如:页面图片不显示(src 的地址不对)等等. 1. 更新网站时错误 问题:Call to a member function GetIn ...
- 安装时提示 INSTALL_PARSE_FAILED_MANIFEST_MALFORMED 解决办法
INSTALL_PARSE_FAILED_MANIFEST_MALFORMED 安装时出现这个提示. 是由于你工程的AndroidManifest.xml 配置有误,一般来说是activity或Ser ...
- 【错误】mysql 出现 "1067 - Invalid default value for 'UPDATE_TIME' " 错误提示的解决办法
今天工作中遇到修改表结构的时候出现错误 Invalid default value for 'UPDATE_TIME 问题原因是因为db 表中update_time的默认时间写成了 '0000-00- ...
- VMware workstation 安装错误提示1021解决方法
Failed to create the requested registry key Key: Installer Error: 1021 解决方法:删除注册表--HKEY_LOCAL_MACHIN ...
- 运行js提示库没有注册错误8002801d的解决办法
运行js提示库没有注册错误8002801d的解决办法这个错误主要是因为服务器上的windows scripts版本较低,请按下面的链接下载较高版本windows scripts 5.6并在服务器上进行 ...
- npm install 错误 安装 chromedriver 失败的解决办法
npm 安装 chromedriver 失败的解决办法npm 安装 chromedriver 时,偶尔会出错,错误提示类似于:npm ERR! chromedriver@2.35.0 install: ...
- Sqlserver2005附加数据库时出错提示操作系统错误5(拒绝访问)错误5120的解决办法
Sqlserver2005附加数据库时出错提示操作系统错误5(拒绝访问)错误5120的解决办法 最近几天从网上找了几个asp.net的登录案例想要研究研究代码,结果在用 Sql Server2005附 ...
- SQLServer2005+附加数据库时出错提示操作系统错误5(拒绝访问)错误5120的解决办法
SQLServer2005+ 附加数据库时出错提示操作系统错误5(拒绝访问)错误5120的解决办法 我们在用Sql SQLServer2005+附加数据库文件时弹出错误信息如下图的处理办法: 方案一: ...
随机推荐
- DevExpress gridView 小结(一)
一:第一列显示行号 CustomDrawRowIndicator this.gridViewDevice.IndicatorWidth = 40; this.gridViewDevice.Custo ...
- debian修改ip地址
1.设置IP地址.网关nano /etc/network/interfaces /etc/network/interfacesbak #备份原有配置文件 nano /etc/network/inter ...
- PHP中使用多线程
<?php while(1)//循环采用3个进程 { //declare(ticks=1); $bWaitFlag= FALSE; // 是否等待进程结束 //$bWaitFlag = TRUE ...
- phpcms v9 自定义伪静态的分页函数
因为.这个页面还没做好..等做好了..再给大家演示...... 调用方法:$page_attr=pages_open($num[0]['cun'],$get_page,$max_page,'http: ...
- 在fedora 桌面上添加应用程序
在网上下了个android studio,这个程序只是的压缩包,解压后程序也只能在SHELL下敲入studio.sh才能运行 能不能向其他程序一样,在fedora桌面上找到应用程序,点击执行呢.在网上 ...
- Oracle bug 使用max或min函数into到一个char类型报字符缓冲区太小的错误
这个BUG出现会报错如下: selectto_char(max(RENEWAL_DATE)) intoM_YEAR_MONTH fromt_renewal_schedule; ORA-06502: P ...
- GIS业务逻辑
三维怎么加载数据文件? OpenFileDialog frm = new OpenFileDialog(); frm.Filter = "文件数据集|*.tile|多时相数据集|*.Temp ...
- EvnetBus
领域事件(EvnetBus) 文档目录 本节内容: EventBus 注入 IEventBus 获取默认实例 定义事件 预定义事件 处理完异常 实体修改 触发事件 处理事件 处理基类事件 处理程序 ...
- MITK-Qt4.8.4(x64)+VS2012+Win7_X64 编译记录
本文参考 http://blog.csdn.net/lanxuxml/article/details/9232529(中文) http://docs.mitk.org/nightly-qt4/Buil ...
- 使用Yeoman搭建 AngularJS 应用 (12) —— 让我们搭建一个网页应用
原文地址:http://yeoman.io/codelab/local-storage.html 安装Bower程序包 我们使用另一个Angular模块,"angular-local-sto ...