7个传播行为,4个隔离级别(转自 http://www.blogjava.net/freeman1984/archive/2010/04/28/319595.html

Spring事务的传播行为和隔离级别[transaction behavior and isolated level]2007-08-01 16:33事务的传播行为和隔离级别[transaction behavior and isolated level]

Spring中事务的定义:
一、Propagation :
  key属性确定代理应该给哪个方法增加事务行为。这样的属性最重要的部份是传播行为。有以下选项可供使用:
PROPAGATION_REQUIRED--支持当前事务,如果当前没有事务,就新建一个事务。这是最常见的选择。 
PROPAGATION_SUPPORTS--支持当前事务,如果当前没有事务,就以非事务方式执行。 
PROPAGATION_MANDATORY--支持当前事务,如果当前没有事务,就抛出异常。 
PROPAGATION_REQUIRES_NEW--新建事务,如果当前存在事务,把当前事务挂起。 
PROPAGATION_NOT_SUPPORTED--以非事务方式执行操作,如果当前存在事务,就把当前事务挂起。 
PROPAGATION_NEVER--以非事务方式执行,如果当前存在事务,则抛出异常。

很多人看到事务的传播行为属性都不甚了解,我昨晚看了j2ee without ejb的时候,看到这里也不了解,甚至重新翻起数据库系统的教材书,但是也没有找到对这个的分析。今天搜索,找到一篇极好的分析文章,虽然这篇文章是重点分析PROPAGATION_REQUIRED 和 PROPAGATION_REQUIRED_NESTED的
====================================================
 
解惑 spring 嵌套事务 
/** 
* @date 2006-11-24 
* @note 转载自http://www.javaeye.com/topic/35907?page=1
*/ 
********TransactionDefinition 接口定义*******************
/** 
      * Support a current transaction, create a new one if none exists. 
      * Analogous to EJB transaction attribute of the same name. 
      * 
This is typically the default setting of a transaction definition. 
      */ 
     int PROPAGATION_REQUIRED = 0; 
  
     /** 
      * Support a current transaction, execute non-transactionally if none exists. 
      * Analogous to EJB transaction attribute of the same name. 
      *

Note: For transaction managers with transaction synchronization, 
      * PROPAGATION_SUPPORTS is slightly different from no transaction at all, 
      * as it defines a transaction scopp that synchronization will apply for. 
      * As a consequence, the same resources (JDBC Connection, Hibernate Session, etc) 
      * will be shared for the entire specified scope. Note that this depends on 
      * the actual synchronization configuration of the transaction manager. 
      * @see org.springframework.transaction.support.AbstractPlatformTransactionManager#setTransactionSynchronization 
      */ 
     int PROPAGATION_SUPPORTS = 1; 
  
     /** 
      * Support a current transaction, throw an exception if none exists. 
      * Analogous to EJB transaction attribute of the same name. 
      */ 
     int PROPAGATION_MANDATORY = 2; 
  
     /** 
      * Create a new transaction, suspend the current transaction if one exists. 
      * Analogous to EJB transaction attribute of the same name. 
      *

Note: Actual transaction suspension will not work on out-of-the-box 
      * on all transaction managers. This in particular applies to JtaTransactionManager, 
      * which requires the javax.transaction.TransactionManager to be 
      * made available it to it (which is server-specific in standard J2EE). 
      * @see org.springframework.transaction.jta.JtaTransactionManager#setTransactionManager 
      */ 
     int PROPAGATION_REQUIRES_NEW = 3; 
  
     /** 
      * Execute non-transactionally, suspend the current transaction if one exists. 
      * Analogous to EJB transaction attribute of the same name. 
      *

Note: Actual transaction suspension will not work on out-of-the-box 
      * on all transaction managers. This in particular applies to JtaTransactionManager, 
      * which requires the javax.transaction.TransactionManager to be 
      * made available it to it (which is server-specific in standard J2EE). 
      * @see org.springframework.transaction.jta.JtaTransactionManager#setTransactionManager 
      */ 
     int PROPAGATION_NOT_SUPPORTED = 4; 
  
     /** 
      * Execute non-transactionally, throw an exception if a transaction exists. 
      * Analogous to EJB transaction attribute of the same name. 
      */ 
     int PROPAGATION_NEVER = 5; 
  
     /** 
      * Execute within a nested transaction if a current transaction exists, 
      * behave like PROPAGATION_REQUIRED else. There is no analogous feature in EJB. 
      *

Note: Actual creation of a nested transaction will only work on specific 
      * transaction managers. Out of the box, this only applies to the JDBC 
      * DataSourceTransactionManager when working on a JDBC 3.0 driver. 
      * Some JTA providers might support nested transactions as well. 
      * @see org.springframework.jdbc.datasource.DataSourceTransactionManager 
      */ 
     int PROPAGATION_NESTED = 6;

*************************************************************************
在这篇文章里,他用两个嵌套的例子辅助分析,我这里直接引用了。
********************sample***********************
ServiceA { 
       
     /** 
      * 事务属性配置为 PROPAGATION_REQUIRED 
      */ 
     void methodA() { 
         ServiceB.methodB(); 
     } 
  

  
ServiceB { 
       
     /** 
      * 事务属性配置为 PROPAGATION_REQUIRED 
      */ 
     void methodB() { 
     } 
       

*************************************************
1: PROPAGATION_REQUIRED 
加入当前正要执行的事务不在另外一个事务里,那么就起一个新的事务 
比如说,ServiceB.methodB的事务级别定义为PROPAGATION_REQUIRED, 那么由于执行ServiceA.methodA的时候, 
ServiceA.methodA已经起了事务,这时调用ServiceB.methodB,ServiceB.methodB看到自己已经运行在ServiceA.methodA 
的事务内部,就不再起新的事务。而假如ServiceA.methodA运行的时候发现自己没有在事务中,他就会为自己分配一个事务。 
这样,在ServiceA.methodA或者在ServiceB.methodB内的任何地方出现异常,事务都会被回滚。即使ServiceB.methodB的事务已经被 
提交,但是ServiceA.methodA在接下来fail要回滚,ServiceB.methodB也要回滚

2: PROPAGATION_SUPPORTS 
如果当前在事务中,即以事务的形式运行,如果当前不再一个事务中,那么就以非事务的形式运行

3: PROPAGATION_MANDATORY 
必须在一个事务中运行。也就是说,他只能被一个父事务调用。否则,他就要抛出异常

4: PROPAGATION_REQUIRES_NEW 
这个就比较绕口了。 比如我们设计ServiceA.methodA的事务级别为PROPAGATION_REQUIRED,ServiceB.methodB的事务级别为PROPAGATION_REQUIRES_NEW, 
那么当执行到ServiceB.methodB的时候,ServiceA.methodA所在的事务就会挂起,ServiceB.methodB会起一个新的事务,等待ServiceB.methodB的事务完成以后, 
他才继续执行。他与PROPAGATION_REQUIRED 的事务区别在于事务的回滚程度了。因为ServiceB.methodB是新起一个事务,那么就是存在 
两个不同的事务。如果ServiceB.methodB已经提交,那么ServiceA.methodA失败回滚,ServiceB.methodB是不会回滚的。如果ServiceB.methodB失败回滚, 
如果他抛出的异常被ServiceA.methodA捕获,ServiceA.methodA事务仍然可能提交。

5: PROPAGATION_NOT_SUPPORTED 
当前不支持事务。比如ServiceA.methodA的事务级别是PROPAGATION_REQUIRED ,而ServiceB.methodB的事务级别是PROPAGATION_NOT_SUPPORTED , 
那么当执行到ServiceB.methodB时,ServiceA.methodA的事务挂起,而他以非事务的状态运行完,再继续ServiceA.methodA的事务。

6: PROPAGATION_NEVER 
不能在事务中运行。假设ServiceA.methodA的事务级别是PROPAGATION_REQUIRED, 而ServiceB.methodB的事务级别是PROPAGATION_NEVER , 
那么ServiceB.methodB就要抛出异常了。

7: PROPAGATION_NESTED 
理解Nested的关键是savepoint。他与PROPAGATION_REQUIRES_NEW的区别是,PROPAGATION_REQUIRES_NEW另起一个事务,将会与他的父事务相互独立, 
而Nested的事务和他的父事务是相依的,他的提交是要等和他的父事务一块提交的。也就是说,如果父事务最后回滚,他也要回滚的。 
而Nested事务的好处是他有一个savepoint。 
***************************************** 
ServiceA {

/** 
* 事务属性配置为 PROPAGATION_REQUIRED 
*/ 
void methodA() { 
try { 
//savepoint

ServiceB.methodB(); //PROPAGATION_NESTED 级别

} catch (SomeException) { 
// 执行其他业务, 如 ServiceC.methodC();


}


******************************************** 
也就是说ServiceB.methodB失败回滚,那么ServiceA.methodA也会回滚到savepoint点上,ServiceA.methodA可以选择另外一个分支,比如 
ServiceC.methodC,继续执行,来尝试完成自己的事务。 
但是这个事务并没有在EJB标准中定义。

二、Isolation Level(事务隔离等级): 
1、Serializable:最严格的级别,事务串行执行,资源消耗最大; 
2、REPEATABLE READ:保证了一个事务不会修改已经由另一个事务读取但未提交(回滚)的数据。避免了“脏读取”和“不可重复读取”的情况,但是带来了更多的性能损失。 
3、READ COMMITTED:大多数主流数据库的默认事务等级,保证了一个事务不会读到另一个并行事务已修改但未提交的数据,避免了“脏读取”。该级别适用于大多数系统。 
4、Read Uncommitted:保证了读取过程中不会读取到非法数据。隔离级别在于处理多事务的并发问题。 
我们知道并行可以提高数据库的吞吐量和效率,但是并不是所有的并发事务都可以并发运行,这需要查看数据库教材的可串行化条件判断了。 
这里就不阐述。 
我们首先说并发中可能发生的3中不讨人喜欢的事情 
1: Dirty reads--读脏数据。也就是说,比如事务A的未提交(还依然缓存)的数据被事务B读走,如果事务A失败回滚,会导致事务B所读取的的数据是错误的。 
2: non-repeatable reads--数据不可重复读。比如事务A中两处读取数据-total-的值。在第一读的时候,total是100,然后事务B就把total的数据改成200,事务A再读一次,结果就发现,total竟然就变成200了,造成事务A数据混乱。 
3: phantom reads--幻象读数据,这个和non-repeatable reads相似,也是同一个事务中多次读不一致的问题。但是non-repeatable reads的不一致是因为他所要取的数据集被改变了(比如total的数据),但是phantom reads所要读的数据的不一致却不是他所要读的数据集改变,而是他的条件数据集改变。比如Select account.id where account.name="ppgogo*",第一次读去了6个符合条件的id,第二次读取的时候,由于事务b把一个帐号的名字由"dd"改成"ppgogo1",结果取出来了7个数据。 Dirty reads non-repeatable reads phantom reads 
Serializable 不会 不会 不会 
REPEATABLE READ 不会 不会 会 
READ COMMITTED 不会 会 会 
Read Uncommitted 会 会 会

三、readOnly 
事务属性中的readOnly标志表示对应的事务应该被最优化为只读事务。

这是一个最优化提示。在一些情况下,一些事务策略能够起到显著的最优化效果,例如在使用Object/Relational映射工具(如:Hibernate或TopLink)时避免dirty checking(试图“刷新”)。

四、Timeout

在事务属性中还有定义“timeout”值的选项,指定事务超时为几秒。在JTA中,这将被简单地传递到J2EE服务器的事务协调程序,并据此得到相应的解释。

spring的传播行为和隔离级别的更多相关文章

  1. Spring事务传播机制与隔离级别(转)

    Spring事务传播机制与隔离级别 博客分类: Spring   转自:http://blog.csdn.net/edward0830ly/article/details/7569954 (写的不错) ...

  2. spring事务传播属性和隔离级别

    猫咪咪的Java世界 spring事务传播属性和隔离级别 博客分类: Spring java编程   1 事务的传播属性(Propagation) 1) REQUIRED ,这个是默认的属性 Supp ...

  3. spring事物传播机制与隔离级别

    转载自:http://www.blogjava.net/freeman1984/archive/2010/04/28/319595.html7个传播行为,4个隔离级别, Spring事务的传播行为和隔 ...

  4. 浅析Spring事务传播行为和隔离级别

    7个传播行为.4个隔离级别. Spring事务的传播行为和隔离级别[transaction behaviorand isolatedlevel] Spring中事务的定义: Propagation(k ...

  5. spring 事务传播特性 和隔离级别

    事务的几种传播特性1. PROPAGATION_REQUIRED: 如果存在一个事务,则支持当前事务.如果没有事务则开启2. PROPAGATION_SUPPORTS: 如果存在一个事务,支持当前事务 ...

  6. spring事务传播机制与隔离级别、通知类别

    Spring在TransactionDefinition接口中规定了7种类型的事务传播行为, 它们规定了事务方法和事务方法发生嵌套调用时事务如何进行传播: 事务传播行为类型 说明 PROPAGATIO ...

  7. spring事务传播属性与隔离级别

    一.Propagation (事务的传播属性) Propagation : key属性确定代理应该给哪个方法增加事务行为.这样的属性最重要的部份是传播行为. 有以下选项可供使用: PROPAGATIO ...

  8. spring事务传播性与隔离级别

    事务的7种传播级别: 1)PROPAGATION_REQUIRED:支持当前事务,没有事务就新建一个. 2)PROPAGATION_SUPPORTS:支持当前事务,如果没有事务,以非事务方式处理 3) ...

  9. spring事物传播机制 事物隔离级别

    Spring事务类型详解: PROPAGATION_REQUIRED--支持当前事务,如果当前没有事务,就新建一个事务.这是最常见的选择. PROPAGATION_SUPPORTS--支持当前事务,如 ...

随机推荐

  1. 《selenium2 python 自动化测试实战》(11)——selenium安装版本

    先和大家说一下selenium环境的问题,大家可以在cmd里先看一下自己的selenium版本: 回车,就可以安装了. 本来想和大家说如何跳过验证码进行登录的,结果好多朋友加我问我环境配置的问题,所以 ...

  2. 动态添加 items to PopupMenu

    引用自http://stackoverflow.com/questions/10175140/adding-items-to-popupmenu DevExpress.XtraBars.BarMana ...

  3. html页面设置一个跟随鼠标移动的DIV(jQuery实现)

    说明业务:鼠标放到某个标签上,显示一个div,并跟随鼠标移动 html页面(直接放body里面): <a href="#" id="'+data[i].refund ...

  4. Go编译安装

    go编译安装: 设置环境变量 # sudo vim /etc/profile.d/go export GOROOT=/home/evescn/go export PATH=$PATH:$GOROOT/ ...

  5. win10下安装并启动zookeeper

    下载直接到zk的官网(zookeeper.apache.org)即可,点击右边的Releases,在Download下再点Download进入镜像下载页面,在给出的链接列表里选择一个镜像地址,进去后选 ...

  6. foreach(PHP学习)

    先来看一个例子: $arr = array(0,1,2,3,4);让数组的每个值都变成原来的两倍,应该怎么来实现? 如果没有学习foreach之前,会想到用for循环 <?php $arr = ...

  7. 黄聪:使用Add-on SDK开发火狐扩展

    2014年3月7号更新:火狐已经关闭Add-on SDK服务啦!我也转用360急速浏览器来开发浏览器插件了. 如果精通JS.HTML.CSS开发的朋友,直接看这个教程估计就能懂了 ---------- ...

  8. POJ 3684 Physics Experiment(弹性碰撞)

    Physics Experiment Time Limit: 1000MS   Memory Limit: 65536K Total Submissions: 2936   Accepted: 104 ...

  9. Tool:Visual Studio

    ylbtech-Tool:Visual Studio Microsoft Visual Studio(简称VS)是美国微软公司的开发工具包系列产品.VS是一个基本完整的开发工具集,它包括了整个软件生命 ...

  10. 1095 Cars on Campus

    题意:给出N量车的车牌号,进出的时间,进/出状态.然后给出若干个查询,要求计算在每一查询时刻校园内停着的汽车数量,最后输出这一天中停放时间最长的车辆(若车不止一辆,则按字典序输出)以及停放时间.注:查 ...