0.配置文件

   两个核心文件:ansible.cfg和hosts文件,默认都存放在/etc/ansible目录下。

   ansible.cfg:主要设置一些ansible初始化的信息,比如日志存放路径、模块、插件等配置信息

   hosts:机器清单,进行分组管理

 1.ansible.cfg

# config file for ansible -- http://ansible.com/
# ============================================== # nearly all parameters can be overridden in ansible-playbook
# or with command line flags. ansible will read ANSIBLE_CONFIG,
# ansible.cfg in the current working directory, .ansible.cfg in
# the home directory or /etc/ansible/ansible.cfg, whichever it
# finds first [defaults] --->通用默认配置 # some basic default values... inventory = /etc/ansible/hosts 这个是默认库文件位置,脚本,或者存放可通信主机的目录
#library = /usr/share/my_modules/ Ansible默认搜寻模块的位置
remote_tmp = $HOME/.ansible/tmp Ansible 通过远程传输模块到远程主机,然后远程执行,执行后在清理现场.在有些场景下,你也许想使用默认路径希望像更换补丁一样使用
pattern = * 如果没有提供“hosts”节点,这是playbook要通信的默认主机组.默认值是对所有主机通信
forks = 在与主机通信时的默认并行进程数 ,默认是5d
poll_interval = 当具体的poll interval 没有定义时,多少时间回查一下这些任务的状态, 默认值是5秒
sudo_user = root sudo使用的默认用户 ,默认是root
#ask_sudo_pass = True 用来控制Ansible playbook 在执行sudo之前是否询问sudo密码.默认为no
#ask_pass = True 控制Ansible playbook 是否会自动默认弹出密码
transport = smart 通信机制.默认 值为’smart’。如果本地系统支持 ControlPersist技术的话,将会使用(基于OpenSSH)‘ssh’,如果不支持讲使用‘paramiko’.其他传输选项包括‘local’, ‘chroot’,’jail’等等
#remote_port = 远程SSH端口。 默认是22
module_lang = C 模块和系统之间通信的计算机语言,默认是C语言 # plays will gather facts by default, which contain information about
# the remote system.
#
# smart - gather by default, but don't regather if already gathered
# implicit - gather by default, turn off with gather_facts: False
# explicit - do not gather by default, must say gather_facts: True
gathering = implicit 控制默认facts收集(远程系统变量). 默认值为’implicit’, 每一次play,facts都会被收集 # additional paths to search for roles in, colon separated
#roles_path = /etc/ansible/roles roles 路径指的是’roles/’下的额外目录,用于playbook搜索Ansible roles # uncomment this to disable SSH key host checking
#host_key_checking = False 检查主机密钥 # change this for alternative sudo implementations
sudo_exe = sudo 如果在其他远程主机上使用另一种方式执sudu操作.可以使用该参数进行更换 # what flags to pass to sudo 传递sudo之外的参数
#sudo_flags = -H # SSH timeout SSH超时时间
timeout = # default user to use for playbooks if user is not specified
# (/usr/bin/ansible will use current user as default)
#remote_user = root 使用/usr/bin/ansible-playbook链接的默认用户名,如果不指定,会使用当前登录的用户名 # logging is off by default unless this path is defined
# if so defined, consider logrotate
#log_path = /var/log/ansible.log 日志文件存放路径 # default module name for /usr/bin/ansible
#module_name = command ansible命令执行默认的模块 # use this shell for commands executed under sudo
# you may need to change this to bin/bash in rare instances
# if sudo is constrained
#executable = /bin/sh 在sudo环境下产生一个shell交互接口. 用户只在/bin/bash的或者sudo限制的一些场景中需要修改 # if inventory variables overlap, does the higher precedence one win
# or are hash values merged together? The default is 'replace' but
# this can also be set to 'merge'.
#hash_behaviour = replace 特定的优先级覆盖变量 # list any Jinja2 extensions to enable here:
#jinja2_extensions = jinja2.ext.do,jinja2.ext.i18n 允许开启Jinja2拓展模块 # if set, always use this private key file for authentication, same as
# if passing --private-key to ansible or ansible-playbook
#private_key_file = /path/to/file 私钥文件存储位置 # format of string {{ ansible_managed }} available within Jinja2
# templates indicates to users editing templates files will be replaced.
# replacing {file}, {host} and {uid} and strftime codes with proper values.
ansible_managed = Ansible managed: {file} modified on %Y-%m-%d %H:%M:%S by {uid} on {host} 这个设置可以告知用户,Ansible修改了一个文件,并且手动写入的内容可能已经被覆盖. # by default, ansible-playbook will display "Skipping [host]" if it determines a task
# should not be run on a host. Set this to "False" if you don't want to see these "Skipping"
# messages. NOTE: the task header will still be shown regardless of whether or not the
# task is skipped.
#display_skipped_hosts = True 显示任何跳过任务的状态 ,默认是显示 # by default (as of 1.3), Ansible will raise errors when attempting to dereference
# Jinja2 variables that are not set in templates or action lines. Uncomment this line
# to revert the behavior to pre-1.3.
#error_on_undefined_vars = False 如果所引用的变量名称错误的话, 将会导致ansible在执行步骤上失败 # by default (as of 1.6), Ansible may display warnings based on the configuration of the
# system running ansible itself. This may include warnings about 3rd party packages or
# other conditions that should be resolved if possible.
# to disable these warnings, set the following value to False:
#system_warnings = True 允许禁用系统运行ansible相关的潜在问题警告 # by default (as of 1.4), Ansible may display deprecation warnings for language
# features that should no longer be used and will be removed in future versions.
# to disable these warnings, set the following value to False:
#deprecation_warnings = True 允许在ansible-playbook输出结果中禁用“不建议使用”警告 # (as of 1.8), Ansible can optionally warn when usage of the shell and
# command module appear to be simplified by using a default Ansible module
# instead. These warnings can be silenced by adjusting the following
# setting or adding warn=yes or warn=no to the end of the command line
# parameter string. This will for example suggest using the git module
# instead of shelling out to the git command.
# command_warnings = False 当shell和命令行模块被默认模块简化的时,Ansible 将默认发出警告 # set plugin path directories here, separate with colons
action_plugins = /usr/share/ansible_plugins/action_plugins
callback_plugins = /usr/share/ansible_plugins/callback_plugins
connection_plugins = /usr/share/ansible_plugins/connection_plugins
lookup_plugins = /usr/share/ansible_plugins/lookup_plugins
vars_plugins = /usr/share/ansible_plugins/vars_plugins
filter_plugins = /usr/share/ansible_plugins/filter_plugins # by default callbacks are not loaded for /bin/ansible, enable this if you
# want, for example, a notification or logging callback to also apply to
# /bin/ansible runs
#bin_ansible_callbacks = False 用来控制callback插件是否在运行 /usr/bin/ansible 的时候被加载. 这个模块将用于命令行的日志系统,发出通知等特性 # don't like cows? that's unfortunate.
# set to if you don't want cowsay support or export ANSIBLE_NOCOWS=1
#nocows = 默认ansible可以调用一些cowsay的特性 开启/禁用:/ # don't like colors either?
# set to if you don't want colors, or export ANSIBLE_NOCOLOR=1
#nocolor = 输出带上颜色区别, 开启/关闭:/ # the CA certificate path used for validating SSL certs. This path
# should exist on the controlling node, not the target nodes
# common locations:
# RHEL/CentOS: /etc/pki/tls/certs/ca-bundle.crt
# Fedora : /etc/pki/ca-trust/extracted/pem/tls-ca-bundle.pem
# Ubuntu : /usr/share/ca-certificates/cacert.org/cacert.org.crt
#ca_file_path = # the http user-agent string to use when fetching urls. Some web server
# operators block the default urllib user agent as it is frequently used
# by malicious attacks/scripts, so we set it to something unique to
# avoid issues.
#http_user_agent = ansible-agent # if set to a persistent type (not 'memory', for example 'redis') fact values
# from previous runs in Ansible will be stored. This may be useful when
# wanting to use, for example, IP information from one group of servers
# without having to talk to them in the same playbook run to get their
# current IP information.
fact_caching = memory # retry files
#retry_files_enabled = False
#retry_files_save_path = ~/.ansible-retry [privilege_escalation]
#become=True
#become_method=sudo
#become_user=root
#become_ask_pass=False [paramiko_connection] # uncomment this line to cause the paramiko connection plugin to not record new host
# keys encountered. Increases performance on new host additions. Setting works independently of the
# host key checking setting above.
#record_host_keys=False # by default, Ansible requests a pseudo-terminal for commands executed under sudo. Uncomment this
# line to disable this behaviour.
#pty=False [ssh_connection] # ssh arguments to use
# Leaving off ControlPersist will result in poor performance, so use
# paramiko on older platforms rather than removing it
#ssh_args = -o ControlMaster=auto -o ControlPersist=60s # The path to use for the ControlPath sockets. This defaults to
# "%(directory)s/ansible-ssh-%%h-%%p-%%r", however on some systems with
# very long hostnames or very long path names (caused by long user names or
# deeply nested home directories) this can exceed the character limit on
# file socket names ( characters for most platforms). In that case, you
# may wish to shorten the string below.
#
# Example:
# control_path = %(directory)s/%%h-%%r
#control_path = %(directory)s/ansible-ssh-%%h-%%p-%%r # Enabling pipelining reduces the number of SSH operations required to
# execute a module on the remote server. This can result in a significant
# performance improvement when enabled, however when using "sudo:" you must
# first disable 'requiretty' in /etc/sudoers
#
# By default, this option is disabled to preserve compatibility with
# sudoers configurations that have requiretty (the default on many distros).
#
#pipelining = False # if True, make ansible use scp if the connection type is ssh
# (default is sftp)
#scp_if_ssh = True [accelerate]
accelerate_port =
accelerate_timeout =
accelerate_connect_timeout = 5.0 # The daemon timeout is measured in minutes. This time is measured
# from the last activity to the accelerate daemon.
accelerate_daemon_timeout = # If set to yes, accelerate_multi_key will allow multiple
# private keys to be uploaded to it, though each user must
# have access to the system via SSH to add a new key. The default
# is "no".
#accelerate_multi_key = yes [selinux]
# file systems that require special treatment when dealing with security context
# the default behaviour that copies the existing context or uses the user default
# needs to be changed to use the file system dependant context.
#special_context_filesystems=nfs,vboxsf,fuse

简易配置:

[defaults]
inventory = /etc/ansible/hosts
sudo_user=root
remote_port=
host_key_checking=False
remote_user=root
log_path=/var/log/ansible.log
module_name=command
private_key_file=/root/.ssh/id_rsa
no_log:True

 2.hosts

# This is the default ansible 'hosts' file.
#
# It should live in /etc/ansible/hosts
#
# - Comments begin with the '#' character
# - Blank lines are ignored
# - Groups of hosts are delimited by [header] elements
# - You can enter hostnames or ip addresses
# - A hostname/ip can be a member of multiple groups # Ex : Ungrouped hosts, specify before any group headers. green.example.com
blue.example.com
192.168.100.1
192.168.100.10 # Ex : A collection of hosts belonging to the 'webservers' group [webservers]
alpha.example.org
beta.example.org
192.168.1.100
192.168.1.110 # If you have multiple hosts following a pattern you can specify
# them like this: www[:].example.com # Ex : A collection of database servers in the 'dbservers' group [dbservers] db01.intranet.mydomain.net
db02.intranet.mydomain.net
10.25.1.56
10.25.1.57 # Here's another example of host ranges, this time there are no
# leading 0s: db-[:]-node.example.com

3.参考资料

 Ansible配置文件

 http://www.ansible.com.cn/docs/intro_configuration.html#environmental-configuration

Ansible学习记录三:配置文件的更多相关文章

  1. JavaScript学习记录三

    title: JavaScript学习记录三 toc: true date: 2018-09-14 23:51:22 --<JavaScript高级程序设计(第2版)>学习笔记 要多查阅M ...

  2. 3.VUE前端框架学习记录三:Vue组件化编码1

    VUE前端框架学习记录三:Vue组件化编码1文字信息没办法描述清楚,主要看编码Demo里面,有附带完整的代码下载地址,有需要的同学到脑图里面自取.脑图地址http://naotu.baidu.com/ ...

  3. ansible 学习记录

    Ansible 的重新学习记录 这里我的Ansible的宿主机是centos 7.2系统,这里我通过yum 安装Ansible 1.配置epel源 sudo yum -y install epel-r ...

  4. Ansible学习记录五:PlayBook学习

    0.介绍 Playbooks 是 Ansible 管理配置.部署应用和编排的语言,可以使用 Playbooks 来描述你想在远程主机执行的策略或者执行的一组步骤过程等 类似于一组任务集,定义好像项目, ...

  5. leveldb 学习记录(三) MemTable 与 Immutable Memtable

    前文: leveldb 学习记录(一) skiplist leveldb 学习记录(二) Slice 存储格式: leveldb数据在内存中以 Memtable存储(核心结构是skiplist 已介绍 ...

  6. Ansible学习记录一:Linux下部署

    0.Ansible介绍 Ansible 是一个简单的自动化运维管理工具,可以用来自动化部署应用.配置.编排 task(持续交付.无宕机更新等),采用 paramiko 协议库(fabric 也使用这个 ...

  7. ansible学习笔记三:playbook和roles

    参考博客: Ansible 系列之 Playbooks 剧本 -飞走不可(博客园) linux运维学习之ansible的playbook及roles的使用 - 51CTO博客 nginx 基于uwsg ...

  8. webrtc学习———记录三:mediaStreamTrack

    参考: https://developer.mozilla.org/en-US/docs/Web/API/MediaStreamTrack 转自http://c.tieba.baidu.com/p/3 ...

  9. SpringMVC学习记录三——8 springmvc和mybatis整合

    8      springmvc和mybatis整合 8.1      需求 使用springmvc和mybatis完成商品列表查询. 8.2      整合思路 springmvc+mybaits的 ...

随机推荐

  1. python 中的property

    """ property() 的第一个参数是 getter 方法,第二个参数是 setter 方法 xx = property(a,b) @property #用于指示g ...

  2. Vue总结(三)

    Vue 实例还暴露了一些有用的实例属性与方法.它们都有前缀 $,以便与用户定义的属性区分开来. var App = new Vue({ el: "#root", data: { m ...

  3. NodeJS学习笔记 (24)本地路径处理-path(ok)

    模块概览 在nodejs中,path是个使用频率很高,但却让人又爱又恨的模块.部分因为文档说的不够清晰,部分因为接口的平台差异性. 将path的接口按照用途归类,仔细琢磨琢磨,也就没那么费解了. 获取 ...

  4. Haproxy实现web的页面的动静分离

    一.Haproxy概述: 概述:Haproxy是一个开源的高性能的反向代理或者说是负载均衡服务软件之一,由C语言编写而成,支持会话保持.七层处理.健康检查.故障修复后自动加载.动静分离.HAProxy ...

  5. CSU 1446 Modified LCS 扩展欧几里得

    要死了,这个题竟然做了两天……各种奇葩的错误…… HNU的12831也是这个题. 题意: 给你两个等差数列,求这两个数列的公共元素的数量. 每个数列按照以下格式给出: N F D(分别表示每个数列的长 ...

  6. iPad popView封装

    仿照UITableView的UITableViewDataSource 协义 1.代理.让代理帮我们类完毕一些方法 2.完毕当前类不能完毕的事情还有传值等功能 实现方法 // 1. 声明一个协议 // ...

  7. Android旋转屏幕后国际化语言失效的解决的方法

    本文已同步至个人博客:liyuyu.cn 近期在项目中使用到了国际化多语言(英文+中文),但在使用时发现了一个问题.当屏幕旋转后.APP语言(中文)自己主动转换为了系统语言(英文).设置了Activi ...

  8. java教程(五)SSH框架-配置

    前言:从这篇博客開始我将继续讲述Java教程:SSH篇.主要内容环绕SSH框架分析与搭建,今天先简介一下SSH的配置. SSH配置顺序是: spring-->hibernate-->str ...

  9. linux系统 硬链接和软链接

    背景: 当几个用户同在一个项目里工作时.经常须要共享文件. 假设一个共享文件同一时候出如今属于不同用户的不同文件夹下.工作起来就非常方便. 比如B和C文件夹下有一文件D是两者都能够訪问和改动的共享文件 ...

  10. DECLARE CURSOR (Transact-SQL)

    Defines the attributes of a Transact-SQL server cursor, such as its scrolling behavior and the query ...