http://www.openedv.com/forum.php?mod=viewthread&tid=50048&highlight=MDK%D3%C3JTAG%2B%B7%C2%D5%E6%C6%F7%CF%C2%D4%D8%B4%FA%C2%EB%CA%B1%A3%AC%CC%E1%CA%BEcannot%2Bload%2Bflash%2Bdevice%2Bdescription%A3%A1%BD%E2%BE%F6%B0%EC%B7%A8…

File : D:\Keil_v5\ARM\PACK\Keil\STM32F0xx_DFP\2.0.0\Keil.STM32F0xx_DFP.pdsc Sequence : CheckID Context : Item #1: <control if="jep106id != 0x20"> Item #0: <block>::Line 2 Expression : " Message(2, "Not a genuine ST Device!…

转载 http://www.corecourse.cn/forum.php?mod=viewthread&tid=28317 在对EPCS读写操作时alt_flash_open_dev(EPCS_NAME);返回的地址一直是0.解决办法:在BSP Editor中取消对 enable_reduced_device_drivers 的勾选…

1.程序烧录方式 1)ST-LINK下载 2)SWD下载 SWD对应的引脚为:GND.RST.SWDIO.SWDCLK SWD与Jlink的比较 3)串口下载 串口下载不能直接在MDK点击Download进行下载,要先生成HEX文件, 再通过第三方烧录软件将HEX文件烧录至芯片里. 2.在程序烧录过程中常遇到的一些问题 1)头文件没有被包含,显示缺失某头文件 解决方法: 2)cannot load flash device description(无法加载flash设备) 解决方法: 3)没有安…

我是生手,对于MDK的理解还很简单.以下内容是遇到的一种情况. 有一个MDK 4工程,要求顺序点亮4个LED灯,工程已经建好. 在MDK 5中打开,编译都没问题,要烧写时,提示"can not load flash device description",一时不知就里.查阅后发现原来是找不到设备. 这个图是找到后的情况,在此之前是NONE. 查找原因,原来是下图中调试器没有选择正确,导致MDK按照设定的调试器找设备找不到.更改为如图所示调试器后,就没有问题了. 当然在点击Setting…

Problem adding USB host device to KVM Windows guest machine. Status: CLOSED CURRENTRELEASE   Aliases: None   Product: Fedora Component: qemu (Show other bugs) Version: 18 Hardware: x86_64 Unspecified   Priority unspecified Severity unspecified Target…

http://technet.microsoft.com/en-us/library/cc756878(v=ws.10).aspx In this section Network Load Balancing Terms and Definitions Network Load Balancing Architecture Network Load Balancing Protocols Application Compatibility with Network Load Balancing…

https://flashdba.com/2014/06/20/understanding-flash-blocks-pages-and-program-erases/ In the last post on this subject I described the invention of NAND flash and the way in which erase operations affect larger areas than write operations. Let’s have…

What does this tool do? The LPC18xx/43xx DFUSec utility is a Windows PC tool that provides support functions for LPC18xx/43xx microcontroller via USB. The tool is composed of 3 components: the Image Programmer, the LPC-Link 2 Configuration Tool, and…

hdparm(8) - Linux man page Name hdparm - get/set SATA/IDE device parameters Synopsis hdparm [ flags ] [device] .. Description   hdparm provides a command line interface to various kernel interfaces supported by the Linux SATA/PATA/SAS "libata" s…