http://www.planetanalog.com/author.asp?section_id=3041&doc_id=563055 Jonathan Harris, Product Applications Engineer, Analog Devices, 6/2/2014 As I thought about where to go with the next blog, I looked over the comments and questions from my previous…

上一次简单的总结了一下DAC方面的知识,好吧,这次再来总结一下ADC方面的东东.ADC即Analog-to-Digital Converter的缩写,指模/数转换器或者模拟/数字转换器.现实世界是由模拟信号组成的,关于为什么要用模数转换器,这大概与现在数字存储技术有关吧,例如温度.压力.声音或者图像等只有转换成数字量才能方便的存储在硬盘.U盘等数码存储介质中,或许某天我们的技术发展了,数字存储可以用某些模拟量存储,也许我们就用不着这么麻烦的转来换去了.好了,闲话不多扯,来简单总结一下ADC的原理…

http://source.android.com/devices/tech/power.html Battery usage information is derived from battery usage statistics and power profile values. Battery Usage Statistics Battery usage statistics are tracked by the framework. This involves keeping track…

The schematic in Figure 1 shows a way to increase the power available from a current-limited 5V supply by adding power from a –5V supply. The dc/dc converter generates a single 12V, 150-mA (1.8W) output from two regulated and current-limited input so…

Engineering labs are usually equipped with various power supplies, voltmeters, function generators, and oscilloscopes. One piece of equipment missing from many such labs, however, is a current source. This omission is unfortunate, because a current s…

目录 STC8H开发(一): 在Keil5中配置和使用FwLib_STC8封装库(图文详解) STC8H开发(二): 在Linux VSCode中配置和使用FwLib_STC8封装库(图文详解) STC8H开发(三): 基于FwLib_STC8的模数转换ADC介绍和演示用例说明 前面介绍了在Keil5和PlatformIO环境下使用FwLib_STC8, 接下来以STC8H系列为主, 结合demo中的演示用例介绍ADC(模数转换) STC8G和STC8H的ADC模数转换 STC8G和STC8H的…

Driver Amplifiers For Analog-To-Digital Converters What amplifiers are used to drive analog-to-digital converters (ADCs)? Possibilities include single-ended and differential inputs and outputs, plus voltage feedback (VFB) or current feedback (CFB) in…

来自scsi标准的官方网站http://t10.org/,具体的文档可以去浏览官方网站. (*) This chart reflects the currently approved SCSI project family. T10 is responsible for all projects, except: IEEE is responsible for IEEE 1394; T11 responsible for Fibre Channel; Internet Engineering T…

http://electronicdesign.com/digital-ics/digital-current-mode-control-challenges-analog-counterparts Digital Current-Mode Control Challenges Analog Counterparts Electronic Design Bryan Kris Thu, 2006-11-16 (All day) Switch-mode power supplies can use…

VDDA为所有的模拟电路部分供电,包括: ADC模块,复位电路,PVD(可编程电压监测器),PLL,上电复位(POR)和掉电复位(PDR)模块,控制VBAT切换的开关等.即使不 使用ADC功能,也需要连接VDDA,强烈建议VDD和VDDA使用同一个电源供电. VDD与VDDA之间的电压差不能超过300mV,VDD与VDDA 应该同时上电或调电. VDDA,VSSA是模拟部分的电源,因为它连接着复位电路,所以这个必须接,否则无法下载代码. Power supply schemes(供电方案) •…