启动apache遇到错误:httpd: Could not reliably determine the server's fully qualified domain name [root@server httpd-2.2.4]# /usr/local/apache/bin/apachectl start httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 f…

今天在调试openstack的时候,重启apache,出现以下报错: [root@hctrl log]# service httpd restart 停止 httpd:[确定] 正在启动 httpd:httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [确定]   在/etc/hosts上折腾了一会,无果. 后来在google和ba…

启动apache遇到错误:httpd: Could not reliably determine the server's fully qualified domain name [root@server httpd-2.2.4]# /usr/local/apache/bin/apachectl start   httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1…

启动apache遇到错误:httpd: Could not reliably determine the server's fully qualified domain name [root@server httpd-2.2.4]# /usr/local/apache/bin/apachectl start httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 f…

apache环境配置 | httpd Could not reliably determine the server's fully qualified domain name    转 https://blog.csdn.net/u012104219/article/details/79853797 前言 作为php开发者,你是否遇到这种情况.经常我们会在Linux系统上通过php do.php命令进行程序调试.有时候明明通过命令行方式调试程序成功后,却发现在浏览器请求我们的www.test.…

[root@localhost httpd-2.4.7]# /usr/local/httpd/bin/apachectl start AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using localhost.localdomain. Set the 'ServerName' directive globally to suppress this message ap…

启动apache遇到提示: [root@bqh-119 conf]# ../bin/apachectl -thttpd: apr_sockaddr_info_get() failed for bqh-119httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerNameSyntax OK[root@bqh-119 conf]# ../bin/ap…

测试Apache服务器: 重启apache: sudo /usr/local/apache/bin/apachectl restart 若出现错误: httpd: Could not reliably determine the server's fully qualified domain name...... 解决办法: 1)进入apache的安装目录:(视个人安装情况而不同) [root@XXXX]# cd /usr/local/apache/conf 2)编辑httpd.conf文件 […

[root@rusky]# service httpd startStarting httpd: httpd: apr_sockaddr_info_get() failed for ruskyhttpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName *********************** 解决方法: 修改httpd.conf配置文…

httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName 解决办法非常简单: #vi /usr/local/apache/conf/httpd.conf 找到#ServerName www.example.com:80   把#去掉,再用bin/apachectl start重启apache即可没事了.…

今天在家里的RHLE5.5上安装apache的时候,先用user1用户./configure命令配置,然后才用root用户make && make install,结果apache起来的时候就报如下错误: httpd: apr_sockaddr_info_get() failed for bogon httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 fo…

httpd: apr_sockaddr_info_get() failed for xxx httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName 在/usr/local/apache2/bin/apachectl start启动Apache服务的时候出现的错误 解决办法 vi /etc/hosts127.0.0.1 localhost…

今天安装Apache httpd web服务器时,从官方网站上http://www.apache.org/dyn/closer.cgi下载httpd,然后在centos下解压,安装过程分为三部分: (1)./configure (2)make (3)make install (需要root权限) 默认安装在/usr/sbin/下,执行apachectl start时候,提示如下错误: httpd: apr_sockaddr_info_get() failed for shiweihttpd: C…

一.解决APR和APR-util错误: 1.1.安装APR: [root@ganglia httpd-2.2.23]# cd srclib/apr [root@ganglia apr]# ./configure --prefix=/usr/local/apr root@ganglia apr]# make && make install 1.2.安装APR-util: [root@ganglia apr]# cd ../apr-util/ [root@ganglia apr-util]#…

今天启动apache查看状态发现报错,说不能确认服务器完全确认域名,以下是报错内容: [root@localhost ~]# service httpd status Redirecting to /bin/systemctl status httpd.service ● httpd.service - The Apache HTTP Server Loaded: loaded (/usr/lib/systemd/system/httpd.service; disabled; vendor pr…

启动apache提示 : apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName ... waiting apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName (1)…

启动apache的时候,报告以下消息提示: Starting httpd: httpd: Could not reliably determine the server's fully qualified domain name 修改方法: vi /etc/httpd/conf/httpd.conf #添加以下内容 ServerName localhost:…

#service httpd start #Starting httpd: httpd: Could not reliably determine the server's fully qualified domain name, using 192.168.1.123 for ServerName 解决办法:vi /etc/httpd/conf/httpd.conf   加入一句  ServerName  localhost:80…

作者:Younger Liu, 本作品采用知识共享署名-非商业性使用-相同方式共享 3.0 未本地化版本许可协议进行许可. 问题描述: AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1. Set the 'ServerName' directive globally to suppress this message 解决方案: vi /etc…

[root@luozhonghua sbin]# service httpd start Starting httpd: httpd: apr_sockaddr_info_get() failed for luozhonghua httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName (98)Address already in use…

xampp启动时显示的错误为: 10:40:18 [Apache] Error: Apache shutdown unexpectedly.10:40:18 [Apache] This may be due to a blocked port, missing dependencies, 10:40:18 [Apache] improper privileges, a crash, or a shutdown by another method.10:40:18 [Apache] Press t…

APACHE启动成功,但无法接受任何请求,查看ERROR.LOG文件[warn] pid file /opt/apache/logs/httpd.pid overwritten - Unclean shutdown of previous Apache run?大概意思是说PID文件一直被一个程序改写,我测试系统上还运行了RESIN,只要停止了就可以了 resin/bin/httpd.sh stop resin/bin/httpd.sh stop resin/bin/httpd.sh stop…

1.通过vi打开apache的配置文件httpd.conf > vi /data/apache/conf/httpd.conf 2.找到#ServerName www.example.com:80这行,去掉前面的#号,修改如下: ServerName localhost:80 或者 ServerName 127.0.0.1:80…

wamp开启SSL解决wamp5_1.7.4中APACHE启动问题 1.#修改httpd.conf文件LoadModule ssl_module modules/mod_ssl.soInclude conf/extra/httpd-ssl.conf#去掉上面两行前的"#"2.#修改conf/extra/httpd-ssl.confSSLCertificateFile "D:/wamp/Apache2/bin/server.crt"SSLCertificateKeyF…

打开localhost显示以下错误 原因:之前我配置了虚拟主机,所以服务器是从虚拟环境访问的,localhost也就访问不到 解决方法:打开httpd.conf配置文件,将Include conf/extra/httpd-vhosts.conf改为#Include conf/extra/httpd-vhosts.conf(下次配置虚拟主机的时候要重新打开这个选项) 原文地址:http://www.wanysys.cc/coding/php/800.html…

ttpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName 解决办法非常简单: #vim /web/apache/conf/httpd.conf (在这里/web/apahce是我安装apache的目录,你默认安装的话应该是/usr/local/apache2/icons) 找到#ServerName www.example.com:80  …

问题原因: httpd服务配置文件,并没有设置解析根地址,无法可靠地确定服务器的完全合格的域名 如何解决? httpd的配置文件放在 /etc/httpd/conf/目录下,去掉ServerName注释,并把www.example.com:80替换成 127.0.0.1:80 cat httpd.conf |grep 'ServerName' # 查询域名设置 sed 's@#ServerName www.example.com:80@ServerName 127.0.0.1:80@g' htt…

1)进入apache的安装目录:(视个人安装情况而不同) [root@server ~]# cd /usr/local/apache/conf 2)编辑httpd.conf文件,搜索"#ServerName",添加ServerName localhost:80 [root@server conf]# ls extra  httpd.conf  magic  mime.types  original [root@server conf]# vi httpd.conf #ServerNam…

错误描述: make_sock: could not bind to address [::]:443 G:\Apache24\bin>httpd.exe -w -n "Apache2.4" -k start(OS 10048)通常每个套接字地址(协议/网络地址/端口)只允许使用一次. : AH00072: make_sock: could not bind to address [::]:443(OS 10048)通常每个套接字地址(协议/网络地址/端口)只允许使用一次. :…

Q:Windows环境下启动apache报错如下: 可是在httpd.conf文件中apache listen的明明是http 80端口,为什么会报443的错误? A:因为你的计算机安装了VM,所有有个vm的进程一直占用着443端口,在命令行下netstat -ano查到那个进程的pid后打开任务管理器把进程干掉,然后重启就好了. 注:命令行下如何杀死进程? ①taskkill /im 进程名称 示例:用taskkill /im VStart.exe命令关闭音速启动,VStart.exe就是音速…