USART列子

#include "stm32f10x.h"

 void USART_INit(void)
 {

     GPIO_InitTypeDef GPIO_Initstructe;
     USART_InitTypeDef USART_Initstructe;
     NVIC_InitTypeDef NVIC_Initstructe;

     RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
     RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);

     GPIO_Initstructe.GPIO_Mode= GPIO_Mode_AF_PP;
     GPIO_Initstructe.GPIO_Pin=GPIO_Pin_9;
     GPIO_Initstructe.GPIO_Speed=GPIO_Speed_50MHz;
     GPIO_Init(GPIOA,&GPIO_Initstructe);

     GPIO_Initstructe.GPIO_Mode= GPIO_Mode_IN_FLOATING;
     GPIO_Initstructe.GPIO_Pin=GPIO_Pin_10;
     GPIO_Init(GPIOA,&GPIO_Initstructe);

     USART_Initstructe.USART_BaudRate= ;
     USART_Initstructe.USART_HardwareFlowControl=USART_HardwareFlowControl_None;
     USART_Initstructe.USART_Mode=USART_Mode_Rx|USART_Mode_Tx;
     USART_Initstructe.USART_Parity=USART_Parity_No;
     USART_Initstructe.USART_StopBits=USART_StopBits_1;
     USART_Initstructe.USART_WordLength=USART_WordLength_8b;
     USART_Init(USART1,&USART_Initstructe);

     NVIC_Initstructe.NVIC_IRQChannel=USART1_IRQn;
     NVIC_Initstructe.NVIC_IRQChannelCmd=ENABLE;
     NVIC_Initstructe.NVIC_IRQChannelPreemptionPriority=;
     NVIC_Initstructe.NVIC_IRQChannelSubPriority=;
     NVIC_Init(&NVIC_Initstructe);

     USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
     USART_Cmd(USART1, ENABLE);

 }

 void USART1_IRQHandler(void)
 {
     u8 res;
     if(USART_GetITStatus(USART1, USART_IT_RXNE))
     {
        res = USART_ReceiveData(USART1);
         USART_SendData(USART1,res);
     }

 }

 int main(void)
{

    NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);
    USART_INit();
    while();

}