Zabbix——设置模板

前提条件：

1. Zabbix版本为4.0
2. 可以正常使用Server

1. 添加H3C网络交换机的CPU和内存模板，并配置自动发现。

注意，需要添加完成后，重新进行搜索后再此进入才有下列选项。

添加CPU的自动发现：

名称：CPU Discovery
键值：cpu.discovery
SNMP OID：discovery[{#SNMPVALUE},1.3.6.1.4.1.25506.2.6.1.1.1.1.6]
SNMP community：{$SNMP_COMMUNITY}
描述：
If your IOS device has several CPUs, you must use CISCO-PROCESS-MIB and its object cpmCPUTotal5minRev from the table called cpmCPUTotalTable ,
indexed with cpmCPUTotalIndex .
This table allows CISCO-PROCESS-MIB to keep CPU statistics for different physical entities in the router,
like different CPU chips, group of CPUs, or CPUs in different modules/cards.
In case of a single CPU, cpmCPUTotalTable has only one entry.

设置CPU的监控项原型：

名称：{#SNMPVALUE}: CPU utilization
键值：system.cpu.util[cpmCPUTotal5min.{#SNMPINDEX}]
SNMP OID：1.3.6.1.4.1.25506.2.6.1.1.1.1.6.{#SNMPINDEX}
SNMP community：{$SNMP_COMMUNITY}
单位：%
更新间隔：1m
灵活调度：50s
描述
MIB: CISCO-PROCESS-MIB
The overall CPU busy percentage in the last 5 minute
period. This object deprecates the avgBusy5 object from
the OLD-CISCO-SYSTEM-MIB. This object is deprecated
by cpmCPUTotal5minRev which has the changed range
of value (0..100)
Reference: http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/15215-collect-cpu-util-snmp.html

创建触发器原型

名称：{#SNMPVALUE}: High CPU utilization
表达式：{Template H3C SW CPU_Memory:system.cpu.util[cpmCPUTotal5min.{#SNMPINDEX}].avg(5m)}>{$CPU_UTIL_MAX}

创建图形原型

添加内存自动发现：

名称：Memory Discovery
键值：memory.discovery
SNMP OID：discovery[{#SNMPVALUE},1.3.6.1.4.1.25506.2.6.1.1.1.1.8]
SNMP community：{$SNMP_COMMUNITY}
描述
If your IOS device has several CPUs, you must use CISCO-PROCESS-MIB and its object cpmCPUTotal5minRev from the table called cpmCPUTotalTable ,
indexed with cpmCPUTotalIndex .
This table allows CISCO-PROCESS-MIB to keep CPU statistics for different physical entities in the router,
like different CPU chips, group of CPUs, or CPUs in different modules/cards.
In case of a single CPU, cpmCPUTotalTable has only one entry.

新建监控项原型：

名称：{#SNMPVALUE}: MEM utilization
键值：system.memory.util[cpmCPUTotal5min.{#SNMPINDEX}]
SNMP OID：1.3.6.1.4.1.25506.2.6.1.1.1.1.8.{#SNMPINDEX}
SNMP community：{$SNMP_COMMUNITY}

添加触发器原型：

名称：{#SNMPVALUE}: High MEM utilization1
表达式：{Template H3C SW CPU_Memory:system.memory.util[cpmCPUTotal5min.{#SNMPINDEX}].avg(5m)}>{$MEM_UTIL_MAX}

添加图形原件：

名称：{#SNMPVALUE}: MEM utilization

手动关联某一种模板：

1. 创建模板,关联群组

2. 设置应用集

3. 设置监控项

4. 添加图形