php7.3编译安装 支持微擎2.0

再次整理

//一下配置在命令粘贴时注意句尾加 \ , 在 \ 后不能有空格，不然会自动执行，相当于回车

./configure --prefix=/usr/local/php \
--with-config-file-path=/usr/local/php \
--enable-fpm \
--with-fpm-user=www \
--with-fpm-group=www \
--enable-embedded-mysqli \
--with-curl=/usr \
--with-openssl-dir=/usr \
--with-gd \
--with-libxml-dir=/usr \
--with-mysql-sock=SOCKPATH 

with-pdo-dblib

编译时：virtual memory exhausted: Cannot allocate memor

ext/iconv/.libs/iconv.o: In function `php_iconv_stream_filter_ctor':
/home/king/php-5.2.13/ext/iconv/iconv.c:2491: undefined reference to `libiconv_open'
collect2: ld returned 1 exit status
make: *** [sapi/cli/php] Error 1
[root@test php-5.2.13]# vi Makefile

在安裝 PHP 到系统中时要是发生「undefined reference to libiconv_open'」之类的错误信息，那表示在「./configure 」沒抓好一些环境变数值。错误发生点在建立「-o sapi/cli/php」是出错，没給到要 link 的 iconv 函式库参数。 解决方法：编辑Makefile 大约77 行左右的地方: EXTRA_LIBS = ..... -lcrypt 在最后加上 -liconv，例如: EXTRA_LIBS = ..... -lcrypt -liconv 然后重新再次 make 即可。

或者用另一种办法

make ZEND_EXTRA_LIBS='-liconv'

ln -s /usr/local/lib/libiconv.so.2 /usr/lib64/

作者用的第一种办法解决的,编译好Makefile后，记得先make clean一下，再make，不然会报错

[root@third php-7.3.6]# make install
Installing shared extensions:     /usr/local/php/lib/php/extensions/no-debug-non-zts-20180731/
Installing PHP CLI binary:        /usr/local/php/bin/
Installing PHP CLI man page:      /usr/local/php/php/man/man1/
Installing PHP FPM binary:        /usr/local/php/sbin/
Installing PHP FPM defconfig:     /usr/local/php/etc/
Installing PHP FPM man page:      /usr/local/php/php/man/man8/
Installing PHP FPM status page:   /usr/local/php/php/php/fpm/
Installing phpdbg binary:         /usr/local/php/bin/
Installing phpdbg man page:       /usr/local/php/php/man/man1/
Installing PHP CGI binary:        /usr/local/php/bin/
Installing PHP CGI man page:      /usr/local/php/php/man/man1/
Installing build environment:     /usr/local/php/lib/php/build/
Installing header files:          /usr/local/php/include/php/
Installing helper programs:       /usr/local/php/bin/
  program: phpize
  program: php-config
Installing man pages:             /usr/local/php/php/man/man1/
  page: phpize.1
  page: php-config.1
Installing PEAR environment:      /usr/local/php/lib/php/
[PEAR] Archive_Tar    - installed: 1.4.7
[PEAR] Console_Getopt - installed: 1.4.2
[PEAR] Structures_Graph- installed: 1.1.1
[PEAR] XML_Util       - installed: 1.4.3
[PEAR] PEAR           - installed: 1.10.9
Wrote PEAR system config file at: /usr/local/php/etc/pear.conf
You may want to add: /usr/local/php/lib/php to your php.ini include_path
/usr/local/src/php-7.3.6/build/shtool install -c ext/phar/phar.phar /usr/local/php/bin
ln -s -f phar.phar /usr/local/php/bin/phar
Installing PDO headers:           /usr/local/php/include/php/ext/pdo/
[root@third php-7.3.6]# php -v
-bash: php: command not found
[root@third php-7.3.6]# php-fpm -v
-bash: php-fpm: command not found
[root@third php-7.3.6]#

ERROR: unable to bind listening socket for address ’127

 

ERROR: unable to bind listening socket for address ’127.0.0.1:9000′

解决办法：

killall php-fpm

然后重启即可。

我的PHP安装目录这样重启    /usr/local/php/sbin/php-fpm

6，安装：

make

make install

7,关于配置：

cp php.ini-development /usr/local/php7/etc/php.ini
cp /usr/local/php7/etc/php-fpm.conf.default /usr/local/php7/etc/php-fpm.conf
cp /usr/local/php7/etc/php-fpm.d/www.conf.default /usr/local/php7/etc/php-fpm.d/www.conf
8，加个权限：

chmod +x /etc/init.d/php-fpm

现在试一下，/etc/init.d/php-fpm start

如果php启动成功了，那你很幸福；如果失败了，接着往下看。

大概出现的是下图这个情况吧？

再试一下运行提示的命令，出的问题是ERROR:FPM initialization failed.如下图：

所以出问题的是php-fpm，机智如我，把我另一个虚拟机（centOS7）上的php-fpm给换上去了，只需要把php的安装根目录按照自己的情况改一下就成了（就是这一行：prefix=/usr/local/php）。现在我就无私的把我的php-fpm文件奉献出来。

#! /bin/sh

### BEGIN INIT INFO
# Provides:          php-fpm
# Required-Start:    $remote_fs $network
# Required-Stop:     $remote_fs $network
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: starts php-fpm
# Description:       starts the PHP FastCGI Process Manager daemon
### END INIT INFO

prefix=/usr/local/php
exec_prefix=${prefix}

php_fpm_BIN=${exec_prefix}/sbin/php-fpm
php_fpm_CONF=${prefix}/etc/php-fpm.conf
php_fpm_PID=${prefix}/var/run/php-fpm.pid

php_opts="--fpm-config $php_fpm_CONF --pid $php_fpm_PID"

wait_for_pid () {
    try=0

while test $try -lt 35 ; do

case "$1" in
            'created')
            if [ -f "$2" ] ; then
                try=''
                break
            fi
            ;;

'removed')
            if [ ! -f "$2" ] ; then
                try=''
                break
            fi
            ;;
        esac

echo -n .
        try=`expr $try + 1`
        sleep 1

done

}

case "$1" in
    start)
        echo -n "Starting php-fpm "

$php_fpm_BIN --daemonize $php_opts

if [ "$?" != 0 ] ; then
            echo " failed"
            exit 1
        fi

wait_for_pid created $php_fpm_PID

if [ -n "$try" ] ; then
            echo " failed"
            exit 1
        else
            echo " done"
        fi
    ;;

stop)
        echo -n "Gracefully shutting down php-fpm "

if [ ! -r $php_fpm_PID ] ; then
            echo "warning, no pid file found - php-fpm is not running ?"
            exit 1
        fi

kill -QUIT `cat $php_fpm_PID`

wait_for_pid removed $php_fpm_PID

if [ -n "$try" ] ; then
            echo " failed. Use force-quit"
            exit 1
        else
            echo " done"
        fi
    ;;

status)
        if [ ! -r $php_fpm_PID ] ; then
            echo "php-fpm is stopped"
            exit 0
        fi

PID=`cat $php_fpm_PID`
        if ps -p $PID | grep -q $PID; then
            echo "php-fpm (pid $PID) is running..."
        else
            echo "php-fpm dead but pid file exists"
        fi
    ;;

force-quit)
        echo -n "Terminating php-fpm "

if [ ! -r $php_fpm_PID ] ; then
            echo "warning, no pid file found - php-fpm is not running ?"
            exit 1
        fi

kill -TERM `cat $php_fpm_PID`

wait_for_pid removed $php_fpm_PID

if [ -n "$try" ] ; then
            echo " failed"
            exit 1
        else
            echo " done"
        fi
    ;;

restart)
        $0 stop
        $0 start
    ;;

reload)

echo -n "Reload service php-fpm "

if [ ! -r $php_fpm_PID ] ; then
            echo "warning, no pid file found - php-fpm is not running ?"
            exit 1
        fi

kill -USR2 `cat $php_fpm_PID`

echo " done"
    ;;

configtest)
        $php_fpm_BIN -t
    ;;

*)
        echo "Usage: $0 {start|stop|force-quit|restart|reload|status|configtest}"
        exit 1
    ;;

esac

配置php到nginx

server

{

listen 80; # 端口号

server_name demo.gysr.top; # 域名

index index.html index.htm index.php;

root /web/demo.gysr.top; #j项目的入口文件夹

location ~ /.svn/ {

deny all;

}

location / {

rewrite ^/$ /index.php last;

rewrite ^/(?!index\.php|index\.html|layui|css|js|bootstrap|robots\.txt)(.*)$ /index.php/$1 last;

}

location ~ \.php {

fastcgi_pass 127.0.0.1:9000;

fastcgi_index index.php;

fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;

include fastcgi_params;

}

location ~/uploads/.*\.(php|php5)?$ {

deny all;

}

location ~/public/.*\.(php|php5)?$ {

deny all;

}

location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)$

{

expires 30d;

}

location ~ .*\.(js|css)?$

{

expires 8d;

}

#access_log /www/logs/access.log main;

#

}