我本地虚拟机配置了两台centos机器，分别安装了elasticsearch6.4.0版本，IP分别为：192.168.56.12， 192.168.56.13

分别修改两个机器上Elasticsearch的配置文件:

文件位置：elasticsearch安装目录/elasticsearch-6.4.0/config/elasticsearch.yml

我本地配置文件位置：/usr/local/elasticsearch-6.4.0/config、elasticsearch,yml

192.168.56.12机器配置文件信息如下：

 # ======================== Elasticsearch Configuration =========================

 #

 # NOTE: Elasticsearch comes with reasonable defaults for most settings.

 #       Before you set out to tweak and tune the configuration, make sure you

 #       understand what are you trying to accomplish and the consequences.

 #

 # The primary way of configuring a node is via this file. This template lists

 # the most important settings you may want to configure for a production cluster.

 #

 # Please consult the documentation for further information on configuration options:

 # https://www.elastic.co/guide/en/elasticsearch/reference/index.html

 #

 # ---------------------------------- Cluster -----------------------------------

 #

 # Use a descriptive name for your cluster:

 #

 cluster.name: my-application

 #

 # ------------------------------------ Node ------------------------------------

 #

 # Use a descriptive name for the node:

 #

 node.name: node-1

 #

 # Add custom attributes to the node:

 #

 #node.attr.rack: r1

 #

 # ----------------------------------- Paths ------------------------------------

 #

 # Path to directory where to store the data (separate multiple locations by comma):

 #

 #path.data: /path/to/data

 #

 # Path to log files:

 #

 #path.logs: /path/to/logs

 #

 # ----------------------------------- Memory -----------------------------------

 #

 # Lock the memory on startup:

 #

 #bootstrap.memory_lock: true

 #

 # Make sure that the heap size is set to about half the memory available

 # on the system and that the owner of the process is allowed to use this

 # limit.

 #

 # Elasticsearch performs poorly when the system is swapping the memory.

 #

 # ---------------------------------- Network -----------------------------------

 #

 # Set the bind address to a specific IP (IPv4 or IPv6):

 #

 network.host: 192.168.56.12

 #

 # Set a custom port for HTTP:

 #

 http.port: 9200

 #

 # For more information, consult the network module documentation.

 #

 # --------------------------------- Discovery ----------------------------------

 #

 # Pass an initial list of hosts to perform discovery when new node is started:

 # The default list of hosts is ["127.0.0.1", "[::1]"]

 #

 discovery.zen.ping.unicast.hosts: ["192.168.56.12"]

 #

 # Prevent the "split brain" by configuring the majority of nodes (total number of master-eligible nodes / 2 + 1):

 #

 #discovery.zen.minimum_master_nodes:

 #

 # For more information, consult the zen discovery module documentation.

 #

 # ---------------------------------- Gateway -----------------------------------

 #

 # Block initial recovery after a full cluster restart until N nodes are started:

 #

 #gateway.recover_after_nodes: 3

 #

 # For more information, consult the gateway module documentation.

 #

 # ---------------------------------- Various -----------------------------------

 #

 # Require explicit names when deleting indices:

 #

 #action.destructive_requires_name: true

 http.cors.enabled: true

 http.cors.allow-origin: "*"

192.268.56.13机器配置文件信息如下：

 # ======================== Elasticsearch Configuration =========================

 #

 # NOTE: Elasticsearch comes with reasonable defaults for most settings.

 #       Before you set out to tweak and tune the configuration, make sure you

 #       understand what are you trying to accomplish and the consequences.

 #

 # The primary way of configuring a node is via this file. This template lists

 # the most important settings you may want to configure for a production cluster.

 #

 # Please consult the documentation for further information on configuration options:

 # https://www.elastic.co/guide/en/elasticsearch/reference/index.html

 #

 # ---------------------------------- Cluster -----------------------------------

 #

 # Use a descriptive name for your cluster:

 #

 cluster.name: my-application

 #

 # ------------------------------------ Node ------------------------------------

 #

 # Use a descriptive name for the node:

 #

 node.name: node-2

 #

 # Add custom attributes to the node:

 #

 #node.attr.rack: r1

 #

 # ----------------------------------- Paths ------------------------------------

 #

 # Path to directory where to store the data (separate multiple locations by comma):

 #

 #path.data: /path/to/data

 #

 # Path to log files:

 #

 #path.logs: /path/to/logs

 #

 # ----------------------------------- Memory -----------------------------------

 #

 # Lock the memory on startup:

 #

 #bootstrap.memory_lock: true

 #

 # Make sure that the heap size is set to about half the memory available

 # on the system and that the owner of the process is allowed to use this

 # limit.

 #

 # Elasticsearch performs poorly when the system is swapping the memory.

 #

 # ---------------------------------- Network -----------------------------------

 #

 # Set the bind address to a specific IP (IPv4 or IPv6):

 #

 network.host: 192.168.56.13

 #

 # Set a custom port for HTTP:

 #

 http.port: 9200

 #

 # For more information, consult the network module documentation.

 #

 # --------------------------------- Discovery ----------------------------------

 #

 # Pass an initial list of hosts to perform discovery when new node is started:

 # The default list of hosts is ["127.0.0.1", "[::1]"]

 #

 discovery.zen.ping.unicast.hosts: ["192.168.56.12"]

 #

 # Prevent the "split brain" by configuring the majority of nodes (total number of master-eligible nodes / 2 + 1):

 #

 #discovery.zen.minimum_master_nodes:

 #

 # For more information, consult the zen discovery module documentation.

 #

 # ---------------------------------- Gateway -----------------------------------

 #

 # Block initial recovery after a full cluster restart until N nodes are started:

 #

 #gateway.recover_after_nodes: 3

 #

 # For more information, consult the gateway module documentation.

 #

 # ---------------------------------- Various -----------------------------------

 #

 # Require explicit names when deleting indices:

 #

 #action.destructive_requires_name: true

 http.cors.enabled: true

 http.cors.allow-origin: "*"

这里两台机器的cluster.name必须一致 这样才算一个集群

node.name节点名称每台取不同的名称，用来表示不同的集群节点

network.host配置成自己的局域网IP

http.port端口就固定9200

discovery.zen.ping.unicast.hosts主动发现节点我们都配置成192.168.56.12节点IP

配置完后 重启es服务；

然后在head插件中查看：

访问正常，存在两个node节点，集群配置成功！

ElasticSearch（十）：Elasticsearch集群配置的更多相关文章

  1. Elasticsearch分布式搜索集群配置

    配置文件位于%ES_HOME%/config/elasticsearch.yml文件中,用Editplus打开它,你便可以进行配置.   所有的配置都可以使用环境变量,例如:node.rack: ${ ...

  2. Elasticsearch 安装与集群配置

    一.软件版本 操作系统:CentOS-6.5-x86_64 ES版本:5.0 主机:192.168.63.246 主机: 192.168.63.242 二.部署环境规划:   1. 需求:jdk版本: ...

  3. elasticsearch集群配置 (Tobe Continue)

    elasticsearch集群配置 (Tobe Continue)   准备 首先需要在每个节点有可以正常启动的单节点elasticsearch   elasticsearch集群配置仅需要在elas ...

  4. Ubuntu 14.04中Elasticsearch集群配置

    Ubuntu 14.04中Elasticsearch集群配置 前言:本文可用于elasticsearch集群搭建参考.细分为elasticsearch.yml配置和系统配置 达到的目的:各台机器配置成 ...

  5. ES2：ElasticSearch 集群配置

    ElasticSearch共有两个配置文件,都位于config目录下,分别是elasticsearch.yml和logging.yml,其中,elasticsearch.yml 用来配置Elastic ...

  6. ElasticSearch入门 第二篇：集群配置

    这是ElasticSearch 2.4 版本系列的第二篇: ElasticSearch入门 第一篇:Windows下安装ElasticSearch ElasticSearch入门 第二篇:集群配置 E ...

  7. ELK系列七：Elasticsearch的集群配置和监控以及在部署ELK中踩的坑

    1.基本下载安装 #按照ELK系列一博客安装启动即可,没有大坑,注意一下权限即可 chmod -R 777 ./elasticsearch #此外没有java的,注意安装下JDK,我这次部署的环境是C ...

  8. Elasticsearch 第九篇：集群配置与搭建

    h2.post_title { background-color: rgba(43, 102, 149, 1); color: rgba(255, 255, 255, 1); font-size: 1 ...

  9. 原创 | 手摸手带您学会 Elasticsearch 单机、集群、插件安装(图文教程)

    欢迎关注笔者的公众号: 小哈学Java, 每日推送 Java 领域干货文章,关注即免费无套路附送 100G 海量学习.面试资源哟!! 个人网站: https://www.exception.site/ ...

随机推荐

  1. Mac下进入MySQL命令行

    /usr/local/MySQL/bin/mysql -u root -p 其中,root为数据库用户名

  2. [Go] 数据类型，变量与变量作用域，常量

    // var.gopackage main import ( "fmt" ) func main() { // 声明变量的一般形式是使用 var 关键字,可以一次声明多个变量 // ...

  3. php删除目录及目录下的内容

    今天遇到一个问题: java写的API,ppt转图片生成的目录和文件 在使用php调用API完成后,再使用php进行删除时,遇到了删除失败的问题 部署的环境是Ubuntu 导致删除失败的原因是权限的问 ...

  4. QT+OPENCV实现录屏功能

    本文使用QT+opencv来实现对指定窗体画面录制,并保存为avi文件. (1)获取窗体界面 QScreen类有一个grabWindow函数,可以用来获取窗体的画面,这个函数使用很简单,就是传入窗体句 ...

  5. Emiya 家今天的饭

    \(dp_{i,j,k}\)表示前\(i\)种烹饪方法,假设最多的是食材\(j\),食材\(j\)比其他食材多\(k\)次出现 其中\(i \in [1,n],j \in [1,m],k \in [- ...

  6. 使用echarts绘制条形图和扇形图

    使用echarts绘制条形图和扇形图 简单举例说明下echarts如何绘制条形图和扇形图 代码示例 <!doctype html> <html lang="en" ...

  7. canal使用

    报错信息:com.alibaba.druid.pool.DruidDataSource - testWhileIdle is true, validationQuery not set 解决方法: 找 ...

  8. Windows下同时安装了Python2与Python3时如何使用RobotFrameWork

    由于windows下不能像linux那样指定python文件的运行路径,当电脑中即安装了python2,又安装了python3时,也不能在环境变量中都配置运行路径吧(当然是可以配置的,系统会按照靠前的 ...

  9. 一秒可生成500万ID的分布式自增ID算法—雪花算法 (Snowflake，Delphi 版)

    概述 分布式系统中,有一些需要使用全局唯一ID的场景,这种时候为了防止ID冲突可以使用36位的UUID,但是UUID有一些缺点,首先他相对比较长,另外UUID一般是无序的. 有些时候我们希望能使用一种 ...

  10. linux 挂载新的硬盘

    linux 挂载新的硬盘 1.查看硬盘情况,物理盘和分区 fdisk -l 2.分区一个盘,sdb是个还没有分区的硬盘 fdisk /dev/sdb 输入 n p 1 w n 表示新建分区 p 表示分 ...