在CentOS上源码安装Nginx
总步骤:
wget http://nginx.org/download/nginx-1.10.1.tar.gz
tar -xvf nginx-1.10.1.tar.gz
cd nginx-1.10.1
./configrue
make
make install
在configure中可能遇到的问题:
(1) ./configure: error: the HTTP rewrite module requires the PCRE library. You can either disable the module by using --without-http_rewrite_module option, or install the PCRE library into the system, or build the PCRE library statically from the source with nginx by using --with-pcre= option.
解决办法:安装pcre-devel
yum -y install pcre-devel
(2) ./configure: error: the HTTP gzip module requires the zlib library. You can either disable the module by using --without-http_gzip_module option, or install the zlib library into the system, or build the zlib library statically from the source with nginx by using --with-zlib= option.
解决办法:安装zlib-devel
yum install -y zlib-devel
完成configure后得到的Configuration summary:
Configuration summary
using system PCRE library
OpenSSL library is not used
using builtin md5 code
sha1 library is not found
using system zlib library
nginx path prefix: "/usr/local/nginx"
nginx binary file: "/usr/local/nginx/sbin/nginx"
nginx modules path: "/usr/local/nginx/modules"
nginx configuration prefix: "/usr/local/nginx/conf"
nginx configuration file: "/usr/local/nginx/conf/nginx.conf"
nginx pid file: "/usr/local/nginx/logs/nginx.pid"
nginx error log file: "/usr/local/nginx/logs/error.log"
nginx http access log file: "/usr/local/nginx/logs/access.log"
nginx http client request body temporary files: "client_body_temp"
nginx http proxy temporary files: "proxy_temp"
nginx http fastcgi temporary files: "fastcgi_temp"
nginx http uwsgi temporary files: "uwsgi_temp"
nginx http scgi temporary files: "scgi_temp"
顺便说一下yum安装 Nginx
Nginx 官方文档: http://nginx.org/en/linux_packages.html
To set up the yum repository for RHEL/CentOS, create the file named /etc/yum.repos.d/nginx.repo with the following contents:
[nginx]
name=nginx repo
baseurl=http://nginx.org/packages/OS/OSRELEASE/$basearch/
gpgcheck=0
enabled=1
Replace “OS” with “rhel” or “centos”, depending on the distribution used, and “OSRELEASE” with “5”, “6”, or “7”, for 5.x, 6.x, or 7.x versions, respectively.
创建好yum源后,直接使用yum 安装即可:
yum install nginx
Configure arguments common for nginx binaries from pre-built packages:
--prefix=/etc/nginx
--sbin-path=/usr/sbin/nginx
--conf-path=/etc/nginx/nginx.conf
--error-log-path=/var/log/nginx/error.log
--http-log-path=/var/log/nginx/access.log
--pid-path=/var/run/nginx.pid
--lock-path=/var/run/nginx.lock
--http-client-body-temp-path=/var/cache/nginx/client_temp
--http-proxy-temp-path=/var/cache/nginx/proxy_temp
--http-fastcgi-temp-path=/var/cache/nginx/fastcgi_temp
--http-uwsgi-temp-path=/var/cache/nginx/uwsgi_temp
--http-scgi-temp-path=/var/cache/nginx/scgi_temp
--user=nginx
--group=nginx
--with-http_ssl_module
--with-http_realip_module
--with-http_addition_module
--with-http_sub_module
--with-http_dav_module
--with-http_flv_module
--with-http_mp4_module
--with-http_gunzip_module
--with-http_gzip_static_module
--with-http_random_index_module
--with-http_secure_link_module
--with-http_stub_status_module
--with-http_auth_request_module
--with-threads
--with-stream
--with-stream_ssl_module
--with-http_slice_module
--with-mail
--with-mail_ssl_module
--with-file-aio
--with-http_v2_module
--with-ipv6
Nginx Starting, Stopping, and Reloading Configuration
http://nginx.org/en/docs/beginners_guide.html#control
To start nginx, run the executable file. Once nginx is started, it can be controlled by invoking the executable with the -s parameter. Use the following syntax:
nginx -s signal
Where signal may be one of the following:
- stop — fast shutdown
- quit — graceful shutdown
- reload — reloading the configuration file
- reopen — reopening the log files
For example, to stop nginx processes with waiting for the worker processes to finish serving current requests, the following command can be executed:
nginx -s quit
This command should be executed under the same user that started nginx.
Changes made in the configuration file will not be applied until the command to reload configuration is sent to nginx or it is restarted. To reload configuration, execute:
nginx -s reload
如果您觉得阅读本文对您有帮助,欢迎转载本文,但是转载文章之后必须在文章页面明显位置保留此段声明,否则保留追究法律责任的权利。
作 者:blog.jpdou.top
在CentOS上源码安装Nginx的更多相关文章
- centos上源码安装clang 3.8
之前想在centos系统上安装clang 3.6版本,由于yum上版本太低,想通过源码编译安装.按照网上说的源码安装步骤,下好llvm.clang.clang-tools-extra和compiler ...
- 源码安装nginx以及平滑升级
源码安装nginx以及平滑升级 ...
- 在 CentOS 下源码安装 Xen
http://www.vpsee.com/2010/04/install-xen-on-centos-from-source/ 在 CentOS 源码编译安装 Xen 的过程和在 Debian 上编译 ...
- 源码安装nginx 方法二
yum 仓库不能用大写字母 [root@oldboy conf.d]# gzip * 压缩当前目录下的所有文件 gzip ./* gzip . gzip./ # 关闭防火墙和selinux [root ...
- CentOS下源码安装Apache2.4+PHP5.4+MySQL5.5
一.准备(把所有的源文件放在‘/home/yuanjun’目录下) apr http://mirror.bjtu.edu.cn/apache/apr/apr-1.4.6.tar.gz apr-util ...
- Linux之源码安装nginx,并按照作业一描述的那样去测试使用
作业五:源码安装nginx,并按照作业一描述的那样去测试使用 [root@localhost nginx]# yum install gcc-* glibc-* openssl openssl-dev ...
- 源码安装Nginx以及用systemctl管理
一.源码安装Nginx: 先安装gcc编译器(安装过的可以忽略) [root@localhost ~]# yum -y install gcc gcc-c++ wget 进入src目录 [root@l ...
- linux源码安装nginx
任务目标:源码安装nginx,作为web服务修改配置文件,让配置生效,验证配置 首先要去官网nginx.org下载一个tar包: tar xvf 解包 进入到解包出来的目录,对configure进行配 ...
- 工作笔记-- 源码安装nginx
源码安装nginx 1.安装nginx的依赖包 [root@localhost ~]# yum -y install gcc gcc-c++ openssl openssl-devel pcre pc ...
随机推荐
- BZOJ4889:[TJOI2017]不勤劳的图书管理员
浅谈树状数组与线段树:https://www.cnblogs.com/AKMer/p/9946944.html 题目传送门:https://www.lydsy.com/JudgeOnline/prob ...
- BZOJ3938:Robot
浅谈标记永久化:https://www.cnblogs.com/AKMer/p/10137227.html 题目传送门:https://www.lydsy.com/JudgeOnline/proble ...
- bzoj 2865 字符串识别 —— 后缀数组
题目:https://www.lydsy.com/JudgeOnline/problem.php?id=2865 唯一出现的子串就是每个后缀除去和别的后缀最长的 LCP 之外的前缀: 所以用这个更新一 ...
- request实现请求转发
ServletContext可以实现请求转发,request也可以. 在forward之前输入到response缓冲区中的数据,如果已经被发送到了客户端,forward将失败,抛出异常 在forwar ...
- Swiper 滑动切换图片(可用于PC端,移动端)
作为一名后端的普通程序猿, 你让我搞这种前端不是跟我玩命吗,所以用插件来搞,省事又简单,而且Swiper使用又简单是吧: 头皮发麻,不喜欢说废话,我更喜欢直接看到效果: 按Swiper官方文档来说, ...
- 02_SQliteOpenHelper介绍&oncreate方法介绍
file:///D:/BaiduNetdiskDownload/adt-bundle-windows-x86_64_20140101/adt-bundle-windows-x86_64_2014010 ...
- OrderBy和OrderByDescending排序
昨天有练习对数字阵列进行排序,<C#阵列Array排序>https://www.cnblogs.com/insus/p/10825174.html 其实一切都弄得很复杂,array已经有2 ...
- 数据库路由中间件MyCat - 源代码篇(3)
此文已由作者张镐薪授权网易云社区发布. 欢迎访问网易云社区,了解更多网易技术产品运营经验. 2. 前端连接建立与认证 Title:MySql连接建立以及认证过程client->MySql:1.T ...
- 移动端专用css
通过设置css属性 -webkit-tap-highlight-color: rgba(0, 0, 0, 0);取消掉手机端webkit浏览器 点击按钮或超链接之类的 默认灰色背景色 设置css属性 ...
- lca最近公共祖先(st表/倍增)
大体思路 1.求出每个元素在树中的深度 2.用st表预处理的方法处理出f[i][j],f[i][j]表示元素i上方第2^j行对应的祖先是谁 3.将较深的点向上挪,直到两结点的深度相同 4.深度相同后, ...