IOS--UILabel的使用方法详细
IOS-UILabel的使用方法详细
//UILabel的使用
UILabel *oneLabel = [[UILabel alloc] init];
// 最经常使用的
oneLabel.frame = CGRectMake(0, 0, 320, 200); // 设置oneLabel的位置和大小
oneLabel.text = @"我是一个UILabel哦,"; // 设置oneLabel显示的字
oneLabel.textColor = [UIColor blackColor]; // 设置字体颜色
oneLabel.backgroundColor = [UIColor redColor]; // 设置背景色
oneLabel.backgroundColor = [UIColor clearColor]; // 可以设置透明背景色
oneLabel.alpha = 1.0; // 设置透明度 (范围是0.0-1.0之间)
// 字体和字体大小
oneLabel.font = [UIFont fontWithName:@"Helvetica" size:25.4f]; // 设置显示的字的字体和大小,当字体不存在时,大小也是无效的
oneLabel.font = [UIFont systemFontOfSize:35.0f]; // 只设置字体大小
oneLabel.font = [UIFont boldSystemFontOfSize:35.0f]; // 设置字体大小并为粗体
oneLabel.textAlignment = NSTextAlignmentCenter; // 设置字体的显示位置:左对齐、居中、右对齐
oneLabel.adjustsFontSizeToFitWidth = YES; // 设置字体大小自动适应高度
oneLabel.userInteractionEnabled = YES; // 设置是否可以与用户进行交互
oneLabel.enabled = YES; // 设置oneLabel的text是否可以改变,默认是YES
// 设置行数,前提是高度是足够的
// 设置行数为0,可以根据文本计算对应文本的高度宽度后,全部显示完全,默认单行显示
oneLabel.numberOfLines = 3;
// 设置是否可以高亮
oneLabel.highlighted = YES;
oneLabel.highlightedTextColor = [UIColor redColor];
// 设置阴影
oneLabel.shadowColor = [UIColor grayColor];
oneLabel.shadowOffset = CGSizeMake(2.0, 2.0);
//设置文字过长时的显示格式
oneLabel.lineBreakMode = NSLineBreakByClipping;
// typedef NS_ENUM(NSInteger, NSLineBreakMode) {
// NSLineBreakByWordWrapping = 0,
// NSLineBreakByCharWrapping,
// NSLineBreakByClipping,
// NSLineBreakByTruncatingHead,
// NSLineBreakByTruncatingTail,
// NSLineBreakByTruncatingMiddle
// }
//如果adjustsFontSizeToFitWidth属性设置为YES,这个属性就来控制文本基线的行为
oneLabel.baselineAdjustment = UIBaselineAdjustmentAlignBaselines;
// typedef enum {
// UIBaselineAdjustmentAlignBaselines,
// UIBaselineAdjustmentAlignCenters,
// UIBaselineAdjustmentNone,
// } UIBaselineAdjustment;
// 把oneLabel添加到view上面,并释放内存
[self.view addSubview:oneLabel];
[oneLabel release], oneLabel = nil;
// 附:
// NSLog(@"%@", [UIFont familyNames]); // 可以打印出全部存在的字体

UILabel 多行文字自动换行 (自动折行) 1.UIView *footerView = [[UIView alloc] initWithFrame:CGRectMake(10, 100, 300, 180)];
2. UILabel *label = [[UILabel alloc] initWithFrame:CGRectMake(10, 100, 300, 150)];
3. label.text = @"where are you? where are you? where are you? where are you? where are you? where are you? where are you? where are you? where are you? where are you?";
4. //清空背景颜色
5. label.backgroundColor = [UIColor clearColor];
6. //设置字体颜色为白色
7. label.textColor = [UIColor whiteColor];
8. //文字居中显示
9. label.textAlignment = UITextAlignmentCenter;
10. //自动折行设置
11. label.lineBreakMode = UILineBreakModeWordWrap;
12. label.numberOfLines = 0;

在iOS中默认的UILabel中的文字在竖直方向上只能居中对齐,博主参考国外网站,从UILabel继承了一个新类,实现了居上对齐,居中对齐,居下对齐。具体如下:
- //
- // myUILabel.h
- //
- //
- // Created by yexiaozi_007 on 3/4/13.
- // Copyright (c) 2013 yexiaozi_007. All rights reserved.
- //
- #import <UIKit/UIKit.h>
- typedef enum
- {
- VerticalAlignmentTop = 0, // default
- VerticalAlignmentMiddle,
- VerticalAlignmentBottom,
- } VerticalAlignment;
- @interface myUILabel : UILabel
- {
- @private
- VerticalAlignment _verticalAlignment;
- }
- @property (nonatomic) VerticalAlignment verticalAlignment;
- @end
- //
- // myUILabel.m
- //
- //
- // Created by yexiaozi_007 on 3/4/13.
- // Copyright (c) 2013 yexiaozi_007. All rights reserved.
- //
- #import "myUILabel.h"
- @implementation myUILabel
- @synthesize verticalAlignment = verticalAlignment_;
- - (id)initWithFrame:(CGRect)frame {
- if (self = [super initWithFrame:frame]) {
- self.verticalAlignment = VerticalAlignmentMiddle;
- }
- return self;
- }
- - (void)setVerticalAlignment:(VerticalAlignment)verticalAlignment {
- verticalAlignment_ = verticalAlignment;
- [self setNeedsDisplay];
- }
- - (CGRect)textRectForBounds:(CGRect)bounds limitedToNumberOfLines:(NSInteger)numberOfLines {
- CGRect textRect = [super textRectForBounds:bounds limitedToNumberOfLines:numberOfLines];
- switch (self.verticalAlignment) {
- case VerticalAlignmentTop:
- textRect.origin.y = bounds.origin.y;
- break;
- case VerticalAlignmentBottom:
- textRect.origin.y = bounds.origin.y + bounds.size.height - textRect.size.height;
- break;
- case VerticalAlignmentMiddle:
- // Fall through.
- default:
- textRect.origin.y = bounds.origin.y + (bounds.size.height - textRect.size.height) / 2.0;
- }
- return textRect;
- }
- -(void)drawTextInRect:(CGRect)requestedRect {
- CGRect actualRect = [self textRectForBounds:requestedRect limitedToNumberOfLines:self.numberOfLines];
- [super drawTextInRect:actualRect];
- }
- @end
在使用时:
- lbl_mylabel = [[myUILabel alloc] initWithFrame:CGRectMake(20, 50, 150, 600)];
- UIColor *color = [UIColor colorWithPatternImage:[UIImage imageNamed:@"halfTransparent.png"]];//使用半透明图片作为label的背景色
- lbl_mylabel.backgroundColor = color;
- lbl_mylabel.textAlignment = UITextAlignmentLeft;
- lbl_mylabel.textColor = UIColor.whiteColor;
- lbl_mylabel.lineBreakMode = UILineBreakModeWordWrap;
- lbl_mylabel.numberOfLines = 0;
- [lbl_mylabel setVerticalAlignment:VerticalAlignmentTop];
- [self addSubview:lbl_mylabel];
ios UILabel 变量名不能为title
-[UILabel copyWithZone:]: unrecognized selector sent to instance
label.lineBreakMode = NSLineBreakByTruncatingMiddle;

·UILable是iPhone界面最基本的控件,主要用来显示文本信息。
·常用属性和方法有:
1、创建
CGRect rect = CGRectMake(100, 200, 50, 50);
UILabel *label = [[UILabel alloc] initWithFrame:rect];
2、text //设置和读取文本内容,默认为nil
label.text = @”文本信息”; //设置内容
NSLog(@”%@”, label.text); //读取内容
3、textColor //设置文字颜色,默认为黑色
lable.textColor = [UIColor redColor];
4、font //设置字体大小,默认17
label.font = [UIFont systemFontOfSize:20]; //⼀一般方法
label.font = [UIFont boldSystemFontOfSize:20]; //加粗方法
label.font = [UIFont fontWithName:@"Arial" size:16]; //指定
字体的方法
//还有⼀一种从外部导入字体的方法。
5、textAlignment //设置标签文本对齐方式。
label.textAlignment = NSTextAlignmentCenter; //还有
NSTextAlignmentLeft、 NSTextAlignmentRight.
6、numberOfLines //标签最多显示行数,如果为0则表示多行。
label.numberOfLines = 2;
7、enabled //只是决定了Label的绘制方式,将它设置
为NO将会使文本变暗,表示它没有激活,这时向它设置颜色值是无效的。
label.enable = NO;
8、highlighted //是否高亮显示
label.highlighted = YES;
label.highlightedTextColor = [UIColor orangeColor]; //高亮
显示时的文本颜色
9、ShadowColor //设置阴影颜色
[label setShadowColor:[UIColor blackColor]];
10、ShadowOffset //设置阴影偏移量
[label setShadowOffset:CGSizeMake(-1, -1)];
11、baselineAdjustment //如果adjustsFontSizeToFitWidth属性设
置为YES,这个属性就来控制文本基线的行为。
label.baselineAdjustment = UIBaselineAdjustmentNone;
UIBaselineAdjustmentAlignBaselines = 0,默认,文本最上端与中线对齐。
UIBaselineAdjustmentAlignCenters, 文本中线与label中线对齐。
UIBaselineAdjustmentNone, 文本最低端与label中线对齐。
12、Autoshrink //是否自动收缩
Fixed Font Size 默认,如果Label宽度小于文字长度时时,文字大小不自动缩放
minimumScaleFactor 设置最小收缩比例,如果Label宽度小于文字长度时,文字
进行收缩,收缩超过比例后,停止收缩。
minimumFontSize 设置最小收缩字号,如果Label宽度小于文字长度时,文字字号
减小,低于设定字号后,不再减小。//6.0以后不再使用了。
label.minimumScaleFactor = 0.5;
13、adjustsLetterSpacingToFitWidth //改变字母之间的间距来适应Label大小
myLabel.adjustsLetterSpacingToFitWidth = NO;
14、 lineBreakMode //设置文字过长时的显示格式
label.lineBreakMode = NSLineBreakByCharWrapping;以字符为显示单位显
示,后面部分省略不显示。
label.lineBreakMode = NSLineBreakByClipping;剪切与文本宽度相同的内
容长度,后半部分被删除。
label.lineBreakMode = NSLineBreakByTruncatingHead;前面部分文字
以……方式省略,显示尾部文字内容。
label.lineBreakMode = NSLineBreakByTruncatingMiddle;中间的内容
以……方式省略,显示头尾的文字内容。
label.lineBreakMode = NSLineBreakByTruncatingTail;结尾部分的内容
以……方式省略,显示头的文字内容。
label.lineBreakMode = NSLineBreakByWordWrapping;以单词为显示单位显
示,后面部分省略不显示。
15、 adjustsFontSizeToFitWidth //设置字体大小适应label宽度
label.adjustsFontSizeToFitWidth = YES;
16、attributedText:设置标签属性文本。
NSString *text = @"first";
NSMutableAttributedString *textLabelStr =
[[NSMutableAttributedString alloc]
initWithString:text];
[textLabelStr
setAttributes:@{NSForegroundColorAttributeName :
[UIColor lightGrayColor], NSFontAttributeName :
[UIFont systemFontOfSize:17]} range:NSMakeRange(11,
10)];
label.attributedText = textLabelStr;
17、竖排文字显示每个文字加一个换行符,这是最方便和简单的实现方式。
label.text = @"请\n竖\n直\n方\n向\n排\n列";
label.numberOfLines = [label.text length]; 18、计算UIlabel 随字体多行后的高度
CGRect bounds = CGRectMake(0, 0, 200, 300);
heightLabel = [myLabel textRectForBounds:bounds
limitedToNumberOfLines:20]; //计算20行后的Label的Frame
NSLog(@"%f",heightLabel.size.height);
19、UILabel根据字数多少自动实现适应高度
UILabel *msgLabel = [[UILabel alloc]
initWithFrame:CGRectMake(15, 45, 0, 0)];
msgLabel.backgroundColor = [UIColor lightTextColor];
[msgLabel setNumberOfLines:0];
msgLabel.lineBreakMode = UILineBreakModeWordWrap;
msgLabel.font = [UIFont fontWithName:@"Arial" size:12];
CGSize size = CGSizeMake(290, 1000);
msgLabel.text = @"获取到的deviceToken,我们可以通过webservice服务提
交给.net应用程序,这里我简单处理,直接打印出来,拷贝到.net应用环境中使
用。";
CGSize msgSie = [msgLabel.text sizeWithFont:fonts
constrainedToSize:size];
[msgLabel setFrame:CGRectMake(15, 45, 290, msgSie.height)]; 20、渐变字体Label
UIColor *titleColor = [UIColor colorWithPatternImage:[UIImage
imageNamed:@"btn.png"]];
NSString *title = @"Setting";
UILabel *titleLabel = [[UILabel alloc]
initWithFrame:CGRectMake(0, 0, 80, 44)];
titleLabel.textColor = titleColor;
titleLabel.text = title;
titleLabel.font = [UIFont boldSystemFontOfSize:20];
titleLabel.backgroundColor = [UIColor clearColor];
[self.view addSubview:titleLabel];
[titleLabel release];
21、Label添加边框
titleLabel.layer.borderColor = [[UIColor grayColor] CGColor];
titleLabel.layer.borderWidth = 2;

IOS--UILabel的使用方法详细的更多相关文章
- iOS App上架流程(2016详细版)
iOS App上架流程(2016详细版) 原文地址:http://www.jianshu.com/p/b1b77d804254 感谢大神整理的这么详细 一.前言: 作为一名iOSer,把开发出来的Ap ...
- iOS与HTML5交互方法总结(转)
今天小编在找技术文章的时候,发现这样一个标题:iOS与HTML5交互方法总结,怎么看着这么熟悉呢? 还以为是刚哥用了别的文章,点进去一看,原来是刚哥自己写的文章,他们转载的,而且还上了Dev St ...
- iOS UILabel UITextView UIButton 等等显示文本行间距
iOS UILabel UITextView UIButton 等等显示文本行间距都用如下方法 NSMutableParagraphStyle *paragraphStyle = [[NSMutab ...
- [iOS]数据库第三方框架FMDB详细讲解
[iOS]数据库第三方框架FMDB详细讲解 初识FMDB iOS中原生的SQLite API在进行数据存储的时候,需要使用C语言中的函数,操作比较麻烦.于是,就出现了一系列将SQLite API进行封 ...
- 模式识别 - libsvm该函数的调用方法 详细说明
libsvm该函数的调用方法 详细说明 本文地址: http://blog.csdn.net/caroline_wendy/article/details/26261173 须要载入(load)SVM ...
- iOS UILabel 文字 置顶/置底 实现
iOS UILabel控件默认文字位置是居中的,如图所示: 但是我们经常碰到这样的需求,希望文字向上置顶,或者向下置底,但是很遗憾,iOS API中并没有提供相应的属性和方法,需要我们手动设置. 利用 ...
- iOS数据库操作之coredata详细操作步骤
CHENYILONG Blog iOS数据库操作之coredata详细操作步骤 技术博客http://www.cnblogs.com/ChenYilong/ 新浪微博http://weibo.com/ ...
- iOS与HTML5交互方法总结(修正)
摘要 看了不少别人写的博客或者论坛,关于iOS与HTML5交互方法大概主要有5种方式: 1. 利用WKWebView进行交互(系统API) 2. 利用UIWebView进行交互(系统API) 3. 苹 ...
- iOS-提高iOS开发效率的方法和工具
提高iOS开发效率的方法和工具 介绍 这篇文章主要是介绍一下我在iOS开发中使用到的一些可以提升开发效率的方法和工具. IDE 首先要说的肯定是IDE了,说到IDE,Xcode不能跑,当然你也可能同时 ...
随机推荐
- request.setAttribute()用法
小问题: JSP1代码 String [] test=new String[2]; test[0]="1"; test[1]="2"; request.setA ...
- NIO与普通IO文件读写性能对比
最近在熟悉java的nio功能.nio采用了缓冲区的方式进行文件的读写,这一点更接近于OS执行I/O的方式.写了个新旧I/O复制文件的代码,练练手,顺便验证一下两者读写性能的对比,nio是否真的比普通 ...
- Myeclipse2013 SVN安装方法
1. 打开Help下的Install from Site 2. 弹出窗口,如下图: 3. 点击Add标签,如图: 在对话框Name输入Svn, URL中输入:http://subclipse.tigr ...
- poj 2240 Arbitrage (Floyd)
链接:poj 2240 题意:首先给出N中货币,然后给出了这N种货币之间的兑换的兑换率. 如 USDollar 0.5 BritishPound 表示 :1 USDollar兑换成0.5 Britis ...
- 10个精妙的Java编码最佳实践
这是一个比Josh Bloch的Effective Java规则更精妙的10条Java编码实践的列表.和Josh Bloch的列表容易学习并且关注日常情况相比,这个列表将包含涉及API/SPI设计中不 ...
- Qt 学习之路:输入元素
前面的章节中,我们看到了作为输入元素的MouseArea,用于接收鼠标的输入.下面,我们再来介绍关于键盘输入的两个元素:TextInput和TextEdit. TextInput是单行的文本输入框,支 ...
- spring beans源码解读之--BeanFactory进化史
BeanFactory是访问bean容器的根接口,它是一个bean容器的基本客户端视图. 先让我们看看beanfactory的前生后世吧! beanFactory有四个重要的子接口: SimpleJn ...
- JS 拼凑字符串
和Java一样,JS中直接用"+"号拼凑字符串是很耗费资源的,所以在大量拼凑字符串的情景中,我们也需要一个类似于StringBuffer的工具, 下面利用Array.join()方 ...
- oracle 导出导入数据
在window的运行中输出cmd,然后执行下面的一行代码, imp blmp/blmp@orcl full=y file=D:\blmp.dmp OK,问题解决.如果报找不到该blmp.dmp文件,就 ...
- Android TV 模拟器启动
模拟器启动错误 使用IntelCPU的模拟器 http://software.intel.com/en-us/android/articles/intel-hardware-accelerated-e ...