Digilent Xilinx USB Jtag cable】的更多相关文章

Digilent Xilinx USB Jtag cable 安装环境 操作系统:fedora 20 64bit 源链接:https://wiki.gentoo.org/wiki/Xilinx_USB_JTAG_Programmers#Digilent_Xilinx_USB_JTAG_cable 下载软件 Digilent Plugin for Xilinx Tools Digilent Adept Runtime x86/x64 Digilent Adept Utilities x86/x64…
  关于Xilinx FPGA JTAG下载时菊花链路中的芯片数量 emesjx | 2014-08-13 13:13:30    阅读:1793   发布文章 当一个系统中含有多片(2片以上)Xilinx FPGA.CPLD或PROM(FLASH)时,可采用单一JTAG口以菊花链(Daisy Chain)形式将所有芯片串联起来实现下载编程,如下图所示.这样做有两个好处:(1)可以节省多个JTAG口所占用的PCB空间,特别适合空间有限的嵌入式系统,如小型工业摄像机等:(2)嵌入式系统处于封闭环境…
  今天程序烧录后,进行调试时keil提示:Could not stop Cortex-M device!  please check the JTAG cable   如图: 于是我在网上搜了一下,发现与stm32的三种启动方式有关(我听信别人,如果使用swd下载程序,则boot0就可以悬空,才导致出现flash锁死),于是我将程序擦除后,并用短接帽将boot0接地,boot1此时可以作它用,重新进入调试时,就可以正常使用的了. stm32的3种启动模式:   (1)  用户闪存 : 正常的工…
NetFPGA-1G-CML从零开始环境配置 前言 偶得一块NetFPGA-1G-CML,跟着github对NetFPGA-1G-CML的入门指南,一步步把配置环境终于搭建起来,下面重新复现一下此过程.期间感谢开发板的技术人员支持与帮助,得以成功配置环境. https://github.com/NetFPGA/NetFPGA-public/wiki/NetFPGA-1G-CML-Getting-Started-Guide 实验工具 NetFPGA-1G-CML开发板 一台有PCIe口的主机 下为…
http://debugmo.de/2012/02/xvcd-the-xilinx-virtual-cable-daemon/ I recently discovered an almost undocumented function in Xilinx ISE: the Xilinx virtual cable driver. It’s basically “a platform cable without a platform cable” (as marcan said so nicely…
http://www.ethernut.de/en/hardware/turtelizer/ Introducing Turtelizer 2 Overview Turtelizer 2 had been developed to provide JTAG Flash programming and debugging of ARM based boards via USB. Typical target boards are Ethernut 3 , the Elektor Internet…
About USB Data Link Cable API The text on this webpage is licensed under the Creative Commons Attribution-Sharealike 3.0 Unported License (CC-BY-SA) and  GNU Free Documentation License About USB Data Link Cable Application Programming Interface (API)…
Failed to connect to Xilinx hw_server. Check if the  hw_server is running and correct TCP port is used. 由于我用的  是 nexys 3 的usb jtag  解决方法   xilinx tools->configure jtag settings type : 选择为   Digilent usb cable  这样就  可以了   亲测有效~~~happy 转自 http://blog.s…
发现个USB ID站点,对于做设备管理识别的小伙伴特别实用 http://www.linux-usb.org/usb.ids 附录: # # List of USB ID's # # Maintained by Stephen J. Gowdy <linux.usb.ids@gmail.com> # If you have any new entries, please submit them via # http://www.linux-usb.org/usb-ids.html # or s…
用户在调试内嵌可综合内核的 CPU 如 ARM7TDMI-S 时,需要通过打开仿真器的自适应时钟功能. 此时,ARM仿真器根据 RTCK 时钟信号的频率,产生可用于 CPU 内核当前时钟主频的最快的 TCK 时钟. 即 ARM 内核的时钟主频变化,引起 RTCK 变化, 仿真器根据 RTCK 的变化,产生合适的最快的 TCK 时钟. 如果没有有效的 RTCK 信号,用户不能使用自适应时钟功能.这种情况下,用户可以设置 TCK 为比较低的频率. 当用户确认 CPU 运行在比较高的频率的情况下,可以…