NetFPGA-1G-CML点亮 LED

前言

用vivado建立工程的时候选择的型号为：XC7K325tffg676-1

在以下代码文件中，仿真与设计都没有问题。在xdc文件中的时钟约束与锁相环配置中还存在问题，没有寻找到解决办法

使用手册链接

原理图链接

---

design文件

`timescale 1ns / 1ps

module led_des(output reg[1:0] led = 2'b01,
                input wire CLK);

    reg[32:0] count = 0;
    parameter T1MS = 3;

    always@(posedge CLK)
    begin
        count <= count + 1;
        if(count > T1MS)
        begin
            count <= 0;
            if(led == 2'b01)
            begin
                led <= 2'b10;
            end
            else
            begin
                led <= 2'b01;
            end
        end
    end
endmodule

sim仿真文件

`timescale 1ns / 1ps

module led_sim;
reg CLK;
wire [1:0] led;

initial
begin
    #100
    CLK = 0;
end
always #10 CLK = ~CLK;

led_des led_des_inst(
    .CLK(CLK),
    .led(led)
);

endmodule

xdc约束文件

create_clock -period 100.000 -name CLK -waveform {0.000 50.000} [get_ports CLK]
#create_clock -name clk100MHZ -period 10.0 [get_ports {CLK}] 

set_property PACKAGE_PIN E18 [get_ports {CLK}]
set_property IOSTANDARD LVCMOS33 [get_ports {CLK}]

set_property PACKAGE_PIN E17 [get_ports {led[0]}]
set_property IOSTANDARD LVCMOS33 [get_ports {led[0]}]

set_property PACKAGE_PIN F17 [get_ports {led[1]}]
set_property IOSTANDARD LVCMOS33 [get_ports {led[1]}]