Geometry Surface of OpenCascade BRep eryar@163.com 摘要Abstract:几何曲面是参数表示的曲面 ,在边界表示中其数据存在于BRep_TFace中,BRep_TFace中不仅包括了几何曲线,还包含用于显示的离散几何信息,如三角剖分数据.本文主要对OpenCascade的BRep表示中几何曲面进行说明,将在后面分析Topology部分的读写程序时来说明包含几何数据的三种拓朴结构中分别包括哪些几何信息. 关键字Key Words:OpenCasca…

Geometry Curve of OpenCascade BRep eryar@163.com 摘要Abstract:几何曲线是参数表示的曲线 ,在边界表示中其数据存在于BRep_TEdge中,BRep_TEdge中不仅包括了几何曲线,还包含其他类型的几何信息.本文主要对OpenCascade的BRep表示中几何曲线进行说明,将在后面分析Topology部分的读写程序时来说明这三种拓朴结构中分别包括哪些几何信息. 关键字Key Words:OpenCascade BRep, Geometry…

Representation Data in OpenCascade BRep eryar@163.com 摘要Abstract:现在的显示器大多数是光栅显示器,即可以看做一个像素的矩阵.在光栅显示器上显示的任何图形,实际上都是一些具有一种或多种颜色的集合.数学上精确表示的图形在显示器中只能用逼近的方式显示出来.本文主要对OpenCascade的BRep文件中用来显示曲线和曲面的离散数据结构进行说明. 关键字:OpenCascade, BRep, Polygon, Triangulation,…

OpenCASCADE BRep vs. OpenNURBS BRep eryar@163.com Abstract. BRep short for Boundary Representation. First give the definition of the BRep, then compare the BRep mode between OpenCASCADE and OpenNURBS. There are 3 main representation method: use face/…

Topology Shapes of OpenCascade BRep eryar@163.com 摘要Abstract:通过对OpenCascade中的BRep数据的读写,理解边界表示法的概念及实现.理解了拓朴形状的数据结构,就对ModelingData模块有了清晰认识,方便OpenCascade其他模块如ModelingAlgorithms和Visiualization模块的理解. 关键字Key Words:OpenCascade, BRep, Topology, BRep Format 一…

OpenCASCADE BRep Projection eryar@163.com 一网友发邮件问我下图所示的效果如何在OpenCASCADE中实现,我的想法是先构造出螺旋线,再将螺旋线投影到面上. 为了验证我的想法,结合原来螺旋线的造型算法,来测试下这种效果的实现.依然采用Tcl脚本在Draw Test Harness中试验.个人觉得高效使用OpenCASCADE的方法应该也是先用Tcl脚本来验证一些想法后,再根据使用到的命令找到OpenCASCADE中DRAW的命令实现,最后再可以根据DRA…

OpenCascade BRep Format Description eryar@163.com 摘要Abstract:本文结合OpenCascade的BRep格式描述文档和源程序,对BRep格式进行分析,详细说明BRep的数据组织形式.结合源程序,可以对OpenCascade中Modeling Data模块中的模型数据结构进行理解. 关键字Key Words:OpenCascade, BRep Format, ModelingData 一.引言 Introduction OpenCascad…

Locations Section of OpenCascade BRep eryar@163.com 摘要Abstract:本文结合OpenCascade的BRep格式描述文档和源程序,对BRep格式进行分析,详细说明BRep的数据组织形式.本文主要通过对BRep文件中的Locations部分的读写代码进行分析,来完全理解OpenCascade中的Location部分. 关键字Key Words:OpenCascade, BRep Format, Location, Location Set…

OpenCascade BRep Format Description eryar@163.com 摘要Abstract:本文结合OpenCascade的BRep格式描述文档和源程序,对BRep格式进行分析,详细说明BRep的数据组织形式.结合源程序,可以对OpenCascade中Modeling Data模块中的模型数据结构进行理解. 关键字Key Words:OpenCascade, BRep Format, ModelingData 一.实例分析 OpenCascade的data目录中的f…

OpenCASCADE Linear Extrusion Surface eryar@163.com Abstract. OpenCASCADE linear extrusion surface is a generalized cylinder. Such a surface is obtained by sweeping a curve (called the “extruded curve” or “basis”) in a given direction (referred to as…

OpenCascade Primitives BRep - Box eryar@163.com Abstract. BRep is short for Boundary Representation. Boundary Representation gives a complete description of an object by associating topological and geometric information for solid modeling. In this ca…

在OpenSceneGraph中绘制OpenCascade的曲面 Render OpenCascade Geometry Surfaces in OpenSceneGraph eryar@163.com 摘要Abstract:本文对OpenCascade中的几何曲面数据进行简要说明,并结合OpenSceneGraph将这些曲面显示. 关键字Key Words:OpenCascade.OpenSceneGraph.Geometry Surface.NURBS 一.引言 Introduction <…

OpenCascade Primitives BRep - Sphere eryar@163.com Abstract. BRep is short for Boundary Representation. Boundary Representation gives a complete description of an object by associating topological and geometric information for solid modeling. In this…

在OpenSceneGraph中绘制OpenCascade的曲线 Render OpenCascade Geometry Curves in OpenSceneGraph eryar@163.com 摘要Abstract:本文简要说明OpenCascade中几何曲线的数据,并将这些几何曲线在OpenSceneGraph中绘制出来. 关键字KeyWords:OpenCascade.Geometry Curve.OpenSceneGraph.B-Spline.NURBS 一.引言 Introduct…

OpenCascade Ruled Surface eryar@163.com Abstract. A ruled surface is formed by moving a line connecting points of equal relative arc length or equal relative parametric value on two parametric curves from a start point to a terminate point on the cur…

OpenCASCADE PCurve of Topological Face eryar@163.com Abstract. OpenCASCADE provides a class BRepBuilderAPI_MakeFace to build topological faces. A face maybe built from a surface, elementary surface from gp package, surface from Geom, from a wire and…

OpenNURBS to OpenCASCADE eryar@163.com Abstract. The OpenNURBS initiative provides CAD/CAM/CAE and computer graphics software developers the tools to accurately transfer 3D geometry between applications. The OpenNURBS C++ source code is clean and fai…

Mesh Algorithm in OpenCascade eryar@163.com Abstract. Rendering a generic surface is a two steps process: first, computing the points that will form the mesh of the surface and then, send this mesh to 3D API. Use the Triangle to triangulate the param…

OpenCASCADE Ring Type Spring Modeling eryar@163.com Abstract. The general method to directly create an edge is to give a 3D curve as the support(geometric domain) of the edge. The curve maybe defined as a 2D curve in the parametric space of a surface…

Make Helix Curve in OpenCASCADE eryar@163.com Abstract. OpenCASCADE does not provide helix curve directly, but you can build a helix curve by the pcurve of a surface(curve on surface). When you understand the pcurve of a surface, you can make a helix…

OpenCASCADE Make Primitives-Box eryar@163.com Abstract. By making a simple box to demonstrate the BRep data structure of the OpenCASCADE. The construction method is different from BRepPrimAPI_MakeBox. In the paper construct the box from vertex, edge…

Visualize Surface by Delaunay Triangulator eryar@163.com Abstract. Delaunay Triangulation is the core algorithm for mesh generation. By Delaunay Triangulator you can make a general method to visualize geometry surfaces, so does OpenCascade. The paper…

OpenCascade Primitives BRep-Cone eryar@163.com Abstract. BRep is short for Boundary Representation. Boundary Representation gives a complete description of an object by associating topological and geometric information for solid modeling. In this cas…

OpenCascade Primitives BRep-Torus eryar@163.com Abstract. BRep is short for Boundary Representation. Boundary Representation gives a complete description of an object by associating topological and geometric information for solid modeling. In this ca…

OpenCascade Primitives BRep-Cylinder eryar@163.com Abstract. BRep is short for Boundary Representation. Boundary Representation gives a complete description of an object by associating topological and geometric information for solid modeling. In this…

源自于百度百科:实体造型--- 三维模型特征表示方法: 计算机中表示三维形体的模型,按照几何特点进行分类,大体上可以分为三种:线框模型.表面模型和实体模型.如果按照表示物体的方法进行分类,实体模型基本上可以分为分解表示.构造表示CSG(Constructive Solid Geometry)和边界表示BREP(Boundary Representation)三大类. 常用的分解表示法有:四叉树.八叉树.多叉树.BSP树等等. 构造表示的主要方法:扫描表示.构造实体几何表示.特征和参数化表示.  …

2015/6/4 Open CASCADE Technology: IGES Support http://www.opencascade.org/doc/occt­6.7.0/overview/html/user_guides__iges.html 1/35 Table of Contents Introduction Reading IGES Procedure Domain covered Translatable entities Attributes Administrative da…

OCCT模块结构图 基础类: Foundation Classes module underlies all other OCCT classes; 模型数据: Modeling Data module supplies data structures to represent 2D and 3D geometric primitives and their compositions into CAD models; 模型算法: Modeling Algorithms module contai…

#include <osgDB/ReadFile> #include <osgViewer/Viewer> #include <osgGA/StateSetManipulator> #include <osgViewer/ViewerEventHandlers> #include <osg/Vec3> #include <osg/Array> #include <osg/Geode> #include <osg/Gr…

Computer-aided design (CAD) is the use of computers (or workstations) to aid in the creation, modification, analysis, or optimization of a design.[1] CAD software is used to increase the productivity of the designer, improve the quality of design, im…